Generate a Simulator Build command

最新推荐文章于 2024-11-15 18:03:27 发布
最新推荐文章于 2024-11-15 18:03:27 发布
阅读量72 收藏
点赞数
CC 4.0 BY-SA版权
原文链接：http://www.cnblogs.com/billy-chou/p/3999567.html

做fb分享时 如果用到了第三方的shareSDK时 我们需要提交app到fb开发者后台去审核，审核通过后就可以保证任何fb账号都可以登录分享成功而并非只有测试账号

在fb开发者后台 app下有个选项如图

  点击进入后我们需要在这里写很多资料 其中一个就是提交一个zip包给fb去审核

这时我们就需要 Generate a Simulator Build， 然后把它压缩成一个zip

如何Generate a Simulator Build？？？ 请看以下几个步驟：

打开工程后－－show in finder 找到xx.xcodeproj  右键 选择如图所示用终端机打开

然后依次输入如图红线标记所示的命令

 如果你是用子workspace ，请将最后一条命令改成如下命令：

xcodebuild -arch i386 -sdk iphonesimulator{version} -workspace [projectName].xcworkspace -scheme [projectName]

正如我用的命令是这样的

如果成功则会有如下字样提示：

最后需要压缩一个zip文件以上传到fb进行审核，这里需要提醒大家  fb审核你的app需要7个工作日，需要你计划好时间了！ 

 

 

转载于:https://www.cnblogs.com/billy-chou/p/3999567.html

Mac上Cargo编译错误： failed to run custom build command for '*.*'
weixin_33836874的博客
01-12 2570
编译Rust的项目时候出现了错误： error: failed to run custom build command for croaring-sys v0.3.7 process didn't exit successfully: /Users/.../grin/target/release/build/croaring-sys-20...
为iOS创建一个simulator build
linshaolie
04-04 1943
创建simulator build 并通过模拟器运行
error: failed to run custom build command for `openssl-sys `
welling_22的博客
01-18 6943
error: failed to run custom build command for `openssl-sys v0.9.60` 遇到这个问题需要安装最新的libssl包， 1,执行命令：sudo apt install libssl-dev 2,清除.lock 文件和 target文件夹 rm Cargo.lock & rm -rf target/ 3,再次执行 cargo run 结论：改问题是ssl库升级导致调，更新到最新到ssl库即可解决，祝好运 ...
error: failed to run custom build command for openssl-sys v0.9.104-Rust trpl crate出错
mztt的博客
11-15 1248
场景：项目安装trpl时，报错。
ego-planner catkin build 问题
qq_53014782的博客
05-28 344
第一个问题 找不到quadrotor_msgsConfig.cmake之类的问题，基本上是package.xml没有添加对应的依赖， catkin build不知道依赖关系，catkin_make可能根据CmakeLists.txt建立了依赖关系。pose_utils功能包会提供一个编译出来的库，另一个功能包需要这个库但是ego-planner里重复写了连接关系。
dxinl@dxinl-NUC13VYKi5:~/Fast-Drone-250$ catkin_make Base path: /home/dxinl/Fast-Drone-250 Source space: /home/dxinl/Fast-Drone-250/src Build space: /home/dxinl/Fast-Drone-250/build Devel space: /home/dxinl/Fast-Drone-250/devel Install space: /home/dxinl/Fast-Drone-250/install #### #### Running command: "make cmake_check_build_system" in "/home/dxinl/Fast-Drone-250/build" #### #### #### Running command: "make -j16 -l16" in "/home/dxinl/Fast-Drone-250/build" #### [ 0%] Built target geometry_msgs_generate_messages_nodejs [ 0%] Built target geometry_msgs_generate_messages_py [ 0%] Built target geometry_msgs_generate_messages_lisp [ 0%] Built target geometry_msgs_generate_messages_eus [ 0%] Built target geometry_msgs_generate_messages_cpp [ 4%] Built target camera_models make[2]: *** 没有规则可制作目标“/usr/lib/x86_64-linux-gnu/libvtkCommonCore-7.1.so.7.1p.1”，由“/home/dxinl/Fast-Drone-250/devel/lib/map_generator/random_forest” 需求。 停止。 [ 7%] Built target libGeographiccc [ 9%] Built target Calibrations make[1]: *** [CMakeFiles/Makefile2:3007：uav_simulator/map_generator/CMakeFiles/random_forest.dir/all] 错误 2 make[1]: *** 正在等待未完成的任务.... [ 10%] Built target plan_env [ 11%] Built target obj_generator [ 11%] Built target pose_utils [ 11%] Built target _decomp_ros_msgs_generate_messages_check_deps_Ellipsoid [ 11%] Built target nav_msgs_generate_messages_eus [ 11%] Built target _decomp_ros_msgs_generate_messages_check_deps_PolyhedronArray [ 11%] Built target _decomp_ros_msgs_generate_messages_check_deps_Polyhedron [ 11%] Built target _decomp_ros_msgs_generate_messages_check_deps_EllipsoidArray [ 11%] Built target _quadrotor_msgs_generate_messages_check_deps_AuxCommand [ 11%] Built target _quadrotor_msgs_generate_messages_check_deps_TRPYCommand [ 11%] Built target _quadrotor_msgs_generate_messages_check_deps_StatusData [ 11%] Built target _quadrotor_msgs_generate_messages_check_deps_Odometry make: *** [Makefile:141：all] 错误 2 Invoking "make -j16 -l16" failed dxinl@dxinl-NUC13VYKi5:~
03-13
cd VTK-7.1.1 && mkdir build && cd build cmake .. -DCMAKE_INSTALL_PREFIX=/usr/local make -j$(nproc) sudo make install ``` 3. **修复符号链接** - 若已安装VTK 7.1但库路径未正确链接： ```bash sudo...
The Network Simulator, Version 3 -------------------------------- Table of Contents: ------------------ 1) An overview 2) Building ns-3 3) Running ns-3 4) Getting access to the ns-3 documentation 5) Working with the development version of ns-3 Note: Much more substantial information about ns-3 can be found at http://www.nsnam.org 1) An Open Source project ------------------------- ns-3 is a free open source project aiming to build a discrete-event network simulator targeted for simulation research and education. This is a collaborative project; we hope that the missing pieces of the models we have not yet implemented will be contributed by the community in an open collaboration process. The process of contributing to the ns-3 project varies with the people involved, the amount of time they can invest and the type of model they want to work on, but the current process that the project tries to follow is described here: http://www.nsnam.org/developers/contributing-code/ This README excerpts some details from a more extensive tutorial that is maintained at: http://www.nsnam.org/documentation/latest/ 2) Building ns-3 ---------------- The code for the framework and the default models provided by ns-3 is built as a set of libraries. User simulations are expected to be written as simple programs that make use of these ns-3 libraries. To build the set of default libraries and the example programs included in this package, you need to use the tool 'waf'. Detailed information on how use waf is included in the file doc/build.txt However, the real quick and dirty way to get started is to type the command ./waf configure --enable-examples followed by ./waf in the the directory which contains this README file. The files built will be copied in the build/ directory. The current codebase is expected to build and run on the set of platforms listed in the RELEASE_NOTES file. Other platforms may or may not work: we welcome patches to improve the portability of the code to these other platforms. 3) Running ns-3 --------------- On recent Linux systems, once you have built ns-3 (with examples enabled), it should be easy to run the sample programs with the following command, such as: ./waf --run simple-global-routing That program should generate a simple-global-routing.tr text trace file and a set of simple-global-routing-xx-xx.pcap binary pcap trace files, which can be read by tcpdump -tt -r filename.pcap The program source can be found in the examples/routing directory. 4) Getting access to the ns-3 documentation ------------------------------------------- Once you have verified that your build of ns-3 works by running the simple-point-to-point example as outlined in 4) above, it is quite likely that you will want to get started on reading some ns-3 documentation. All of that documentation should always be available from the ns-3 website: http:://www.nsnam.org/documentation/. This documentation includes: - a tutorial - a reference manual - models in the ns-3 model library - a wiki for user-contributed tips: http://www.nsnam.org/wiki/ - API documentation generated using doxygen: this is a reference manual, most likely not very well suited as introductory text: http://www.nsnam.org/doxygen/index.html 5) Working with the development version of ns-3 ----------------------------------------------- If you want to download and use the development version of ns-3, you need to use the tool 'mercurial'. A quick and dirty cheat sheet is included in doc/mercurial.txt but reading through the mercurial tutorials included on the mercurial website is usually a good idea if you are not familiar with it. If you have successfully installed mercurial, you can get a copy of the development version with the following command: "hg clone http://code.nsnam.org/ns-3-dev"
03-08
例如，将“discrete-event network simulator”翻译为“离散事件网络模拟器”并适当解释其用途。 总结来说，回答需要结构清晰，分点说明，准确转述用户提供的材料，并适当补充解释，帮助用户全面了解NS-3的基本信息...
Xcode Build Setting 整理（一）
zhhelnice的博客
06-21 8986
文章目录基本概念最终取值`Build Settings``Architectures` 架构`Base SDK` (SDKROOT)`Additional SDKs` (ADDITIONAL_SDKS)`Supported Platforms` (SUPPORTED_PLATFORMS)`Architecures` (ARCHS)`Valid Architectures` (VALID_ARCHS)`Build Active Architecture Only` (ONLY_ACTIVE_ARCH)`Ass
saber@ubuntu:~/fastplanner_ws$ catkin_make Base path: /home/saber/fastplanner_ws Source space: /home/saber/fastplanner_ws/src Build space: /home/saber/fastplanner_ws/build Devel space: /home/saber/fastplanner_ws/devel Install space: /home/saber/fastplanner_ws/install #### #### Running command: "cmake /home/saber/fastplanner_ws/src -DCATKIN_DEVEL_PREFIX=/home/saber/fastplanner_ws/devel -DCMAKE_INSTALL_PREFIX=/home/saber/fastplanner_ws/install -G Unix Makefiles" in "/home/saber/fastplanner_ws/build" #### -- Using CATKIN_DEVEL_PREFIX: /home/saber/fastplanner_ws/devel -- Using CMAKE_PREFIX_PATH: /opt/ros/noetic -- This workspace overlays: /opt/ros/noetic -- Found PythonInterp: /usr/bin/python3 (found suitable version "3.8.10", minimum required is "3") -- Using PYTHON_EXECUTABLE: /usr/bin/python3 -- Using Debian Python package layout -- Using empy: /usr/lib/python3/dist-packages/em.py -- Using CATKIN_ENABLE_TESTING: ON -- Call enable_testing() -- Using CATKIN_TEST_RESULTS_DIR: /home/saber/fastplanner_ws/build/test_results -- Forcing gtest/gmock from source, though one was otherwise available. -- Found gtest sources under '/usr/src/googletest': gtests will be built -- Found gmock sources under '/usr/src/googletest': gmock will be built -- Found PythonInterp: /usr/bin/python3 (found version "3.8.10") -- Using Python nosetests: /usr/bin/nosetests3 -- catkin 0.8.12 -- BUILD_SHARED_LIBS is on -- BUILD_SHARED_LIBS is on -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -- ~~ traversing 20 packages in topological order: -- ~~ - quadrotor_msgs -- ~~ - cmake_utils -- ~~ - map_generator -- ~~ - plan_env -- ~~ - bspline -- ~~ - bspline_opt -- ~~ - path_searching -- ~~ - poly_traj -- ~~ - pose_utils -- ~~ - so3_disturbance_generator -- ~~ - odom_visualization -- ~~ - local_sensing_node -- ~~ - so3_control -- ~~ - multi_map_server -- ~~ - traj_utils -- ~~ - plan_manage -- ~~ - uav_utils -- ~~ - so3_quadrotor_simulator -- ~~ - rviz_plugins -- ~~ - waypoint_generator -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -- +++ processing catkin package: 'quadrotor_msgs' -- ==> add_subdirectory(Fast-Planner/uav_simulator/Utils/quadrotor_msgs) -- Using these message generators: gencpp;geneus;genlisp;gennodejs;genpy -- quadrotor_msgs: 13 messages, 0 services -- +++ processing catkin package: 'cmake_utils' -- ==> add_subdirectory(Fast-Planner/uav_simulator/Utils/cmake_utils) -- +++ processing catkin package: 'map_generator' -- ==> add_subdirectory(Fast-Planner/uav_simulator/map_generator) -- Eigen found (include: /usr/include/eigen3, version: 3.3.7) -- The imported target "vtkParseOGLExt" references the file "/usr/bin/vtkParseOGLExt-7.1" but this file does not exist. Possible reasons include: * The file was deleted, renamed, or moved to another location. * An install or uninstall procedure did not complete successfully. * The installation package was faulty and contained "/usr/lib/cmake/vtk-7.1/VTKTargets.cmake" but not all the files it references. -- The imported target "vtkRenderingPythonTkWidgets" references the file "/usr/lib/x86_64-linux-gnu/libvtkRenderingPythonTkWidgets.so" but this file does not exist. Possible reasons include: * The file was deleted, renamed, or moved to another location. * An install or uninstall procedure did not complete successfully. * The installation package was faulty and contained "/usr/lib/cmake/vtk-7.1/VTKTargets.cmake" but not all the files it references. -- The imported target "vtk" references the file "/usr/bin/vtk" but this file does not exist. Possible reasons include: * The file was deleted, renamed, or moved to another location. * An install or uninstall procedure did not complete successfully. * The installation package was faulty and contained "/usr/lib/cmake/vtk-7.1/VTKTargets.cmake" but not all the files it references. -- The imported target "pvtk" references the file "/usr/bin/pvtk" but this file does not exist. Possible reasons include: * The file was deleted, renamed, or moved to another location. * An install or uninstall procedure did not complete successfully. * The installation package was faulty and contained "/usr/lib/cmake/vtk-7.1/VTKTargets.cmake" but not all the files it references. -- OpenNI found (include: /usr/include/ni, lib: /usr/lib/libOpenNI.so) -- OpenNI2 found (include: /usr/include/openni2, lib: /usr/lib/libOpenNI2.so) ** WARNING ** io features related to pcap will be disabled ** WARNING ** io features related to png will be disabled ** WARNING ** io features related to libusb-1.0 will be disabled -- OpenNI found (include: /usr/include/ni, lib: /usr/lib/libOpenNI.so) -- OpenNI2 found (include: /usr/include/openni2, lib: /usr/lib/libOpenNI2.so) -- QHULL found (include: /usr/include, lib: optimized;/usr/lib/x86_64-linux-gnu/libqhull.so;debug;/usr/lib/x86_64-linux-gnu/libqhull.so) -- OpenNI found (include: /usr/include/ni, lib: /usr/lib/libOpenNI.so) -- looking for PCL_COMMON -- looking for PCL_KDTREE -- looking for PCL_OCTREE -- looking for PCL_SEARCH -- looking for PCL_SAMPLE_CONSENSUS -- looking for PCL_FILTERS -- looking for PCL_2D -- looking for PCL_GEOMETRY -- looking for PCL_IO -- looking for PCL_FEATURES -- looking for PCL_ML -- looking for PCL_SEGMENTATION -- looking for PCL_VISUALIZATION -- looking for PCL_SURFACE -- looking for PCL_REGISTRATION -- looking for PCL_KEYPOINTS -- looking for PCL_TRACKING -- looking for PCL_RECOGNITION -- looking for PCL_STEREO -- looking for PCL_APPS -- looking for PCL_IN_HAND_SCANNER -- looking for PCL_POINT_CLOUD_EDITOR -- looking for PCL_OUTOFCORE -- looking for PCL_PEOPLE -- +++ processing catkin package: 'plan_env' -- ==> add_subdirectory(Fast-Planner/fast_planner/plan_env) -- Eigen found (include: /usr/include/eigen3, version: 3.3.7) -- The imported target "vtkParseOGLExt" references the file "/usr/bin/vtkParseOGLExt-7.1" but this file does not exist. Possible reasons include: * The file was deleted, renamed, or moved to another location. * An install or uninstall procedure did not complete successfully. * The installation package was faulty and contained "/usr/lib/cmake/vtk-7.1/VTKTargets.cmake" but not all the files it references. -- The imported target "vtkRenderingPythonTkWidgets" references the file "/usr/lib/x86_64-linux-gnu/libvtkRenderingPythonTkWidgets.so" but this file does not exist. Possible reasons include: * The file was deleted, renamed, or moved to another location. * An install or uninstall procedure did not complete successfully. * The installation package was faulty and contained "/usr/lib/cmake/vtk-7.1/VTKTargets.cmake" but not all the files it references. -- The imported target "vtk" references the file "/usr/bin/vtk" but this file does not exist. Possible reasons include: * The file was deleted, renamed, or moved to another location. * An install or uninstall procedure did not complete successfully. * The installation package was faulty and contained "/usr/lib/cmake/vtk-7.1/VTKTargets.cmake" but not all the files it references. -- The imported target "pvtk" references the file "/usr/bin/pvtk" but this file does not exist. Possible reasons include: * The file was deleted, renamed, or moved to another location. * An install or uninstall procedure did not complete successfully. * The installation package was faulty and contained "/usr/lib/cmake/vtk-7.1/VTKTargets.cmake" but not all the files it references. -- OpenNI found (include: /usr/include/ni, lib: /usr/lib/libOpenNI.so) -- OpenNI2 found (include: /usr/include/openni2, lib: /usr/lib/libOpenNI2.so) ** WARNING ** io features related to pcap will be disabled ** WARNING ** io features related to png will be disabled ** WARNING ** io features related to libusb-1.0 will be disabled -- OpenNI found (include: /usr/include/ni, lib: /usr/lib/libOpenNI.so) -- OpenNI2 found (include: /usr/include/openni2, lib: /usr/lib/libOpenNI2.so) -- QHULL found (include: /usr/include, lib: optimized;/usr/lib/x86_64-linux-gnu/libqhull.so;debug;/usr/lib/x86_64-linux-gnu/libqhull.so) -- OpenNI found (include: /usr/include/ni, lib: /usr/lib/libOpenNI.so) -- looking for PCL_COMMON -- looking for PCL_KDTREE -- looking for PCL_OCTREE -- looking for PCL_SEARCH -- looking for PCL_SAMPLE_CONSENSUS -- looking for PCL_FILTERS -- looking for PCL_2D -- looking for PCL_GEOMETRY -- looking for PCL_IO -- looking for PCL_FEATURES -- looking for PCL_ML -- looking for PCL_SEGMENTATION -- looking for PCL_VISUALIZATION -- looking for PCL_SURFACE -- looking for PCL_REGISTRATION -- looking for PCL_KEYPOINTS -- looking for PCL_TRACKING -- looking for PCL_RECOGNITION -- looking for PCL_STEREO -- looking for PCL_APPS -- looking for PCL_IN_HAND_SCANNER -- looking for PCL_POINT_CLOUD_EDITOR -- looking for PCL_OUTOFCORE -- looking for PCL_PEOPLE -- Found PCL: pcl_common;pcl_kdtree;pcl_octree;pcl_search;pcl_sample_consensus;pcl_filters;pcl_io;pcl_features;pcl_ml;pcl_segmentation;pcl_visualization;pcl_surface;pcl_registration;pcl_keypoints;pcl_tracking;pcl_recognition;pcl_stereo;pcl_apps;pcl_outofcore;pcl_people;/usr/lib/x86_64-linux-gnu/libboost_system.so;/usr/lib/x86_64-linux-gnu/libboost_filesystem.so;/usr/lib/x86_64-linux-gnu/libboost_date_time.so;/usr/lib/x86_64-linux-gnu/libboost_iostreams.so;/usr/lib/x86_64-linux-gnu/libboost_regex.so;optimized;/usr/lib/x86_64-linux-gnu/libqhull.so;debug;/usr/lib/x86_64-linux-gnu/libqhull.so;/usr/lib/libOpenNI.so;/usr/lib/libOpenNI2.so;vtkChartsCore;vtkCommonColor;vtkCommonCore;vtksys;vtkCommonDataModel;vtkCommonMath;vtkCommonMisc;vtkCommonSystem;vtkCommonTransforms;vtkCommonExecutionModel;vtkFiltersGeneral;vtkCommonComputationalGeometry;vtkFiltersCore;vtkInfovisCore;vtkFiltersExtraction;vtkFiltersStatistics;vtkImagingFourier;vtkImagingCore;vtkalglib;vtkRenderingContext2D;vtkRenderingCore;vtkFiltersGeometry;vtkFiltersSources;vtkRenderingFreeType;/usr/lib/x86_64-linux-gnu/libfreetype.so;/usr/lib/x86_64-linux-gnu/libz.so;vtkFiltersModeling;vtkImagingSources;vtkInteractionStyle;vtkInteractionWidgets;vtkFiltersHybrid;vtkImagingColor;vtkImagingGeneral;vtkImagingHybrid;vtkIOImage;vtkDICOMParser;vtkmetaio;/usr/lib/x86_64-linux-gnu/libjpeg.so;/usr/lib/x86_64-linux-gnu/libpng.so;/usr/lib/x86_64-linux-gnu/libtiff.so;vtkRenderingAnnotation;vtkRenderingVolume;vtkIOXML;vtkIOCore;vtkIOXMLParser;/usr/lib/x86_64-linux-gnu/libexpat.so;vtkIOGeometry;vtkIOLegacy;vtkIOPLY;vtkRenderingLOD;vtkViewsContext2D;vtkViewsCore;vtkRenderingContextOpenGL2;vtkRenderingOpenGL2;FLANN::FLANN (Required is at least version "1.7") -- +++ processing catkin package: 'bspline' -- ==> add_subdirectory(Fast-Planner/fast_planner/bspline) -- Eigen found (include: /usr/include/eigen3, version: 3.3.7) -- The imported target "vtkParseOGLExt" references the file "/usr/bin/vtkParseOGLExt-7.1" but this file does not exist. Possible reasons include: * The file was deleted, renamed, or moved to another location. * An install or uninstall procedure did not complete successfully. * The installation package was faulty and contained "/usr/lib/cmake/vtk-7.1/VTKTargets.cmake" but not all the files it references. -- The imported target "vtkRenderingPythonTkWidgets" references the file "/usr/lib/x86_64-linux-gnu/libvtkRenderingPythonTkWidgets.so" but this file does not exist. Possible reasons include: * The file was deleted, renamed, or moved to another location. * An install or uninstall procedure did not complete successfully. * The installation package was faulty and contained "/usr/lib/cmake/vtk-7.1/VTKTargets.cmake" but not all the files it references. -- The imported target "vtk" references the file "/usr/bin/vtk" but this file does not exist. Possible reasons include: * The file was deleted, renamed, or moved to another location. * An install or uninstall procedure did not complete successfully. * The installation package was faulty and contained "/usr/lib/cmake/vtk-7.1/VTKTargets.cmake" but not all the files it references. -- The imported target "pvtk" references the file "/usr/bin/pvtk" but this file does not exist. Possible reasons include: * The file was deleted, renamed, or moved to another location. * An install or uninstall procedure did not complete successfully. * The installation package was faulty and contained "/usr/lib/cmake/vtk-7.1/VTKTargets.cmake" but not all the files it references. -- OpenNI found (include: /usr/include/ni, lib: /usr/lib/libOpenNI.so) -- OpenNI2 found (include: /usr/include/openni2, lib: /usr/lib/libOpenNI2.so) ** WARNING ** io features related to pcap will be disabled ** WARNING ** io features related to png will be disabled ** WARNING ** io features related to libusb-1.0 will be disabled -- OpenNI found (include: /usr/include/ni, lib: /usr/lib/libOpenNI.so) -- OpenNI2 found (include: /usr/include/openni2, lib: /usr/lib/libOpenNI2.so) -- QHULL found (include: /usr/include, lib: optimized;/usr/lib/x86_64-linux-gnu/libqhull.so;debug;/usr/lib/x86_64-linux-gnu/libqhull.so) -- OpenNI found (include: /usr/include/ni, lib: /usr/lib/libOpenNI.so) -- looking for PCL_COMMON -- looking for PCL_KDTREE -- looking for PCL_OCTREE -- looking for PCL_SEARCH -- looking for PCL_SAMPLE_CONSENSUS -- looking for PCL_FILTERS -- looking for PCL_2D -- looking for PCL_GEOMETRY -- looking for PCL_IO -- looking for PCL_FEATURES -- looking for PCL_ML -- looking for PCL_SEGMENTATION -- looking for PCL_VISUALIZATION -- looking for PCL_SURFACE -- looking for PCL_REGISTRATION -- looking for PCL_KEYPOINTS -- looking for PCL_TRACKING -- looking for PCL_RECOGNITION -- looking for PCL_STEREO -- looking for PCL_APPS -- looking for PCL_IN_HAND_SCANNER -- looking for PCL_POINT_CLOUD_EDITOR -- looking for PCL_OUTOFCORE -- looking for PCL_PEOPLE -- +++ processing catkin package: 'bspline_opt' -- ==> add_subdirectory(Fast-Planner/fast_planner/bspline_opt) -- Eigen found (include: /usr/include/eigen3, version: 3.3.7) -- The imported target "vtkParseOGLExt" references the file "/usr/bin/vtkParseOGLExt-7.1" but this file does not exist. Possible reasons include: * The file was deleted, renamed, or moved to another location. * An install or uninstall procedure did not complete successfully. * The installation package was faulty and contained "/usr/lib/cmake/vtk-7.1/VTKTargets.cmake" but not all the files it references. -- The imported target "vtkRenderingPythonTkWidgets" references the file "/usr/lib/x86_64-linux-gnu/libvtkRenderingPythonTkWidgets.so" but this file does not exist. Possible reasons include: * The file was deleted, renamed, or moved to another location. * An install or uninstall procedure did not complete successfully. * The installation package was faulty and contained "/usr/lib/cmake/vtk-7.1/VTKTargets.cmake" but not all the files it references. -- The imported target "vtk" references the file "/usr/bin/vtk" but this file does not exist. Possible reasons include: * The file was deleted, renamed, or moved to another location. * An install or uninstall procedure did not complete successfully. * The installation package was faulty and contained "/usr/lib/cmake/vtk-7.1/VTKTargets.cmake" but not all the files it references. -- The imported target "pvtk" references the file "/usr/bin/pvtk" but this file does not exist. Possible reasons include: * The file was deleted, renamed, or moved to another location. * An install or uninstall procedure did not complete successfully. * The installation package was faulty and contained "/usr/lib/cmake/vtk-7.1/VTKTargets.cmake" but not all the files it references. -- OpenNI found (include: /usr/include/ni, lib: /usr/lib/libOpenNI.so) -- OpenNI2 found (include: /usr/include/openni2, lib: /usr/lib/libOpenNI2.so) ** WARNING ** io features related to pcap will be disabled ** WARNING ** io features related to png will be disabled ** WARNING ** io features related to libusb-1.0 will be disabled -- OpenNI found (include: /usr/include/ni, lib: /usr/lib/libOpenNI.so) -- OpenNI2 found (include: /usr/include/openni2, lib: /usr/lib/libOpenNI2.so) -- QHULL found (include: /usr/include, lib: optimized;/usr/lib/x86_64-linux-gnu/libqhull.so;debug;/usr/lib/x86_64-linux-gnu/libqhull.so) -- OpenNI found (include: /usr/include/ni, lib: /usr/lib/libOpenNI.so) -- looking for PCL_COMMON -- looking for PCL_KDTREE -- looking for PCL_OCTREE -- looking for PCL_SEARCH -- looking for PCL_SAMPLE_CONSENSUS -- looking for PCL_FILTERS -- looking for PCL_2D -- looking for PCL_GEOMETRY -- looking for PCL_IO -- looking for PCL_FEATURES -- looking for PCL_ML -- looking for PCL_SEGMENTATION -- looking for PCL_VISUALIZATION -- looking for PCL_SURFACE -- looking for PCL_REGISTRATION -- looking for PCL_KEYPOINTS -- looking for PCL_TRACKING -- looking for PCL_RECOGNITION -- looking for PCL_STEREO -- looking for PCL_APPS -- looking for PCL_IN_HAND_SCANNER -- looking for PCL_POINT_CLOUD_EDITOR -- looking for PCL_OUTOFCORE -- looking for PCL_PEOPLE -- +++ processing catkin package: 'path_searching' -- ==> add_subdirectory(Fast-Planner/fast_planner/path_searching) -- Eigen found (include: /usr/include/eigen3, version: 3.3.7) -- The imported target "vtkParseOGLExt" references the file "/usr/bin/vtkParseOGLExt-7.1" but this file does not exist. Possible reasons include: * The file was deleted, renamed, or moved to another location. * An install or uninstall procedure did not complete successfully. * The installation package was faulty and contained "/usr/lib/cmake/vtk-7.1/VTKTargets.cmake" but not all the files it references. -- The imported target "vtkRenderingPythonTkWidgets" references the file "/usr/lib/x86_64-linux-gnu/libvtkRenderingPythonTkWidgets.so" but this file does not exist. Possible reasons include: * The file was deleted, renamed, or moved to another location. * An install or uninstall procedure did not complete successfully. * The installation package was faulty and contained "/usr/lib/cmake/vtk-7.1/VTKTargets.cmake" but not all the files it references. -- The imported target "vtk" references the file "/usr/bin/vtk" but this file does not exist. Possible reasons include: * The file was deleted, renamed, or moved to another location. * An install or uninstall procedure did not complete successfully. * The installation package was faulty and contained "/usr/lib/cmake/vtk-7.1/VTKTargets.cmake" but not all the files it references. -- The imported target "pvtk" references the file "/usr/bin/pvtk" but this file does not exist. Possible reasons include: * The file was deleted, renamed, or moved to another location. * An install or uninstall procedure did not complete successfully. * The installation package was faulty and contained "/usr/lib/cmake/vtk-7.1/VTKTargets.cmake" but not all the files it references. -- OpenNI found (include: /usr/include/ni, lib: /usr/lib/libOpenNI.so) -- OpenNI2 found (include: /usr/include/openni2, lib: /usr/lib/libOpenNI2.so) ** WARNING ** io features related to pcap will be disabled ** WARNING ** io features related to png will be disabled ** WARNING ** io features related to libusb-1.0 will be disabled -- OpenNI found (include: /usr/include/ni, lib: /usr/lib/libOpenNI.so) -- OpenNI2 found (include: /usr/include/openni2, lib: /usr/lib/libOpenNI2.so) -- QHULL found (include: /usr/include, lib: optimized;/usr/lib/x86_64-linux-gnu/libqhull.so;debug;/usr/lib/x86_64-linux-gnu/libqhull.so) -- OpenNI found (include: /usr/include/ni, lib: /usr/lib/libOpenNI.so) -- looking for PCL_COMMON -- looking for PCL_KDTREE -- looking for PCL_OCTREE -- looking for PCL_SEARCH -- looking for PCL_SAMPLE_CONSENSUS -- looking for PCL_FILTERS -- looking for PCL_2D -- looking for PCL_GEOMETRY -- looking for PCL_IO -- looking for PCL_FEATURES -- looking for PCL_ML -- looking for PCL_SEGMENTATION -- looking for PCL_VISUALIZATION -- looking for PCL_SURFACE -- looking for PCL_REGISTRATION -- looking for PCL_KEYPOINTS -- looking for PCL_TRACKING -- looking for PCL_RECOGNITION -- looking for PCL_STEREO -- looking for PCL_APPS -- looking for PCL_IN_HAND_SCANNER -- looking for PCL_POINT_CLOUD_EDITOR -- looking for PCL_OUTOFCORE -- looking for PCL_PEOPLE -- +++ processing catkin package: 'poly_traj' -- ==> add_subdirectory(Fast-Planner/fast_planner/poly_traj) -- +++ processing catkin package: 'pose_utils' -- ==> add_subdirectory(Fast-Planner/uav_simulator/Utils/pose_utils) -- Found Armadillo: /usr/lib/libarmadillo.so (found version "9.800.4") -- +++ processing catkin package: 'so3_disturbance_generator' -- ==> add_subdirectory(Fast-Planner/uav_simulator/so3_disturbance_generator) -- Using these message generators: gencpp;geneus;genlisp;gennodejs;genpy -- +++ processing catkin package: 'odom_visualization' -- ==> add_subdirectory(Fast-Planner/uav_simulator/Utils/odom_visualization) -- Using these message generators: gencpp;geneus;genlisp;gennodejs;genpy -- +++ processing catkin package: 'local_sensing_node' -- ==> add_subdirectory(Fast-Planner/uav_simulator/local_sensing) -- Using these message generators: gencpp;geneus;genlisp;gennodejs;genpy CMake Warning at /opt/ros/noetic/share/catkin/cmake/catkin_package.cmake:166 (message): catkin_package() DEPENDS on 'Eigen' but neither 'Eigen_INCLUDE_DIRS' nor 'Eigen_LIBRARIES' is defined. Call Stack (most recent call first): /opt/ros/noetic/share/catkin/cmake/catkin_package.cmake:102 (_catkin_package) Fast-Planner/uav_simulator/local_sensing/CMakeLists.txt:70 (catkin_package) -- +++ processing catkin package: 'so3_control' -- ==> add_subdirectory(Fast-Planner/uav_simulator/so3_control) -- Using these message generators: gencpp;geneus;genlisp;gennodejs;genpy -- +++ processing catkin package: 'multi_map_server' -- ==> add_subdirectory(Fast-Planner/uav_simulator/Utils/multi_map_server) -- Using these message generators: gencpp;geneus;genlisp;gennodejs;genpy -- multi_map_server: 4 messages, 0 services -- +++ processing catkin package: 'traj_utils' -- ==> add_subdirectory(Fast-Planner/fast_planner/traj_utils) -- Eigen found (include: /usr/include/eigen3, version: 3.3.7) -- The imported target "vtkParseOGLExt" references the file "/usr/bin/vtkParseOGLExt-7.1" but this file does not exist. Possible reasons include: * The file was deleted, renamed, or moved to another location. * An install or uninstall procedure did not complete successfully. * The installation package was faulty and contained "/usr/lib/cmake/vtk-7.1/VTKTargets.cmake" but not all the files it references. -- The imported target "vtkRenderingPythonTkWidgets" references the file "/usr/lib/x86_64-linux-gnu/libvtkRenderingPythonTkWidgets.so" but this file does not exist. Possible reasons include: * The file was deleted, renamed, or moved to another location. * An install or uninstall procedure did not complete successfully. * The installation package was faulty and contained "/usr/lib/cmake/vtk-7.1/VTKTargets.cmake" but not all the files it references. -- The imported target "vtk" references the file "/usr/bin/vtk" but this file does not exist. Possible reasons include: * The file was deleted, renamed, or moved to another location. * An install or uninstall procedure did not complete successfully. * The installation package was faulty and contained "/usr/lib/cmake/vtk-7.1/VTKTargets.cmake" but not all the files it references. -- The imported target "pvtk" references the file "/usr/bin/pvtk" but this file does not exist. Possible reasons include: * The file was deleted, renamed, or moved to another location. * An install or uninstall procedure did not complete successfully. * The installation package was faulty and contained "/usr/lib/cmake/vtk-7.1/VTKTargets.cmake" but not all the files it references. -- OpenNI found (include: /usr/include/ni, lib: /usr/lib/libOpenNI.so) -- OpenNI2 found (include: /usr/include/openni2, lib: /usr/lib/libOpenNI2.so) ** WARNING ** io features related to pcap will be disabled ** WARNING ** io features related to png will be disabled ** WARNING ** io features related to libusb-1.0 will be disabled -- OpenNI found (include: /usr/include/ni, lib: /usr/lib/libOpenNI.so) -- OpenNI2 found (include: /usr/include/openni2, lib: /usr/lib/libOpenNI2.so) -- QHULL found (include: /usr/include, lib: optimized;/usr/lib/x86_64-linux-gnu/libqhull.so;debug;/usr/lib/x86_64-linux-gnu/libqhull.so) -- OpenNI found (include: /usr/include/ni, lib: /usr/lib/libOpenNI.so) -- looking for PCL_COMMON -- looking for PCL_KDTREE -- looking for PCL_OCTREE -- looking for PCL_SEARCH -- looking for PCL_SAMPLE_CONSENSUS -- looking for PCL_FILTERS -- looking for PCL_2D -- looking for PCL_GEOMETRY -- looking for PCL_IO -- looking for PCL_FEATURES -- looking for PCL_ML -- looking for PCL_SEGMENTATION -- looking for PCL_VISUALIZATION -- looking for PCL_SURFACE -- looking for PCL_REGISTRATION -- looking for PCL_KEYPOINTS -- looking for PCL_TRACKING -- looking for PCL_RECOGNITION -- looking for PCL_STEREO -- looking for PCL_APPS -- looking for PCL_IN_HAND_SCANNER -- looking for PCL_POINT_CLOUD_EDITOR -- looking for PCL_OUTOFCORE -- looking for PCL_PEOPLE -- +++ processing catkin package: 'plan_manage' -- ==> add_subdirectory(Fast-Planner/fast_planner/plan_manage) -- Eigen found (include: /usr/include/eigen3, version: 3.3.7) -- The imported target "vtkParseOGLExt" references the file "/usr/bin/vtkParseOGLExt-7.1" but this file does not exist. Possible reasons include: * The file was deleted, renamed, or moved to another location. * An install or uninstall procedure did not complete successfully. * The installation package was faulty and contained "/usr/lib/cmake/vtk-7.1/VTKTargets.cmake" but not all the files it references. -- The imported target "vtkRenderingPythonTkWidgets" references the file "/usr/lib/x86_64-linux-gnu/libvtkRenderingPythonTkWidgets.so" but this file does not exist. Possible reasons include: * The file was deleted, renamed, or moved to another location. * An install or uninstall procedure did not complete successfully. * The installation package was faulty and contained "/usr/lib/cmake/vtk-7.1/VTKTargets.cmake" but not all the files it references. -- The imported target "vtk" references the file "/usr/bin/vtk" but this file does not exist. Possible reasons include: * The file was deleted, renamed, or moved to another location. * An install or uninstall procedure did not complete successfully. * The installation package was faulty and contained "/usr/lib/cmake/vtk-7.1/VTKTargets.cmake" but not all the files it references. -- The imported target "pvtk" references the file "/usr/bin/pvtk" but this file does not exist. Possible reasons include: * The file was deleted, renamed, or moved to another location. * An install or uninstall procedure did not complete successfully. * The installation package was faulty and contained "/usr/lib/cmake/vtk-7.1/VTKTargets.cmake" but not all the files it references. -- OpenNI found (include: /usr/include/ni, lib: /usr/lib/libOpenNI.so) -- OpenNI2 found (include: /usr/include/openni2, lib: /usr/lib/libOpenNI2.so) ** WARNING ** io features related to pcap will be disabled ** WARNING ** io features related to png will be disabled ** WARNING ** io features related to libusb-1.0 will be disabled -- OpenNI found (include: /usr/include/ni, lib: /usr/lib/libOpenNI.so) -- OpenNI2 found (include: /usr/include/openni2, lib: /usr/lib/libOpenNI2.so) -- QHULL found (include: /usr/include, lib: optimized;/usr/lib/x86_64-linux-gnu/libqhull.so;debug;/usr/lib/x86_64-linux-gnu/libqhull.so) -- OpenNI found (include: /usr/include/ni, lib: /usr/lib/libOpenNI.so) -- looking for PCL_COMMON -- looking for PCL_KDTREE -- looking for PCL_OCTREE -- looking for PCL_SEARCH -- looking for PCL_SAMPLE_CONSENSUS -- looking for PCL_FILTERS -- looking for PCL_2D -- looking for PCL_GEOMETRY -- looking for PCL_IO -- looking for PCL_FEATURES -- looking for PCL_ML -- looking for PCL_SEGMENTATION -- looking for PCL_VISUALIZATION -- looking for PCL_SURFACE -- looking for PCL_REGISTRATION -- looking for PCL_KEYPOINTS -- looking for PCL_TRACKING -- looking for PCL_RECOGNITION -- looking for PCL_STEREO -- looking for PCL_APPS -- looking for PCL_IN_HAND_SCANNER -- looking for PCL_POINT_CLOUD_EDITOR -- looking for PCL_OUTOFCORE -- looking for PCL_PEOPLE -- Using these message generators: gencpp;geneus;genlisp;gennodejs;genpy -- plan_manage: 1 messages, 0 services -- +++ processing catkin package: 'uav_utils' -- ==> add_subdirectory(Fast-Planner/uav_simulator/Utils/uav_utils) -- Performing Test COMPILER_SUPPORTS_CXX11 -- Performing Test COMPILER_SUPPORTS_CXX11 - Success -- Performing Test COMPILER_SUPPORTS_CXX0X -- Performing Test COMPILER_SUPPORTS_CXX0X - Success -- Found Eigen: /usr/include/eigen3 (found version "3.3.7") -- +++ processing catkin package: 'so3_quadrotor_simulator' -- ==> add_subdirectory(Fast-Planner/uav_simulator/so3_quadrotor_simulator) CMake Warning at /opt/ros/noetic/share/catkin/cmake/catkin_package.cmake:166 (message): catkin_package() DEPENDS on 'Eigen3' but neither 'Eigen3_INCLUDE_DIRS' nor 'Eigen3_LIBRARIES' is defined. Call Stack (most recent call first): /opt/ros/noetic/share/catkin/cmake/catkin_package.cmake:102 (_catkin_package) Fast-Planner/uav_simulator/so3_quadrotor_simulator/CMakeLists.txt:25 (catkin_package) CMake Warning at /opt/ros/noetic/share/catkin/cmake/catkin_package.cmake:166 (message): catkin_package() DEPENDS on 'system_lib' but neither 'system_lib_INCLUDE_DIRS' nor 'system_lib_LIBRARIES' is defined. Call Stack (most recent call first): /opt/ros/noetic/share/catkin/cmake/catkin_package.cmake:102 (_catkin_package) Fast-Planner/uav_simulator/so3_quadrotor_simulator/CMakeLists.txt:25 (catkin_package) -- +++ processing catkin package: 'rviz_plugins' -- ==> add_subdirectory(Fast-Planner/uav_simulator/Utils/rviz_plugins) -- Using these message generators: gencpp;geneus;genlisp;gennodejs;genpy CMake Warning at /opt/ros/noetic/share/catkin/cmake/catkin_package.cmake:166 (message): catkin_package() DEPENDS on 'system_lib' but neither 'system_lib_INCLUDE_DIRS' nor 'system_lib_LIBRARIES' is defined. Call Stack (most recent call first): /opt/ros/noetic/share/catkin/cmake/catkin_package.cmake:102 (_catkin_package) Fast-Planner/uav_simulator/Utils/rviz_plugins/CMakeLists.txt:12 (catkin_package) -- Using Qt5 based on the rviz_QT_VERSION: 5.12.8 -- +++ processing catkin package: 'waypoint_generator' -- ==> add_subdirectory(Fast-Planner/uav_simulator/Utils/waypoint_generator) -- Using these message generators: gencpp;geneus;genlisp;gennodejs;genpy -- Configuring done CMake Warning (dev) at Fast-Planner/uav_simulator/so3_disturbance_generator/CMakeLists.txt:70 (add_dependencies): Policy CMP0046 is not set: Error on non-existent dependency in add_dependencies. Run "cmake --help-policy CMP0046" for policy details. Use the cmake_policy command to set the policy and suppress this warning. The dependency target "so3_disturbance_generator_gencfg" of target "so3_disturbance_generator" does not exist. This warning is for project developers. Use -Wno-dev to suppress it. -- Generating done -- Build files have been written to: /home/saber/fastplanner_ws/build #### #### Running command: "make -j2 -l2" in "/home/saber/fastplanner_ws/build" #### Scanning dependencies of target geometry_msgs_generate_messages_py Scanning dependencies of target _quadrotor_msgs_generate_messages_check_deps_StatusData [ 0%] Built target geometry_msgs_generate_messages_py Scanning dependencies of target nav_msgs_generate_messages_py [ 0%] Built target nav_msgs_generate_messages_py Scanning dependencies of target _quadrotor_msgs_generate_messages_check_deps_Odometry [ 0%] Built target _quadrotor_msgs_generate_messages_check_deps_StatusData Scanning dependencies of target _quadrotor_msgs_generate_messages_check_deps_LQRTrajectory [ 0%] Built target _quadrotor_msgs_generate_messages_check_deps_Odometry Scanning dependencies of target _quadrotor_msgs_generate_messages_check_deps_AuxCommand [ 0%] Built target _quadrotor_msgs_generate_messages_check_deps_LQRTrajectory Scanning dependencies of target _quadrotor_msgs_generate_messages_check_deps_Corrections [ 0%] Built target _quadrotor_msgs_generate_messages_check_deps_AuxCommand Scanning dependencies of target _quadrotor_msgs_generate_messages_check_deps_Gains [ 0%] Built target _quadrotor_msgs_generate_messages_check_deps_Corrections Scanning dependencies of target _quadrotor_msgs_generate_messages_check_deps_OutputData [ 0%] Built target _quadrotor_msgs_generate_messages_check_deps_Gains Scanning dependencies of target _quadrotor_msgs_generate_messages_check_deps_PositionCommand [ 0%] Built target _quadrotor_msgs_generate_messages_check_deps_OutputData Scanning dependencies of target _quadrotor_msgs_generate_messages_check_deps_PPROutputData [ 0%] Built target _quadrotor_msgs_generate_messages_check_deps_Pos
最新发布
07-13
警告`Could not find a package configuration file provided by "Eigen3"`通常是因为Eigen3的CMake配置文件没有正确安装。安装`libeigen3-dev`会提供这个文件。如果仍然找不到，可以手动指定Eigen3的路径： ```...
rust构建actix-web出现error: failed to run custom build command for `miniz-sys v0.1.11`
独自登高楼 望断天涯路
04-10 5316
问题描述 在初次使用actix-web时就遇到个大坑，cargo build或者cargo run时 报错 error: failed to run custom build command for `miniz-sys v0.1.11` process didn't exit successfully: `/Users/apple/Documents/mydream/rust/my-actix-...
cargo install cargo-tree 失败，提示“error: failed to run custom build command for `kernel32-sys v0.2.2`”
piedaocaoren的博客
09-05 3233
error: failed to run custom build command for `libssh2-sys v0.2.6` process didn't exit successfully: `C:\Users\radix\AppData\Local\Temp\cargo-install.FV5LTR5nFsKM\release\build\libssh2-sys-86a416940b...
rust编程错误集(updating)
大怀特的博客
09-26 4049
运行 error: failed to run custom build command for `openssl-sys v0.9.63` # on Ubuntu WSL solved it for me sudo apt install pkg-config libssl-dev failed to fetch `https://github.com/rust-lang/crates.io-index` 需要修改Rust Crates Registry 源 vim ~/.c.
error: failed to run custom build command for `openssl-sys v0.9.63`
跨链技术践行者
05-26 5276
windows下 编译报错 error: failed to run custom build command for `openssl-sys v0.9.63` 解决办法： 1.安装openssl Windows下： https://slproweb.com/products/Win32OpenSSL.html网站下载 https://slproweb.com/download/Win64OpenSSL-1_0_2u.exe 或 https://slproweb.com/dow..
ubuntu: cargo build error: failed to run custom build command for `openssl-sys v0.9.39`
piedaocaoren的博客
12-14 6954
cargo build error: failed to run custom build command for `openssl-sys v0.9.39`   解决方法： 1. 输入命令“sudo apt install libssl-dev” 安装最新的 libssl 包； sudo apt install libssl-dev     2.输入命令“sudo r...
Generate Signed Bundle 和 Build Bundle区别
07-25
Generate Signed Bundle和Build Bundle是Android应用程序打包过程中的两个关键步骤。 1. Generate Signed Bundle（生成签名捆绑包）：这是用于发布和部署Android应用程序的步骤。在此过程中，开发人员需要生成一个...
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值