主机重启,hang在LMX Multiplexor available处

本文讨论了在安装了VeritasStorageFoundationforOracleRAC5.0MP1的SUNT5120服务器上,节点2在主机重启时挂载在LMXMultiplexoravailable的问题。通过在/etc/system中加入forceload:drv/vxgms命令,解决了重启失败的问题。

两台SUN T5120,安装了Veritas Storage Foundation for Oracle RAC 5.0MP1,节点2在主机重启时hand在LMX Multiplexor available处。

 

SPARC Enterprise T5120, No Keyboard
Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
OpenBoot 4.30.4, 8064 MB memory available, Serial #89747934.
Ethernet address 0:21:28:59:71:de, Host ID: 855971de.

Boot device: /pci@0/pci@0/pci@2/scsi@0/disk@0,0:a  File and args:
SunOS Release 5.10 Version Generic_137111-05 64-bit
Copyright 1983-2008 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
Hostname: node2
NOTICE: VxVM vxdmp V-5-0-34 added disk array DISKS, datype = Disk

NOTICE: VxVM vxdmp V-5-3-1700 dmpnode 297/0x0 has migrated from enclosure FAKE_ENCLR_SNO to enclosure DISKS

LLT INFO V-14-1-10009 LLT Protocol available
GAB INFO V-15-1-20021 GAB available
LMX Multiplexor available

把主机引导到ok状态,然后执行boot -r,主机重启成功。

Boot device: /pci@0/pci@0/pci@2/scsi@0/disk@0,0:a  File and args:
SunOS Release 5.10 Version Generic_137111-05 64-bit
Copyright 1983-2008 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
|
Type  'go' to resume
{0} ok boot -r

SPARC Enterprise T5120, No Keyboard
Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
OpenBoot 4.30.4, 8064 MB memory available, Serial #89747934.
Ethernet address 0:21:28:59:71:de, Host ID: 855971de.

Boot device: /pci@0/pci@0/pci@2/scsi@0/disk@0,0:a  File and args: -r
SunOS Release 5.10 Version Generic_137111-05 64-bit
Copyright 1983-2008 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
Hostname: node2
NOTICE: VxVM vxdmp V-5-0-34 added disk array DISKS, datype = Disk

NOTICE: VxVM vxdmp V-5-3-1700 dmpnode 297/0x0 has migrated from enclosure FAKE_ENCLR_SNO to enclosure DISKS

Configuring devices.
LLT INFO V-14-1-10009 LLT Protocol available
GAB INFO V-15-1-20021 GAB available
LMX Multiplexor available
Nov 11 13:30:07 in.mpathd[426]: No test address configured on interface e1000g1; disabling probe-based failure detection on it
Nov 11 13:30:07 in.mpathd[426]: No test address configured on interface e1000g0; disabling probe-based failure detection on it

node2 console login:

重启成功后,用shutdown –i6 –g0 -y再次重启主机时,主机又hang在LMX Multiplexor available处。在/etc/system中加入forceload: drv/vxgms,然后再重启主机,主机启动正常。

转载于:https://www.cnblogs.com/cqubityj/archive/2011/11/11/2245705.html

评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值