19rtuoqy3c html,Asus Laptop Extras

Dear Linux ACPI developers,

I was able to obtain one of the first all-new ASUS W3400N notebooks

delivered (W3479NLP), and first of all I'd like to thank all the

contributors to the linux kernel who did such a good job that in

general, this new hardware works very well under Linux!

However, there are a few things left to get running, and other things

that I haven't tested, yet.

While e.g. cat /proc/acpi/battery/BAT0/info works and delivers

correct information, the most important thing to me that does

not work yet is reading the state of the battery:

> cat /proc/acpi/battery/BAT0/state

returns nothing, the following is emitted to /var/log/messages:

kernel: dswstate-0277 [83] ds_result_pop_from_bot: No result objects! State=f7c8a428

kernel: dsutils-0547 [83] ds_create_operand : Missing or null operand, AE_AML_NO_RETURN_VALUE

kernel: dsutils-0640 [82] ds_create_operands : While creating Arg 2 - AE_AML_NO_RETURN_VALUE

kernel: psparse-1138: *** Error: Method execution failed [\_SB_.BAT0._BST] (Node f7f8b328), AE_AML_NO_RETURN_VALUE

kernel: acpi_battery-0208 [73] acpi_battery_get_statu: Error evaluating _BST

The kernel running is a plain 2.6.10 with no modifications as of yet

(ACPI debug info enabled).

Find attached:

- The content of /proc/acpi/dsdt as gziped file attachment (asus_w3479_dsdt.gz)

- The content of /var/log/dmesg (inline plaintext below)

- The content of /var/log/messages (inline plaintext below)

- The output of "lspci -vv" (inline plaintext below)

There are some ACPI-related error messages visible in /var/log/dmesg, see below.

A minor thing that does not work is

> cat /proc/acpi/asus/

kernel: Asus ACPI: Error reading LCD status

while switching on the WLAN-indicator LED using "echo 1 >/proc/acpi/asus/wled" does work.

Thanks in advance for any help you might be able to provide!

If I can provide other useful information to identify the problem,

just ask.

Regards,

Lutz Vieweg

---------------------- /var/log/dmesg ----------------------------------

Linux version 2.6.10 (root@...) (gcc version 3.4.3) #3 Fri Feb 11 01:43:15 CET 2005

BIOS-provided physical RAM map:

BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)

BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)

BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)

BIOS-e820: 0000000000100000 - 000000003ff40000 (usable)

BIOS-e820: 000000003ff40000 - 000000003ff50000 (ACPI data)

BIOS-e820: 000000003ff50000 - 0000000040000000 (ACPI NVS)

127MB HIGHMEM available.

896MB LOWMEM available.

On node 0 totalpages: 261952

DMA zone: 4096 pages, LIFO batch:1

Normal zone: 225280 pages, LIFO batch:16

HighMem zone: 32576 pages, LIFO batch:7

DMI 2.3 present.

ACPI: RSDP (v000 ACPIAM ) @ 0x000f5de0

ACPI: RSDT (v001 A M I OEMRSDT 0x01000513 MSFT 0x00000097) @ 0x3ff40000

ACPI: FADT (v001 A M I OEMFACP 0x01000513 MSFT 0x00000097) @ 0x3ff40200

ACPI: OEMB (v001 A M I OEMBIOS 0x01000513 MSFT 0x00000097) @ 0x3ff50040

ACPI: DSDT (v001 1ABSP 1ABSP001 0x00000001 MSFT 0x02000001) @ 0x00000000

ACPI: PM-Timer IO Port: 0x408

Built 1 zonelists

Kernel command line: ro root=/dev/hda6

Found and enabled local APIC!

mapped APIC to ffffd000 (fee00000)

Initializing CPU#0

CPU 0 irqstacks, hard=c047a000 soft=c0479000

PID hash table entries: 4096 (order: 12, 65536 bytes)

Detected 2000.186 MHz processor.

Using pmtmr for high-res timesource

Console: colour VGA+ 80x25

Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

Memory: 1033984k/1047808k available (2443k kernel code, 13152k reserved, 904k data, 184k init, 130304k highmem)

Checking if this processor honours the WP bit even in supervisor mode... Ok.

Calibrating delay loop... 3964.92 BogoMIPS (lpj=1982464)

Security Framework v1.0.0 initialized

Capability LSM initialized

Mount-cache hash table entries: 512 (order: 0, 4096 bytes)

CPU: After generic identify, caps: afe9fbbf 00000000 00000000 00000000

CPU: After vendor identify, caps: afe9fbbf 00000000 00000000 00000000

CPU: L1 I cache: 32K, L1 D cache: 32K

CPU: L2 cache: 2048K

CPU: After all inits, caps: afe9fbbf 00000000 00000000 00000040

Intel machine check architecture supported.

Intel machine check reporting enabled on CPU#0.

CPU: Intel(R) Pentium(R) M processor 2.00GHz stepping 06

Enabling fast FPU save and restore... done.

Enabling unmasked SIMD FPU exception support... done.

Checking 'hlt' instruction... OK.

tbxface-0118 [02] acpi_load_tables : ACPI Tables successfully acquired

Parsing all Control

Methods:..................................................................................................

..............................................................................................................................

..................................

Table [DSDT](id F004) - 953 Objects with 56 Devices 258 Methods 28 Regions

ACPI Namespace successfully loaded at root c0494600

ACPI: setting ELCR to 0200 (from 0ea0)

evxfevnt-0094 [03] acpi_enable : Transition to ACPI mode successful

checking if image is initramfs... it is

Freeing initrd memory: 296k freed

NET: Registered protocol family 16

PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2

PCI: Using configuration type 1

mtrr: v2.0 (20020519)

ACPI: Subsystem revision 20041105

evgpeblk-0979 [06] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9

evgpeblk-0987 [06] ev_create_gpe_block : Found 7 Wake, Enabled 8 Runtime GPEs in this block

Completing Region/Field/Buffer/Package

initialization:........................................................................

..........................................................

Initialized 27/28 Regions 34/35 Fields 44/44 Buffers 25/25 Packages (962 nodes)

Executing all Device _STA and_INI methods:.............................................evregion-0309 [20]

ev_address_space_dis

pa: No handler for Region [ECOR] (f7f821a8) [EmbeddedControl]

exfldio-0265: *** Error: Region EmbeddedControl(3) has no handler

psparse-1138: *** Error: Method execution failed [\_SB_.PCI0.SBRG.EC0_.ACS_] (Node f7f864a8), AE_NOT_EXIST

psparse-1138: *** Error: Method execution failed [\_SB_.AC__._INI] (Node f7f889e8), AE_NOT_EXIST

nsinit-0414 [06] ns_init_one_device : \_SB_.AC__._INI._INI failed: AE_NOT_EXIST

..evregion-0309 [22] ev_address_space_dispa: No handler for Region [ECOR] (f7f821a8) [EmbeddedControl]

exfldio-0265: *** Error: Region EmbeddedControl(3) has no handler

psparse-1138: *** Error: Method execution failed [\_SB_.PCI0.SBRG.EC0_.BATS] (Node f7f86468), AE_NOT_EXIST

psparse-1138: *** Error: Method execution failed [\_SB_.BAT0._STA] (Node f7f8b2e8), AE_NOT_EXIST

uteval-0158: *** Error: Method execution failed [\_SB_.BAT0._STA] (Node f7f8b2e8), AE_NOT_EXIST

.............

60 Devices found containing: 59 _STA, 3 _INI methods

ACPI: Interpreter enabled

ACPI: Using PIC for interrupt routing

ACPI: PCI Root Bridge [PCI0] (00:00)

PCI: Probing PCI hardware (bus 00)

PCI: Enabled i801 SMBus device

PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1

PCI: Transparent bridge - 0000:00:1e.0

ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]

ACPI: Embedded Controller [EC0] (gpe 28)

ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]

ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]

ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)

ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 11 12)

ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)

ACPI: PCI Interrupt Link [LNKD] (IRQs *5 6 10)

ACPI: PCI Interrupt Link [LNKE] (IRQs 6 11) *0, disabled.

ACPI: PCI Interrupt Link [LNKF] (IRQs 3 7) *0, disabled.

ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7) *0, disabled.

ACPI: PCI Interrupt Link [LNKH] (IRQs 4 6 *10 12)

Linux Plug and Play Support v0.97 (c) Adam Belay

pnp: PnP ACPI init

pnp: PnP ACPI: found 14 devices

usbcore: registered new driver usbfs

usbcore: registered new driver hub

PCI: Using ACPI for IRQ routing

** PCI interrupts are no longer routed automatically. If this

** causes a device to stop working, it is probably because the

** driver failed to call pci_enable_device(). As a temporary

** workaround, the "pci=routeirq" argument restores the old

** behavior. If this argument makes the device work again,

** please email the output of "lspci" to bjorn.helgaas@...

** so I can fix the driver.

pnp: 00:07: ioport range 0xa00-0xa0f has been reserved

pnp: 00:0b: ioport range 0x540-0x55f has been reserved

pnp: 00:0b: ioport range 0x400-0x47f could not be reserved

pnp: 00:0b: ioport range 0x500-0x53f has been reserved

pnp: 00:0b: ioport range 0x4c0-0x4cf has been reserved

audit: initializing netlink socket (disabled)

audit(1108217764.641:0): initialized

highmem bounce pool size: 64 pages

Total HugeTLB memory allocated, 0

VFS: Disk quotas dquot_6.5.1

Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

Initializing Cryptographic API

ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11

PCI: setting IRQ 11 as level-triggered

ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11

radeonfb: Retreived PLL infos from BIOS

radeonfb: Reference=27.00 MHz (RefDiv=6) Memory=390.00 Mhz, System=210.00 MHz

radeonfb: PLL min 20000 max 40000

Non-DDC laptop panel detected

radeonfb: Monitor 1 type LCD found

radeonfb: Monitor 2 type no found

radeonfb: panel ID string: 1280x768 71MHz

radeonfb: detected LVDS panel size from BIOS: 1280x768

radeondb: BIOS provided dividers will be used

radeonfb: Power Management enabled for Mobility chipsets

radeonfb: ATI Radeon NP SDR SGRAM 64 MB

vesafb: probe of vesafb0 failed with error -6

ACPI: AC Adapter [AC] (on-line)

ACPI: Battery Slot [BAT0] (battery absent)

ACPI: Battery Slot [BAT1] (battery absent)

ACPI: Power Button (FF) [PWRF]

ACPI: Lid Switch [LID]

ACPI: Sleep Button (CM) [SLPB]

ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)

acpi_processor-2368 [11] acpi_processor_get_inf: Invalid PBLK length [7]

ACPI: Thermal Zone [THRM] (32 C)

isapnp: Scanning for PnP cards...

isapnp: No Plug & Play device found

Real Time Clock Driver v1.12

Linux agpgart interface v0.100 (c) Dave Jones

agpgart: Detected an Intel 855PM Chipset.

agpgart: Maximum main memory to use for agp memory: 941M

agpgart: AGP aperture is 256M @ 0xe0000000

i8042.c: Detected active multiplexing controller, rev 1.1.

serio: i8042 AUX0 port at 0x60,0x64 irq 12

serio: i8042 AUX1 port at 0x60,0x64 irq 12

serio: i8042 AUX2 port at 0x60,0x64 irq 12

serio: i8042 AUX3 port at 0x60,0x64 irq 12

serio: i8042 KBD port at 0x60,0x64 irq 1

Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing enabled

ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A

ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 7

PCI: setting IRQ 7 as level-triggered

ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 7 (level, low) -> IRQ 7

io scheduler noop registered

io scheduler anticipatory registered

io scheduler deadline registered

io scheduler cfq registered

RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize

divert: not allocating divert_blk for non-ethernet device lo

Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2

ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

ICH4: IDE controller at PCI slot 0000:00:1f.1

PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)

ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9

PCI: setting IRQ 9 as level-triggered

ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 9 (level, low) -> IRQ 9

ICH4: chipset revision 3

ICH4: not 100% native mode: will probe irqs later

ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio

ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio

Probing IDE interface ide0...

hda: FUJITSU MHU2100AT, ATA DISK drive

elevator: using anticipatory as default io scheduler

ide0 at 0x1f0-0x1f7,0x3f6 on irq 14

Probing IDE interface ide1...

hdc: MATSHITAUJ-831D, ATAPI CD/DVD-ROM drive

ide1 at 0x170-0x177,0x376 on irq 15

Probing IDE interface ide2...

ide2: Wait for ready failed before probe !

Probing IDE interface ide3...

ide3: Wait for ready failed before probe !

Probing IDE interface ide4...

ide4: Wait for ready failed before probe !

Probing IDE interface ide5...

ide5: Wait for ready failed before probe !

hda: max request size: 128KiB

hda: 195371568 sectors (100030 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)

hda: cache flushes supported

hda: hda1 hda2 < hda5 hda6 hda7 >

hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)

Uniform CD-ROM driver Revision: 3.20

ide-floppy driver 0.99.newide

usbcore: registered new driver hiddev

usbcore: registered new driver usbhid

drivers/usb/input/hid-core.c: v2.0:USB HID core driver

mice: PS/2 mouse device common for all mice

input: AT Translated Set 2 keyboard on isa0060/serio0

Synaptics Touchpad, model: 1

Firmware: 6.1

180 degree mounted touchpad

Sensor: 35

new absolute packet format

Touchpad has extended capability bits

-> multifinger detection

-> palm detection

input: SynPS/2 Synaptics TouchPad on isa0060/serio4

md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27

NET: Registered protocol family 2

IP: routing cache hash table of 8192 buckets, 64Kbytes

TCP: Hash tables configured (established 262144 bind 65536)

Initializing IPsec netlink socket

NET: Registered protocol family 1

NET: Registered protocol family 17

PM: Reading pmdisk image.

PM: Resume from disk failed.

ACPI wakeup devices:

SMBS MODM P0P2 USB1 USB2 USB3 EHCI

ACPI: (supports S0 S3 S4 S5)

Freeing unused kernel memory: 184k freed

kjournald starting. Commit interval 5 seconds

EXT3-fs: mounted filesystem with ordered data mode.

ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 9 (level, low) -> IRQ 9

ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 9 (level, low) -> IRQ 9

divert: allocating divert_blk for eth0

eth0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter

PrefPort:A RlmtMode:Check Link State

ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 7 (level, low) -> IRQ 7

PCI: Setting latency timer of device 0000:00:1f.5 to 64

intel8x0_measure_ac97_clock: measured 49497 usecs

intel8x0: clocking to 48000

ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 7 (level, low) -> IRQ 7

PCI: Setting latency timer of device 0000:00:1f.6 to 64

MC'97 1 converters and GPIO not ready (0xff00)

hw_random: RNG not detected

ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10

PCI: setting IRQ 10 as level-triggered

ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 10 (level, low) -> IRQ 10

ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller

PCI: Setting latency timer of device 0000:00:1d.7 to 64

ehci_hcd 0000:00:1d.7: irq 10, pci mem 0xffaffc00

ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1

PCI: cache line size of 32 is not supported by device 0000:00:1d.7

ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 6 ports detected

USB Universal Host Controller Interface driver v2.2

ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 11 (level, low) -> IRQ 11

uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1

PCI: Setting latency timer of device 0000:00:1d.0 to 64

uhci_hcd 0000:00:1d.0: irq 11, io base 0xe800

uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2

hub 2-0:1.0: USB hub found

hub 2-0:1.0: 2 ports detected

ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5

PCI: setting IRQ 5 as level-triggered

ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 5 (level, low) -> IRQ 5

uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2

PCI: Setting latency timer of device 0000:00:1d.1 to 64

uhci_hcd 0000:00:1d.1: irq 5, io base 0xe880

uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3

hub 3-0:1.0: USB hub found

hub 3-0:1.0: 2 ports detected

ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 9 (level, low) -> IRQ 9

uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3

PCI: Setting latency timer of device 0000:00:1d.2 to 64

uhci_hcd 0000:00:1d.2: irq 9, io base 0xec00

uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4

hub 4-0:1.0: USB hub found

hub 4-0:1.0: 2 ports detected

Linux Kernel Card Services

options: [pci] [cardbus] [pm]

ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 7 (level, low) -> IRQ 7

Yenta: CardBus bridge found at 0000:02:01.0 [1043:1987]

Yenta: ISA IRQ mask 0x0018, PCI irq 7

Socket status: 30000006

ieee1394: Initialized config rom entry `ip1394'

ohci1394: $Rev: 1223 $ Ben Collins

ACPI: PCI interrupt 0000:02:01.1[B] -> GSI 11 (level, low) -> IRQ 11

ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[ff9fb000-ff9fb7ff] Max Packet=[2048]

Asus Laptop ACPI Extras version 0.29

W3N model detected, unsupported, trying default values, supply the developers with your DSDT

EXT3 FS on hda6, internal journal

device-mapper: 4.3.0-ioctl (2004-09-30) initialised: dm-devel@...

cdrom: open failed.

ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e018000327ac89]

Adding 1004020k swap on /dev/hda5. Priority:-1 extents:1

--------------------------------------------------------------------------------------

---------------------- /var/log/messages --------------------------------

Feb 12 14:16:24 brick syslogd 1.4.1: restart.

Feb 12 14:16:24 brick syslog: syslogd startup succeeded

Feb 12 14:16:24 brick kernel: klogd 1.4.1, log source = /proc/kmsg started.

Feb 12 14:16:24 brick kernel: Linux version 2.6.10 (root@...) (gcc version 3.4.3) #3 Fri Feb 11 01:43:15 CET 2005

Feb 12 14:16:24 brick kernel: BIOS-provided physical RAM map:

Feb 12 14:16:24 brick kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)

Feb 12 14:16:24 brick kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)

Feb 12 14:16:24 brick kernel: BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)

Feb 12 14:16:24 brick kernel: BIOS-e820: 0000000000100000 - 000000003ff40000 (usable)

Feb 12 14:16:24 brick kernel: BIOS-e820: 000000003ff40000 - 000000003ff50000 (ACPI data)

Feb 12 14:16:24 brick kernel: BIOS-e820: 000000003ff50000 - 0000000040000000 (ACPI NVS)

Feb 12 14:16:24 brick kernel: 127MB HIGHMEM available.

Feb 12 14:16:24 brick kernel: 896MB LOWMEM available.

Feb 12 14:16:24 brick syslog: klogd startup succeeded

Feb 12 14:16:24 brick netfs: Mounting other filesystems: succeeded

Feb 12 14:16:24 brick kernel: DMI 2.3 present.

Feb 12 14:16:24 brick kernel: ACPI: PM-Timer IO Port: 0x408

Feb 12 14:16:24 brick kernel: Built 1 zonelists

Feb 12 14:16:24 brick kernel: Kernel command line: ro root=/dev/hda6

Feb 12 14:16:24 brick kernel: Found and enabled local APIC!

Feb 12 14:16:24 brick kernel: Initializing CPU#0

Feb 12 14:16:24 brick kernel: CPU 0 irqstacks, hard=c047a000 soft=c0479000

Feb 12 14:16:24 brick kernel: PID hash table entries: 4096 (order: 12, 65536 bytes)

Feb 12 14:16:24 brick kernel: Detected 2000.186 MHz processor.

Feb 12 14:16:24 brick kernel: Using pmtmr for high-res timesource

Feb 12 14:16:24 brick kernel: Console: colour VGA+ 80x25

Feb 12 14:16:24 brick kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

Feb 12 14:16:24 brick kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

Feb 12 14:16:24 brick acpid: acpid startup succeeded

Feb 12 14:16:24 brick kernel: Memory: 1033984k/1047808k available (2443k kernel code, 13152k reserved, 904k data, 184k

init, 130304k highmem)

Feb 12 14:16:24 brick kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.

Feb 12 14:16:24 brick kernel: Security Framework v1.0.0 initialized

Feb 12 14:16:24 brick kernel: Capability LSM initialized

Feb 12 14:16:24 brick kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes)

Feb 12 14:16:25 brick sshd: succeeded

Feb 12 14:16:25 brick kernel: CPU: L1 I cache: 32K, L1 D cache: 32K

Feb 12 14:16:25 brick kernel: CPU: L2 cache: 2048K

Feb 12 14:16:25 brick kernel: Intel machine check architecture supported.

Feb 12 14:16:25 brick kernel: Intel machine check reporting enabled on CPU#0.

Feb 12 14:16:25 brick gpm[3274]: *** info [startup.c(95)]:

Feb 12 14:16:25 brick kernel: CPU: Intel(R) Pentium(R) M processor 2.00GHz stepping 06

Feb 12 14:16:25 brick gpm[3274]: Started gpm successfully. Entered daemon mode.

Feb 12 14:16:25 brick kernel: Enabling fast FPU save and restore... done.

Feb 12 14:16:25 brick kernel: Enabling unmasked SIMD FPU exception support... done.

Feb 12 14:16:25 brick kernel: Checking 'hlt' instruction... OK.

Feb 12 14:16:25 brick kernel: tbxface-0118 [02] acpi_load_tables : ACPI Tables successfully acquired

Feb 12 14:16:25 brick kernel: Parsing all Control

Methods:..................................................................................................................................................................................................................................................................

Feb 12 14:16:25 brick kernel: Table [DSDT](id F004) - 953 Objects with 56 Devices 258 Methods 28 Regions

Feb 12 14:16:25 brick kernel: ACPI Namespace successfully loaded at root c0494600

Feb 12 14:16:25 brick kernel: ACPI: setting ELCR to 0200 (from 0ea0)

Feb 12 14:16:25 brick kernel: evxfevnt-0094 [03] acpi_enable : Transition to ACPI mode successful

Feb 12 14:16:25 brick kernel: checking if image is initramfs... it is

Feb 12 14:16:25 brick kernel: Freeing initrd memory: 296k freed

Feb 12 14:16:25 brick kernel: NET: Registered protocol family 16

Feb 12 14:16:25 brick kernel: PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2

Feb 12 14:16:25 brick kernel: PCI: Using configuration type 1

Feb 12 14:16:25 brick kernel: mtrr: v2.0 (20020519)

Feb 12 14:16:25 brick gpm[3274]: *** info [mice.c(1766)]:

Feb 12 14:16:25 brick kernel: ACPI: Subsystem revision 20041105

Feb 12 14:16:25 brick gpm[3274]: imps2: Auto-detected intellimouse PS/2

Feb 12 14:16:25 brick kernel: evgpeblk-0979 [06] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9

Feb 12 14:16:25 brick kernel: evgpeblk-0987 [06] ev_create_gpe_block : Found 7 Wake, Enabled 8 Runtime GPEs in this block

Feb 12 14:16:25 brick kernel: Completing Region/Field/Buffer/Package

initialization:..................................................................................................................................

Feb 12 14:16:25 brick kernel: Initialized 27/28 Regions 34/35 Fields 44/44 Buffers 25/25 Packages (962 nodes)

Feb 12 14:16:25 brick kernel: Executing all Device _STA and_INI

methods:.............................................evregion-0309 [20] ev_address_space_dispa: No handler for Region

[ECOR] (f7f821a8) [EmbeddedControl]

Feb 12 14:16:25 brick kernel: exfldio-0265: *** Error: Region EmbeddedControl(3) has no handler

Feb 12 14:16:25 brick kernel: psparse-1138: *** Error: Method execution failed [\_SB_.PCI0.SBRG.EC0_.ACS_] (Node

f7f864a8), AE_NOT_EXIST

Feb 12 14:16:25 brick kernel: psparse-1138: *** Error: Method execution failed [\_SB_.AC__._INI] (Node f7f889e8),

AE_NOT_EXIST

Feb 12 14:16:25 brick kernel: nsinit-0414 [06] ns_init_one_device : \_SB_.AC__._INI._INI failed: AE_NOT_EXIST

Feb 12 14:16:25 brick kernel: ..evregion-0309 [22] ev_address_space_dispa: No handler for Region [ECOR] (f7f821a8)

[EmbeddedControl]

Feb 12 14:16:25 brick kernel: exfldio-0265: *** Error: Region EmbeddedControl(3) has no handler

Feb 12 14:16:25 brick kernel: psparse-1138: *** Error: Method execution failed [\_SB_.PCI0.SBRG.EC0_.BATS] (Node

f7f86468), AE_NOT_EXIST

Feb 12 14:16:25 brick kernel: psparse-1138: *** Error: Method execution failed [\_SB_.BAT0._STA] (Node f7f8b2e8),

AE_NOT_EXIST

Feb 12 14:16:25 brick kernel: uteval-0158: *** Error: Method execution failed [\_SB_.BAT0._STA] (Node f7f8b2e8),

AE_NOT_EXIST

Feb 12 14:16:25 brick kernel: .............

Feb 12 14:16:25 brick kernel: 60 Devices found containing: 59 _STA, 3 _INI methods

Feb 12 14:16:25 brick kernel: ACPI: Interpreter enabled

Feb 12 14:16:25 brick kernel: ACPI: Using PIC for interrupt routing

Feb 12 14:16:25 brick kernel: ACPI: PCI Root Bridge [PCI0] (00:00)

Feb 12 14:16:25 brick kernel: PCI: Probing PCI hardware (bus 00)

Feb 12 14:16:25 brick kernel: PCI: Enabled i801 SMBus device

Feb 12 14:16:25 brick kernel: PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1

Feb 12 14:16:25 brick kernel: PCI: Transparent bridge - 0000:00:1e.0

Feb 12 14:16:25 brick kernel: ACPI: Embedded Controller [EC0] (gpe 28)

Feb 12 14:16:25 brick kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)

Feb 12 14:16:25 brick kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 11 12)

Feb 12 14:16:25 brick kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)

Feb 12 14:16:25 brick kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs *5 6 10)

Feb 12 14:16:25 brick kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 6 11) *0, disabled.

Feb 12 14:16:25 brick kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 7) *0, disabled.

Feb 12 14:16:25 brick kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7) *0, disabled.

Feb 12 14:16:25 brick kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 4 6 *10 12)

Feb 12 14:16:25 brick kernel: Linux Plug and Play Support v0.97 (c) Adam Belay

Feb 12 14:16:25 brick kernel: pnp: PnP ACPI init

Feb 12 14:16:25 brick gpm: gpm startup succeeded

Feb 12 14:16:25 brick kernel: pnp: PnP ACPI: found 14 devices

Feb 12 14:16:25 brick kernel: usbcore: registered new driver usbfs

Feb 12 14:16:25 brick kernel: usbcore: registered new driver hub

Feb 12 14:16:25 brick kernel: PCI: Using ACPI for IRQ routing

Feb 12 14:16:25 brick crond: crond startup succeeded

Feb 12 14:16:25 brick kernel: ** PCI interrupts are no longer routed automatically. If this

Feb 12 14:16:25 brick kernel: ** causes a device to stop working, it is probably because the

Feb 12 14:16:26 brick kernel: ** driver failed to call pci_enable_device(). As a temporary

Feb 12 14:16:27 brick xfs: xfs startup succeeded

Feb 12 14:16:27 brick kernel: ** workaround, the "pci=routeirq" argument restores the old

Feb 12 14:16:27 brick atd: atd startup succeeded

Feb 12 14:16:27 brick xfs[3326]: ignoring font path element /usr/X11R6/lib/X11/fonts/Speedo (unreadable)

Feb 12 14:16:27 brick kernel: ** behavior. If this argument makes the device work again,

Feb 12 14:16:27 brick hal.hotplug[3676]: DEVPATH is not set

Feb 12 14:16:28 brick kernel: ** please email the output of "lspci" to bjorn.helgaas@...

Feb 12 14:16:28 brick kernel: ** so I can fix the driver.

Feb 12 14:16:28 brick kernel: pnp: 00:07: ioport range 0xa00-0xa0f has been reserved

Feb 12 14:16:28 brick kernel: pnp: 00:0b: ioport range 0x540-0x55f has been reserved

Feb 12 14:16:28 brick kernel: pnp: 00:0b: ioport range 0x400-0x47f could not be reserved

Feb 12 14:16:28 brick kernel: pnp: 00:0b: ioport range 0x500-0x53f has been reserved

Feb 12 14:16:28 brick kernel: pnp: 00:0b: ioport range 0x4c0-0x4cf has been reserved

Feb 12 14:16:30 brick kernel: audit: initializing netlink socket (disabled)

Feb 12 14:16:30 brick kernel: audit(1108217764.641:0): initialized

Feb 12 14:16:30 brick kernel: highmem bounce pool size: 64 pages

Feb 12 14:16:30 brick kernel: Total HugeTLB memory allocated, 0

Feb 12 14:16:30 brick kernel: VFS: Disk quotas dquot_6.5.1

Feb 12 14:16:30 brick kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

Feb 12 14:16:30 brick kernel: Initializing Cryptographic API

Feb 12 14:16:31 brick kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11

Feb 12 14:16:31 brick kernel: PCI: setting IRQ 11 as level-triggered

Feb 12 14:16:31 brick kernel: ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11

Feb 12 14:16:31 brick kernel: radeonfb: Retreived PLL infos from BIOS

Feb 12 14:16:31 brick kernel: radeonfb: Reference=27.00 MHz (RefDiv=6) Memory=390.00 Mhz, System=210.00 MHz

Feb 12 14:16:31 brick kernel: radeonfb: PLL min 20000 max 40000

Feb 12 14:16:31 brick kernel: Non-DDC laptop panel detected

Feb 12 14:16:31 brick kernel: radeonfb: Monitor 1 type LCD found

Feb 12 14:16:31 brick kernel: radeonfb: Monitor 2 type no found

Feb 12 14:16:31 brick kernel: radeonfb: panel ID string: 1280x768 71MHz

Feb 12 14:16:31 brick kernel: radeonfb: detected LVDS panel size from BIOS: 1280x768

Feb 12 14:16:31 brick kernel: radeondb: BIOS provided dividers will be used

Feb 12 14:16:31 brick kernel: radeonfb: Power Management enabled for Mobility chipsets

Feb 12 14:16:31 brick kernel: radeonfb: ATI Radeon NP SDR SGRAM 64 MB

Feb 12 14:16:31 brick kernel: vesafb: probe of vesafb0 failed with error -6

Feb 12 14:16:31 brick kernel: ACPI: AC Adapter [AC] (on-line)

Feb 12 14:16:31 brick kernel: ACPI: Battery Slot [BAT0] (battery absent)

Feb 12 14:16:31 brick kernel: ACPI: Battery Slot [BAT1] (battery absent)

Feb 12 14:16:31 brick kernel: ACPI: Power Button (FF) [PWRF]

Feb 12 14:16:31 brick kernel: ACPI: Lid Switch [LID]

Feb 12 14:16:31 brick kernel: ACPI: Sleep Button (CM) [SLPB]

Feb 12 14:16:31 brick kernel: ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)

Feb 12 14:16:31 brick kernel: acpi_processor-2368 [11] acpi_processor_get_inf: Invalid PBLK length [7]

Feb 12 14:16:31 brick kernel: ACPI: Thermal Zone [THRM] (32 C)

Feb 12 14:16:31 brick kernel: isapnp: Scanning for PnP cards...

Feb 12 14:16:31 brick kernel: isapnp: No Plug & Play device found

Feb 12 14:16:31 brick kernel: Real Time Clock Driver v1.12

Feb 12 14:16:31 brick kernel: Linux agpgart interface v0.100 (c) Dave Jones

Feb 12 14:16:31 brick kernel: agpgart: Detected an Intel 855PM Chipset.

Feb 12 14:16:31 brick kernel: agpgart: Maximum main memory to use for agp memory: 941M

Feb 12 14:16:31 brick kernel: agpgart: AGP aperture is 256M @ 0xe0000000

Feb 12 14:16:31 brick kernel: i8042.c: Detected active multiplexing controller, rev 1.1.

Feb 12 14:16:31 brick kernel: serio: i8042 AUX0 port at 0x60,0x64 irq 12

Feb 12 14:16:31 brick kernel: serio: i8042 AUX1 port at 0x60,0x64 irq 12

Feb 12 14:16:31 brick kernel: serio: i8042 AUX2 port at 0x60,0x64 irq 12

Feb 12 14:16:31 brick kernel: serio: i8042 AUX3 port at 0x60,0x64 irq 12

Feb 12 14:16:31 brick kernel: serio: i8042 KBD port at 0x60,0x64 irq 1

Feb 12 14:16:31 brick kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing enabled

Feb 12 14:16:31 brick kernel: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A

Feb 12 14:16:31 brick kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 7

Feb 12 14:16:31 brick kernel: PCI: setting IRQ 7 as level-triggered

Feb 12 14:16:31 brick kernel: ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 7 (level, low) -> IRQ 7

Feb 12 14:16:31 brick kernel: io scheduler noop registered

Feb 12 14:16:31 brick kernel: io scheduler anticipatory registered

Feb 12 14:16:31 brick kernel: io scheduler deadline registered

Feb 12 14:16:31 brick kernel: io scheduler cfq registered

Feb 12 14:16:31 brick kernel: RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize

Feb 12 14:16:31 brick kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2

Feb 12 14:16:31 brick kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

Feb 12 14:16:31 brick kernel: ICH4: IDE controller at PCI slot 0000:00:1f.1

Feb 12 14:16:31 brick kernel: PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)

Feb 12 14:16:31 brick kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9

Feb 12 14:16:31 brick kernel: PCI: setting IRQ 9 as level-triggered

Feb 12 14:16:31 brick kernel: ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 9 (level, low) -> IRQ 9

Feb 12 14:16:31 brick kernel: ICH4: chipset revision 3

Feb 12 14:16:31 brick kernel: ICH4: not 100% native mode: will probe irqs later

Feb 12 14:16:31 brick kernel: ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio

Feb 12 14:16:32 brick kernel: ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio

Feb 12 14:16:32 brick kernel: hda: FUJITSU MHU2100AT, ATA DISK drive

Feb 12 14:16:32 brick kernel: elevator: using anticipatory as default io scheduler

Feb 12 14:16:32 brick kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14

Feb 12 14:16:32 brick kernel: hdc: MATSHITAUJ-831D, ATAPI CD/DVD-ROM drive

Feb 12 14:16:32 brick kernel: ide1 at 0x170-0x177,0x376 on irq 15

Feb 12 14:16:32 brick kernel: hda: max request size: 128KiB

Feb 12 14:16:32 brick kernel: hda: 195371568 sectors (100030 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)

Feb 12 14:16:32 brick kernel: hda: hda1 hda2 < hda5 hda6 hda7 >

Feb 12 14:16:32 brick kernel: hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)

Feb 12 14:16:32 brick kernel: Uniform CD-ROM driver Revision: 3.20

Feb 12 14:16:32 brick kernel: ide-floppy driver 0.99.newide

Feb 12 14:16:32 brick kernel: usbcore: registered new driver hiddev

Feb 12 14:16:32 brick kernel: usbcore: registered new driver usbhid

Feb 12 14:16:32 brick kernel: drivers/usb/input/hid-core.c: v2.0:USB HID core driver

Feb 12 14:16:32 brick kernel: mice: PS/2 mouse device common for all mice

Feb 12 14:16:32 brick kernel: input: AT Translated Set 2 keyboard on isa0060/serio0

Feb 12 14:16:32 brick kernel: Synaptics Touchpad, model: 1

Feb 12 14:16:32 brick kernel: Firmware: 6.1

Feb 12 14:16:32 brick kernel: 180 degree mounted touchpad

Feb 12 14:16:32 brick kernel: Sensor: 35

Feb 12 14:16:32 brick kernel: new absolute packet format

Feb 12 14:16:32 brick kernel: Touchpad has extended capability bits

Feb 12 14:16:32 brick kernel: -> multifinger detection

Feb 12 14:16:32 brick kernel: -> palm detection

Feb 12 14:16:32 brick kernel: input: SynPS/2 Synaptics TouchPad on isa0060/serio4

Feb 12 14:16:32 brick kernel: md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27

Feb 12 14:16:32 brick kernel: NET: Registered protocol family 2

Feb 12 14:16:32 brick kernel: IP: routing cache hash table of 8192 buckets, 64Kbytes

Feb 12 14:16:32 brick kernel: TCP: Hash tables configured (established 262144 bind 65536)

Feb 12 14:16:32 brick kernel: Initializing IPsec netlink socket

Feb 12 14:16:32 brick kernel: NET: Registered protocol family 1

Feb 12 14:16:32 brick kernel: NET: Registered protocol family 17

Feb 12 14:16:32 brick kernel: ACPI wakeup devices:

Feb 12 14:16:32 brick kernel: SMBS MODM P0P2 USB1 USB2 USB3 EHCI

Feb 12 14:16:32 brick kernel: ACPI: (supports S0 S3 S4 S5)

Feb 12 14:16:32 brick kernel: Freeing unused kernel memory: 184k freed

Feb 12 14:16:32 brick kernel: kjournald starting. Commit interval 5 seconds

Feb 12 14:16:32 brick kernel: EXT3-fs: mounted filesystem with ordered data mode.

Feb 12 14:16:32 brick kernel: ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 9 (level, low) -> IRQ 9

Feb 12 14:16:32 brick kernel: ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 9 (level, low) -> IRQ 9

Feb 12 14:16:32 brick kernel: eth0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter

Feb 12 14:16:32 brick kernel: PrefPort:A RlmtMode:Check Link State

Feb 12 14:16:32 brick kernel: ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 7 (level, low) -> IRQ 7

Feb 12 14:16:32 brick kernel: intel8x0_measure_ac97_clock: measured 49497 usecs

Feb 12 14:16:32 brick kernel: intel8x0: clocking to 48000

Feb 12 14:16:32 brick kernel: ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 7 (level, low) -> IRQ 7

Feb 12 14:16:32 brick kernel: MC'97 1 converters and GPIO not ready (0xff00)

Feb 12 14:16:32 brick kernel: hw_random: RNG not detected

Feb 12 14:16:32 brick kernel: ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10

Feb 12 14:16:32 brick kernel: PCI: setting IRQ 10 as level-triggered

Feb 12 14:16:32 brick kernel: ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 10 (level, low) -> IRQ 10

Feb 12 14:16:32 brick kernel: ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller

Feb 12 14:16:32 brick kernel: ehci_hcd 0000:00:1d.7: irq 10, pci mem 0xffaffc00

Feb 12 14:16:32 brick kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1

Feb 12 14:16:32 brick kernel: ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004

Feb 12 14:16:32 brick kernel: hub 1-0:1.0: USB hub found

Feb 12 14:16:32 brick kernel: hub 1-0:1.0: 6 ports detected

Feb 12 14:16:32 brick kernel: USB Universal Host Controller Interface driver v2.2

Feb 12 14:16:32 brick kernel: ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 11 (level, low) -> IRQ 11

Feb 12 14:16:32 brick kernel: uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1

Feb 12 14:16:32 brick kernel: uhci_hcd 0000:00:1d.0: irq 11, io base 0xe800

Feb 12 14:16:32 brick kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2

Feb 12 14:16:32 brick kernel: hub 2-0:1.0: USB hub found

Feb 12 14:16:32 brick kernel: hub 2-0:1.0: 2 ports detected

Feb 12 14:16:32 brick kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5

Feb 12 14:16:32 brick kernel: PCI: setting IRQ 5 as level-triggered

Feb 12 14:16:32 brick kernel: ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 5 (level, low) -> IRQ 5

Feb 12 14:16:32 brick kernel: uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2

Feb 12 14:16:32 brick kernel: uhci_hcd 0000:00:1d.1: irq 5, io base 0xe880

Feb 12 14:16:32 brick kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3

Feb 12 14:16:32 brick kernel: hub 3-0:1.0: USB hub found

Feb 12 14:16:32 brick kernel: hub 3-0:1.0: 2 ports detected

Feb 12 14:16:32 brick kernel: ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 9 (level, low) -> IRQ 9

Feb 12 14:16:32 brick kernel: uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3

Feb 12 14:16:32 brick kernel: uhci_hcd 0000:00:1d.2: irq 9, io base 0xec00

Feb 12 14:16:32 brick kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4

Feb 12 14:16:32 brick kernel: hub 4-0:1.0: USB hub found

Feb 12 14:16:32 brick kernel: hub 4-0:1.0: 2 ports detected

Feb 12 14:16:32 brick kernel: Linux Kernel Card Services

Feb 12 14:16:32 brick kernel: options: [pci] [cardbus] [pm]

Feb 12 14:16:32 brick kernel: ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 7 (level, low) -> IRQ 7

Feb 12 14:16:32 brick kernel: Yenta: CardBus bridge found at 0000:02:01.0 [1043:1987]

Feb 12 14:16:32 brick kernel: Yenta: ISA IRQ mask 0x0018, PCI irq 7

Feb 12 14:16:32 brick kernel: Socket status: 30000006

Feb 12 14:16:32 brick kernel: ohci1394: $Rev: 1223 $ Ben Collins

Feb 12 14:16:32 brick kernel: ACPI: PCI interrupt 0000:02:01.1[B] -> GSI 11 (level, low) -> IRQ 11

Feb 12 14:16:32 brick kernel: ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[ff9fb000-ff9fb7ff] Max Packet=[2048]

Feb 12 14:16:32 brick kernel: Asus Laptop ACPI Extras version 0.29

Feb 12 14:16:32 brick kernel: W3N model detected, unsupported, trying default values, supply the developers with your DSDT

Feb 12 14:16:32 brick kernel: EXT3 FS on hda6, internal journal

Feb 12 14:16:32 brick kernel: device-mapper: 4.3.0-ioctl (2004-09-30) initialised: dm-devel@...

Feb 12 14:16:32 brick kernel: cdrom: open failed.

Feb 12 14:16:32 brick kernel: Adding 1004020k swap on /dev/hda5. Priority:-1 extents:1

Feb 12 14:16:32 brick kernel: ip_tables: (C) 2000-2002 Netfilter core team

Feb 12 14:16:32 brick kernel: ip_conntrack version 2.1 (8186 buckets, 65488 max) - 336 bytes per conntrack

Feb 12 14:16:32 brick kernel: eth0: network connection up using port A

Feb 12 14:16:32 brick kernel: speed: 1000

Feb 12 14:16:32 brick kernel: autonegotiation: yes

Feb 12 14:16:32 brick kernel: duplex mode: full

Feb 12 14:16:32 brick kernel: flowctrl: symmetric

Feb 12 14:16:32 brick kernel: role: slave

Feb 12 14:16:32 brick kernel: irq moderation: static (2000 ints/sec)

Feb 12 14:16:32 brick kernel: scatter-gather: enabled

Feb 12 14:16:32 brick kernel: NET: Registered protocol family 10

Feb 12 14:16:32 brick kernel: Disabled Privacy Extensions on device c040cf00(lo)

Feb 12 14:16:32 brick kernel: IPv6 over IPv4 tunneling driver

Feb 12 14:16:32 brick kernel: hda: dma_intr: status=0x58 { DriveReady SeekComplete DataRequest }

Feb 12 14:16:32 brick kernel:

Feb 12 14:16:32 brick kernel: ide: failed opcode was: unknown

Feb 12 14:16:32 brick kernel: hda: status timeout: status=0xd0 { Busy }

Feb 12 14:16:32 brick kernel:

Feb 12 14:16:32 brick kernel: ide: failed opcode was: unknown

Feb 12 14:16:32 brick kernel: hda: DMA disabled

Feb 12 14:16:32 brick kernel: hda: drive not ready for command

Feb 12 14:16:32 brick kernel: hda: set_drive_speed_status: status=0x58 { DriveReady SeekComplete DataRequest }

Feb 12 14:16:32 brick kernel: ide: failed opcode was 100

Feb 12 14:16:32 brick kernel: ide0: reset: success

Feb 12 14:16:32 brick kernel: input: PC Speaker

Feb 12 14:16:32 brick kernel: fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY'

taints kernel.

Feb 12 14:16:32 brick kernel: [fglrx] Maximum main memory to use for locked dma buffers: 928 MBytes.

Feb 12 14:16:32 brick kernel: ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11

Feb 12 14:16:32 brick kernel: [fglrx] module loaded - fglrx 8.8.25 [Jan 14 2005] on minor 0

Feb 12 14:16:32 brick kernel: Fire GL built-in AGP-support

Feb 12 14:16:32 brick kernel: Based on agpgart interface v0.99 (c) Jeff Hartmann

Feb 12 14:16:32 brick kernel: agpgart: Maximum main memory to use for agp memory: 816M

Feb 12 14:16:32 brick kernel: agpgart: Detected an Intel 855PM Chipset, no integrated grapics found.

Feb 12 14:16:32 brick kernel: agpgart: Detected Intel i855PM chipset

Feb 12 14:16:32 brick kernel: agpgart: AGP aperture is 256M @ 0xe0000000

Feb 12 14:16:32 brick kernel: Power management callback for AGP chipset installed

Feb 12 14:16:32 brick kernel: [fglrx] AGP detected, AgpState = 0x1f000217 (hardware caps of chipset)

Feb 12 14:16:32 brick kernel: AGP: Found 2 AGPv2 devices

Feb 12 14:16:32 brick kernel: AGP: Doing enable for AGPv2

Feb 12 14:16:32 brick kernel: [fglrx] AGP enabled, AgpCommand = 0x1f000314 (selected caps)

Feb 12 14:16:32 brick kernel: [fglrx] free AGP = 256126976

Feb 12 14:16:32 brick kernel: [fglrx] max AGP = 256126976

Feb 12 14:16:32 brick kernel: [fglrx] free LFB = 53211136

Feb 12 14:16:32 brick kernel: [fglrx] max LFB = 53211136

Feb 12 14:16:32 brick kernel: [fglrx] free Inv = 0

Feb 12 14:16:32 brick kernel: [fglrx] max Inv = 0

Feb 12 14:16:32 brick kernel: [fglrx] total Inv = 0

Feb 12 14:16:33 brick kernel: [fglrx] total TIM = 0

Feb 12 14:16:34 brick kernel: [fglrx] total FB = 0

Feb 12 14:16:34 brick kernel: [fglrx] total AGP = 65536

-----------------------------------------------------------------------------------

--------- output of "find /proc/acpi -type f" ----------------------------

/proc/acpi/asus/disp

/proc/acpi/asus/brn

/proc/acpi/asus/lcd

/proc/acpi/asus/mled

/proc/acpi/asus/wled

/proc/acpi/asus/info

/proc/acpi/wakeup

/proc/acpi/alarm

/proc/acpi/sleep

/proc/acpi/thermal_zone/THRM/polling_frequency

/proc/acpi/thermal_zone/THRM/cooling_mode

/proc/acpi/thermal_zone/THRM/trip_points

/proc/acpi/thermal_zone/THRM/temperature

/proc/acpi/thermal_zone/THRM/state

/proc/acpi/processor/CPU1/performance

/proc/acpi/processor/CPU1/limit

/proc/acpi/processor/CPU1/throttling

/proc/acpi/processor/CPU1/power

/proc/acpi/processor/CPU1/info

/proc/acpi/video/VGA/LCD/EDID

/proc/acpi/video/VGA/LCD/brightness

/proc/acpi/video/VGA/LCD/state

/proc/acpi/video/VGA/LCD/info

/proc/acpi/video/VGA/TV/EDID

/proc/acpi/video/VGA/TV/brightness

/proc/acpi/video/VGA/TV/state

/proc/acpi/video/VGA/TV/info

/proc/acpi/video/VGA/CRT/EDID

/proc/acpi/video/VGA/CRT/brightness

/proc/acpi/video/VGA/CRT/state

/proc/acpi/video/VGA/CRT/info

/proc/acpi/video/VGA/DOS

/proc/acpi/video/VGA/POST

/proc/acpi/video/VGA/POST_info

/proc/acpi/video/VGA/ROM

/proc/acpi/video/VGA/info

/proc/acpi/button/sleep/SLPB/info

/proc/acpi/button/lid/LID/state

/proc/acpi/button/lid/LID/info

/proc/acpi/button/power/PWRF/info

/proc/acpi/battery/BAT1/alarm

/proc/acpi/battery/BAT1/state

/proc/acpi/battery/BAT1/info

/proc/acpi/battery/BAT0/alarm

/proc/acpi/battery/BAT0/state

/proc/acpi/battery/BAT0/info

/proc/acpi/ac_adapter/AC/state

/proc/acpi/debug_level

/proc/acpi/debug_layer

/proc/acpi/event

/proc/acpi/fadt

/proc/acpi/dsdt

/proc/acpi/info

/proc/acpi/embedded_controller/EC0/info

-----------------------------------------------------------------------------------

------- output of lspci -vv ------------------------------------------------------

00:00.0 Host bridge: Intel Corp. 82855PM Processor to I/O Controller (rev 21)

Subsystem: ASUSTeK Computer Inc.: Unknown device 186a

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-

Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR-

Latency: 0

Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]

Capabilities: [e4] Vendor Specific Information

Capabilities: [a0] AGP version 2.0

Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4

Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW+ Rate=x4

00:01.0 PCI bridge: Intel Corp. 82855PM Processor to AGP Controller (rev 21) (prog-if 00 [Normal decode])

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-

Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR-

Latency: 64

Bus: primary=00, secondary=01, subordinate=01, sec-latency=64

I/O behind bridge: 0000c000-0000cfff

Memory behind bridge: ff800000-ff8fffff

Prefetchable memory behind bridge: ce900000-de9fffff

Secondary status: 66Mhz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-

BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-

00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])

Subsystem: ASUSTeK Computer Inc.: Unknown device 1869

Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-

Latency: 0

Interrupt: pin A routed to IRQ 11

Region 4: I/O ports at e800 [size=32]

00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI])

Subsystem: ASUSTeK Computer Inc.: Unknown device 1869

Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-

Latency: 0

Interrupt: pin B routed to IRQ 5

Region 4: I/O ports at e880 [size=32]

00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI])

Subsystem: ASUSTeK Computer Inc.: Unknown device 1869

Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-

Latency: 0

Interrupt: pin C routed to IRQ 9

Region 4: I/O ports at ec00 [size=32]

00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI])

Subsystem: ASUSTeK Computer Inc.: Unknown device 1868

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-

Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-

Latency: 0

Interrupt: pin D routed to IRQ 10

Region 0: Memory at ffaffc00 (32-bit, non-prefetchable) [size=1K]

Capabilities: [50] Power Management version 2

Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Capabilities: [58] Debug port

00:1e.0 PCI bridge: Intel Corp. 82801 Mobile PCI Bridge (rev 83) (prog-if 00 [Normal decode])

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-

Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR-

Latency: 0

Bus: primary=00, secondary=02, subordinate=02, sec-latency=64

I/O behind bridge: 0000d000-0000dfff

Memory behind bridge: ff900000-ff9fffff

Prefetchable memory behind bridge: dea00000-deafffff

Secondary status: 66Mhz- FastB2B+ ParErr- DEVSEL=medium >TAbort-

BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-

00:1f.0 ISA bridge: Intel Corp. 82801DBM (ICH4-M) LPC Interface Bridge (rev 03)

Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-

Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-

Latency: 0

00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4-M) IDE Controller (rev 03) (prog-if 8a [Master SecP PriP])

Subsystem: ASUSTeK Computer Inc.: Unknown device 1869

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-

Latency: 0

Interrupt: pin A routed to IRQ 9

Region 0: I/O ports at

Region 1: I/O ports at

Region 2: I/O ports at

Region 3: I/O ports at

Region 4: I/O ports at ffa0 [size=16]

Region 5: Memory at 40000000 (32-bit, non-prefetchable) [size=1K]

00:1f.3 SMBus: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03)

Subsystem: ASUSTeK Computer Inc.: Unknown device 1869

Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-

Interrupt: pin B routed to IRQ 0

Region 4: I/O ports at 0540 [size=32]

00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)

Subsystem: ASUSTeK Computer Inc.: Unknown device 1893

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-

Latency: 0

Interrupt: pin B routed to IRQ 7

Region 0: I/O ports at ee00 [size=256]

Region 1: I/O ports at e000 [size=64]

Region 2: Memory at ffaff800 (32-bit, non-prefetchable) [size=512]

Region 3: Memory at ffaff400 (32-bit, non-prefetchable) [size=256]

Capabilities: [50] Power Management version 2

Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1f.6 Modem: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03) (prog-if 00 [Generic])

Subsystem: ASUSTeK Computer Inc.: Unknown device 1826

Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-

Latency: 0

Interrupt: pin B routed to IRQ 7

Region 0: I/O ports at e400 [size=256]

Region 1: I/O ports at e080 [size=128]

Capabilities: [50] Power Management version 2

Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] (prog-if 00 [VGA])

Subsystem: ASUSTeK Computer Inc.: Unknown device 1772

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-

Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-

Latency: 255 (2000ns min), Cache Line Size 10

Interrupt: pin A routed to IRQ 11

Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]

Region 1: I/O ports at c800 [size=256]

Region 2: Memory at ff8f0000 (32-bit, non-prefetchable) [size=64K]

[virtual] Expansion ROM at ff8c0000 [disabled] [size=128K]

Capabilities: [58] AGP version 2.0

Status: RQ=80 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4

Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW+ Rate=x4

Capabilities: [50] Power Management version 2

Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)

Status: D0 PME-Enable- DSel=0 DScale=0 PME-

02:00.0 Ethernet controller: Marvell Technology Group Ltd. Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (rev 13)

Subsystem: ASUSTeK Computer Inc.: Unknown device 173c

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-

Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-

Latency: 64 (5750ns min, 7750ns max), Cache Line Size 10

Interrupt: pin A routed to IRQ 9

Region 0: Memory at ff9fc000 (32-bit, non-prefetchable) [size=16K]

Region 1: I/O ports at d800 [size=256]

Expansion ROM at ff9c0000 [disabled] [size=128K]

Capabilities: [48] Power Management version 2

Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)

Status: D0 PME-Enable- DSel=0 DScale=1 PME-

Capabilities: [50] Vital Product Data

02:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3)

Subsystem: ASUSTeK Computer Inc.: Unknown device 1987

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-

Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR-

Latency: 168

Interrupt: pin A routed to IRQ 7

Region 0: Memory at 40001000 (32-bit, non-prefetchable) [size=4K]

Bus: primary=02, secondary=03, subordinate=06, sec-latency=176

Memory window 0: 40400000-407ff000 (prefetchable)

Memory window 1: 40800000-40bff000

I/O window 0: 00004000-000040ff

I/O window 1: 00004400-000044ff

BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+

16-bit legacy interface ports at 0001

02:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 08) (prog-if 10 [OHCI])

Subsystem: ASUSTeK Computer Inc.: Unknown device 1987

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-

Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR-

Latency: 64 (500ns min, 1000ns max)

Interrupt: pin B routed to IRQ 11

Region 0: Memory at ff9fb000 (32-bit, non-prefetchable) [size=2K]

Capabilities: [dc] Power Management version 2

Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Status: D0 PME-Enable- DSel=0 DScale=2 PME+

02:01.2 Class 0805: Ricoh Co Ltd: Unknown device 0822 (rev 17)

Subsystem: ASUSTeK Computer Inc.: Unknown device 1987

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-

Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR-

Latency: 64

Interrupt: pin C routed to IRQ 9

Region 0: Memory at ff9fb800 (32-bit, non-prefetchable) [size=256]

Capabilities: [80] Power Management version 2

Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)

Status: D0 PME-Enable- DSel=0 DScale=2 PME-

02:01.3 System peripheral: Ricoh Co Ltd: Unknown device 0592 (rev 08)

Subsystem: ASUSTeK Computer Inc.: Unknown device 1987

Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-

Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR-

Interrupt: pin C routed to IRQ 9

Region 0: Memory at ff9fbc00 (32-bit, non-prefetchable) [size=256]

Capabilities: [80] Power Management version 2

Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)

Status: D0 PME-Enable- DSel=0 DScale=2 PME-

02:02.0 Network controller: Intel Corp. PRO/Wireless 2200BG (rev 05)

Subsystem: Intel Corp.: Unknown device 2701

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-

Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-

Latency: 64 (750ns min, 6000ns max), Cache Line Size 10

Interrupt: pin A routed to IRQ 9

Region 0: Memory at ff9fa000 (32-bit, non-prefetchable) [size=4K]

Capabilities: [dc] Power Management version 2

Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

Status: D0 PME-Enable- DSel=0 DScale=1 PME-

------------------------------------------------------------------------------------------------

---------- output of cat /proc/acpi/asus/info ----------------

Asus Laptop ACPI Extras Driver 0.29

Model reference : M2E

SFUN value : 0x0877

DSDT length : 25774

DSDT checksum : 142

DSDT revision : 1

OEM id : 1ABSP

OEM table id : 1ABSP001

OEM revision : 0x1

ASL comp vendor id : MSFT

ASL comp revision : 0x2000001

------------------------------------------------------------------------------------------------