头文件<limits.h>

本文详细解析了Linux环境下头文件&lt;limits.h&gt;的内容及其作用,该文件定义了整型数据类型的范围限制,包括各种整型变量的最大最小值等关键信息。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

头文件<limits.h>用来检测整型数据类型的表达式范围。

Linux version 2.6.32-573.el6.x86_64中<limits.h>源码:

/* Copyright (C) 1991, 1992, 1996, 1997, 1998, 1999, 2000, 2005
Free Software Foundation, Inc.
This file is part of the GNU C Library.

The GNU C Library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.

The GNU C Library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.

You should have received a copy of the GNU Lesser General Public
License along with the GNU C Library; if not, write to the Free
Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
02111-1307 USA. */

/*
* ISO C99 Standard: 7.10/5.2.4.2.1 Sizes of integer types <limits.h>
*/

#ifndef _LIBC_LIMITS_H_
#define _LIBC_LIMITS_H_ 1

#include <features.h>


/* Maximum length of any multibyte character in any locale.
We define this value here since the gcc header does not define
the correct value. */
#define MB_LEN_MAX 16


/* If we are not using GNU CC we have to define all the symbols ourself.
Otherwise use gcc's definitions (see below). */
#if !defined __GNUC__ || __GNUC__ < 2


/* We only protect from multiple inclusion here, because all the other
#include's protect themselves, and in GCC 2 we may #include_next through
multiple copies of this file before we get to GCC's. */
# ifndef _LIMITS_H
# define _LIMITS_H 1

#include <bits/wordsize.h>

/* We don't have #include_next.
Define ANSI <limits.h> for standard 32-bit words. */

/* These assume 8-bit `char's, 16-bit `short int's,
and 32-bit `int's and `long int's. */

/* Number of bits in a `char'. */
# define CHAR_BIT 8

/* Minimum and maximum values a `signed char' can hold. */
# define SCHAR_MIN (-128)
# define SCHAR_MAX 127

/* Maximum value an `unsigned char' can hold. (Minimum is 0.) */
# define UCHAR_MAX 255

/* Minimum and maximum values a `char' can hold. */
# ifdef __CHAR_UNSIGNED__
# define CHAR_MIN 0
# define CHAR_MAX UCHAR_MAX
# else
# define CHAR_MIN SCHAR_MIN
# define CHAR_MAX SCHAR_MAX
# endif

/* Minimum and maximum values a `signed short int' can hold. */
# define SHRT_MIN (-32768)
# define SHRT_MAX 32767

 

/* Maximum value an `unsigned short int' can hold. (Minimum is 0.) */
# define USHRT_MAX 65535

/* Minimum and maximum values a `signed int' can hold. */
# define INT_MIN (-INT_MAX - 1)
# define INT_MAX 2147483647

/* Maximum value an `unsigned int' can hold. (Minimum is 0.) */
# define UINT_MAX 4294967295U

/* Minimum and maximum values a `signed long int' can hold. */
# if __WORDSIZE == 64
# define LONG_MAX 9223372036854775807L
# else
# define LONG_MAX 2147483647L
# endif
# define LONG_MIN (-LONG_MAX - 1L)

/* Maximum value an `unsigned long int' can hold. (Minimum is 0.) */
# if __WORDSIZE == 64
# define ULONG_MAX 18446744073709551615UL
# else
# define ULONG_MAX 4294967295UL
# endif

# ifdef __USE_ISOC99

/* Minimum and maximum values a `signed long long int' can hold. */
# define LLONG_MAX 9223372036854775807LL
# define LLONG_MIN (-LLONG_MAX - 1LL)

/* Maximum value an `unsigned long long int' can hold. (Minimum is 0.) */
# define ULLONG_MAX 18446744073709551615ULL

# endif /* ISO C99 */

# endif /* limits.h */
#endif /* GCC 2. */

#endif /* !_LIBC_LIMITS_H_ */

/* Get the compiler's limits.h, which defines almost all the ISO constants.

We put this #include_next outside the double inclusion check because
it should be possible to include this file more than once and still get
the definitions from gcc's header. */
#if defined __GNUC__ && !defined _GCC_LIMITS_H_
/* `_GCC_LIMITS_H_' is what GCC's file defines. */
# include_next <limits.h>
#endif

/* The <limits.h> files in some gcc versions don't define LLONG_MIN,
LLONG_MAX, and ULLONG_MAX. Instead only the values gcc defined for
ages are available. */
#if defined __USE_ISOC99 && defined __GNUC__
# ifndef LLONG_MIN
# define LLONG_MIN (-LLONG_MAX-1)
# endif
# ifndef LLONG_MAX
# define LLONG_MAX __LONG_LONG_MAX__
# endif
# ifndef ULLONG_MAX
# define ULLONG_MAX (LLONG_MAX * 2ULL + 1)
# endif
#endif

#ifdef __USE_POSIX
/* POSIX adds things to <limits.h>. */
# include <bits/posix1_lim.h>
#endif

#ifdef __USE_POSIX2
# include <bits/posix2_lim.h>
#endif

#ifdef __USE_XOPEN
# include <bits/xopen_lim.h>

#endif

其中常量含义:

CHAR_BIT char的二进制位数(bit)
CHAR_MAX char的有符号整数最大值
CHAR_MIN char的有符号整数最小值
MB_LEN_MAX 多字节字符的最大字节(byte)数
INT_MAX int的有符号最大值
INT_MIN int的有符号最小值
LONG_MAX long的十进制最大值
LONG_MIN long的十进制最小值
SCHAR_MAX signedchar的十进制整数最大值
SCHAR_MIN signedchar的十进制整数最小值
SHRT_MIN short的十进制最小值
SHRT_MAX short的十进制最大值
UCHAR_MAX unsignedchar的十进制整数最大值
UINT_MAX unsignedint的十进制最大值
ULONG_MAX unsignedlongint的十进制最大值
USHRT_MAX unsignedshortint的十进制最大值
 
例:
#if VAL<INT_MIN || VAL>INT_MAX
#error values out of range
#endif
注:若VAL是double类型,会将INT_MIN隐式转换成double

转载于:https://www.cnblogs.com/Mr-Wenyan/p/7217021.html

### C语言 `limits.h` 头文件包含的宏定义常量 #### 整型数据类型的极限值 `limits.h` 定义了一系列用于描述整数类型取值范围的宏。以下是常见的整数类型及其对应的最小值最大值: - **字符类型 (`char`)** - 字符的最大值:`SCHAR_MAX`[^2] - 字符的最小值:`SCHAR_MIN` - **短整形 (`short int`)** - 短整形的最大值:`SHRT_MAX` - 短整形的最小值:`SHRT_MIN` - **整形 (`int`)** - 整形的最大值:`INT_MAX`[^5] - 整形的最小值:`INT_MIN` - **长整形 (`long int`)** - 长整形的最大值:`LONG_MAX`[^3] - 长整形的最小值:`LONG_MIN` - **无符号字符 (`unsigned char`)** - 无符号字符的最大值:`UCHAR_MAX` - **无符号短整形 (`unsigned short int`)** - 无符号短整形的最大值:`USHRT_MAX` - **无符号整形 (`unsigned int`)** - 无符号整形的最大值:`UINT_MAX` - **无符号长整形 (`unsigned long int`)** - 无符号长整形的最大值:`ULONG_MAX` #### 浮点型数据类型的极限值 虽然浮点型的数据极限通常由 `<float.h>` 提供,但在某些实现中也可能涉及部分与整型相关的边界条件。 #### 示例代码展示如何访问这些宏定义 下面是一个简单的例子来显示一些常用的整数类型的上下限: ```c #include <stdio.h> #include <limits.h> int main() { printf("Character range: %d to %d\n", SCHAR_MIN, SCHAR_MAX); printf("Short integer range: %d to %d\n", SHRT_MIN, SHRT_MAX); printf("Integer range: %d to %d\n", INT_MIN, INT_MAX); printf("Long integer range: %ld to %ld\n", LONG_MIN, LONG_MAX); return 0; } ``` 此程序会打印出不同整数类型的最小值最大值,帮助开发者理解当前平台上的具体数值限制。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值