小米路由器3 mysql_小米路由器3 opkg安装

1、复制opkg到小米路由的/data路径下。

下载地址：/etc/opkg.conf文件，替换为以下内容：src/gz attitude_adjustment_base http://openwrt.sangbo.pub/barrier_breaker/14.07/ramips/mt7620a/packages/base

src/gz attitude_adjustment_packages http://openwrt.sangbo.pub/barrier_breaker/14.07/ramips/mt7620a/packages/packages/

src/gz attitude_adjustment_luci http://openwrt.sangbo.pub/barrier_breaker/14.07/ramips/mt7620a/packages/luci/

src/gz attitude_adjustment_management http://openwrt.sangbo.pub/barrier_breaker/14.07/ramips/mt7620a/packages/management/

src/gz attitude_adjustment_oldpackages http://openwrt.sangbo.pub/barrier_breaker/14.07/ramips/mt7620a/packages/oldpackages/

src/gz attitude_adjustment_routing http://openwrt.sangbo.pub/barrier_breaker/14.07/ramips/mt7620a/packages/routing/

src/gz openwrt_dist http://openwrt-dist.sourceforge.net/releases/ramips/packages

src/gz openwrt_dist_luci http://openwrt-dist.sourceforge.net/releases/luci/packages

dest root /data

dest ram /tmp

lists_dir ext /data/var/opkg-lists

option overlay_root /data

arch all 100

arch ramips 200

arch ramips_24kec 300

3、添加环境变量。修改/etc/profile文件，修改export PATH为：export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/data:/data/usr/sbin:/data/usr/bin

再这一行下面新添加一行：export LD_LIBRARY_PATH=/data/usr/lib

4、-1重启(reboot)生效

或者

4、-2设置临时变量PATH=$PATH:/data:/data/usr/bin:/data/usr/sbin

LD_LIBRARY_PATH=LD_LIBRARY_PATH:/data/usr/lib

5、更新opkgopkg update

ps：如果提示错误，缺少libc*。这里需进行安装，注意保持libc为最新版本。

cd /data

opkg install libc_*.ipk

rm -rf libc_0.9.33.2-1_ramips_24k

版权属于：逍遥子大表哥

按照知识共享署名-非商业性使用 4.0 国际协议进行许可，转载引用文章应遵循相同协议。