如何恢复交换机出厂值

最新推荐文章于 2023-06-24 18:11:30 发布

原创最新推荐文章于 2023-06-24 18:11:30 发布 · 307 阅读

0 ·

CC 4.0 BY-SA版权

如何恢复交换机出厂值<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" />

实验地点:2楼第三机房

实验环境： 11号计算机,2号交换机

/*****************************************************************************/

远程登陆

开始—运行---telnet 172.16.3.200

User Access Verification

Username: benet.cn

Password:

swich-Server#clear line tty 2

[confirm]

[OK]

swich-Server#clear line tty 2

[confirm]

[OK]

swich-Server#clear line tty 2

[confirm]

[OK]

swich-Server#s2

Trying s2 (<?xml:namespace prefix = st1 ns = "urn:schemas-microsoft-com:office:smarttags" />1.1.1.1, 2002)... Open

/***********************************************************************/

Switch#erase startup-config

Erasing the nvram filesystem will remove all files! Continue? [confirm]

[OK]

Erase of nvram: complete

Switch#reload

System configuration has been modified. Save? [yes/no]: y

Building configuration...

[OK]

Proceed with reload? [confirm]

00:34:55: %SYS-5-RELOAD: Reload requested

C2950 Boot Loader (C2950-HBOOT-M) Version 12.1(6)EA2c, RELEASE SOFTWARE (fc1)

Compiled Thu 28-Feb-02 14:59 by antonino

WS-C2950-24 starting...

Base ethernet MAC Address: 00:09:b7:8c:74:40

Xmodem file system is available.

Initializing Flash...

flashfs[0]: 18 files, 2 directories

flashfs[0]: 0 orphaned files, 0 orphaned directories

flashfs[0]: Total bytes: 7741440

flashfs[0]: Bytes used: 3978752

flashfs[0]: Bytes available: 3762688

flashfs[0]: flashfs fsck took 6 seconds.

...done initializing flash.

Boot Sector Filesystem (bs:) installed, fsid: 3

Parameter Block Filesystem (pb:) installed, fsid: 4

Loading "flash:c2950-i6q4l2-mz.121-6.EA2c.bin"...###############################

################################################################################

File "flash:c2950-i6q4l2-mz.121-6.EA2c.bin" uncompressed and installed, entry po

int: 0x80010000

executing...

Restricted Rights Legend

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph

Rights clause at FAR sec. 52.227-19 and subparagraph

Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.

170 West Tasman Drive

San Jose, California95134-1706

Cisco Internetwork Operating System Software

IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(6)EA2c, RELEASE SOFTWARE

(fc1)

Compiled Thu 28-Feb-02 14:44 by antonino

Image text-base: 0x80010000, data-base: 0x8042C000

Initializing flashfs...

flashfs[1]: 18 files, 2 directories

flashfs[1]: 0 orphaned files, 0 orphaned directories

flashfs[1]: Total bytes: 7741440

flashfs[1]: Bytes used: 3978752

flashfs[1]: Bytes available: 3762688

flashfs[1]: flashfs fsck took 6 seconds.

flashfs[1]: Initialization complete.

Done initializing flashfs.

POST: System Board Test : Passed

POST: Ethernet Controller Test : Passed

ASIC Initialization Passed

POST: FRONT-END LOOPBACK TEST : Passed

cisco WS-C2950-24 (RC32300) processor (revision C0) with 21295K bytes of memory.

Processor board ID FOC0620Z0D0

Last reset from system-reset

Running Standard Image

24 FastEthernet/IEEE 802.3 interface(s)

32K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address: 00:09:B7:8C:74:40

Motherboard assembly number: 73-5782-10

Power supply part number: 34-0965-01

Motherboard serial number: FOC06190PMS

Power supply serial number: DAB06193H3L

Model revision number: C0

Motherboard revision number: A0

Model number: WS-C2950-24

System serial number: FOC0620Z0D0

Press RETURN to get started!

00:00:17: %SYS-5-CONFIG_I: Configured from memory by console

00:00:17: %SYS-5-RESTART: System restarted --

Cisco Internetwork Operating System Software

IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(6)EA2c, RELEASE SOFTWARE

(fc1)

Compiled Thu 28-Feb-02 14:44 by antonino

00:00:17: %LINK-5-CHANGED: Interface Vlan1, changed state to administratively do

00:00:18: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state t

o down

Switch>