无盘服务器网卡参数怎么设置,无盘网卡属性设置(详细)（Diskless network card property settings (details)）.doc...

最新推荐文章于 2021-08-12 01:21:13 发布

混沌几何画板

最新推荐文章于 2021-08-12 01:21:13 发布

阅读量476

点赞数

文章标签：无盘服务器网卡参数怎么设置

本文详细介绍了无盘网卡的各项属性设置方法，包括基本属性如网络地址（MAC）、低功耗状态、链接速度等，以及高级设置如流量控制、校验和卸载、巨型帧负载大小等。此外还提供了针对不同型号网卡（如8168/8111c、8169/8167及Marvell Yukon系列）的具体配置建议。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

无盘网卡属性设置(详细)(Diskless network card property settings (details))

Reduce the font font.

The card set (detail)

Property card

NF card advanced settings

Checksum Offload data verify the proposed closure

Flow Control flow control must be closed

IEEE802.1P Support IEEE802.1P supports the proposed closure

Jumbo Frame Payload Size is the default 1500 gigabit network is a new setting, described in detail below.

Low Power State Link Speed adapter such proposed closure

Network Address MAC to modify the default does not exist in general does not need to be changed

Optimize For CPU/Throughput CPU is optimized for throughput optimization or occupation, set to CPU, the network speed is limited, but the CPU occupancy is low, if changed to Throughput, the performance can fully play the card, but the CPU occupancy will rise a lot.

Segmentation Offload recommends closing

Speed/Duplex Settings Full Autonegotiation (adaptive, generally do not modify)

VLAN Id does not need to change the default is 1

VLAN Support VLAN supports the general closed

Wake on Magic packet wakeonmagicpacket

Wake on pattern recommends closing

WakeOnLAN From PowerOff recommends closing

8168/8111c card advanced settings

In advanced options in the card

JUMBO FRAME no change

802.1Q/1P VLAN Tagging to shut down

Flow Control to shut down