How to install IVI Tizen image

本文档详细介绍了如何使用bmap-tool和dd命令安装IVI Tizen系统到USB、硬盘(HD)以及eMMC。包括从何处获取bmap-tool、如何使用它,以及通过dd命令安装系统的步骤。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

How to install IVI Tizen image
Contents [hide]
1 Using bmap-tool
1.1 Where to get bmap-tool
1.2 How to use it
2 Using dd
2.1 Boot from USB
2.2 Install system to HD
2.3 Install System to eMMC
Using bmap-tool

For more detail about bmap-tool please refer to here
Where to get bmap-tool

Get it from here,select the system you want then download and unzip it
How to use it

Precondition: A bootable USB and copy bmap to it
Boot up device with the USB disk
Using local image,download the image and .bmap files from daily release,using command below
./bmap-tool copy --bmap Path_to_XXX.bmap Path_to_XXX.sdb.raw.bz2 /dev/sdX (X is the device id like sda,sdd)
Using remote image URL
./bmap-tool copy Url_path_to_image-sdb.raw.bz2 /dev/sdX
Using dd

uncompress the image file:
bunzip2 -k ivi-XXXX.raw.bz2>
It should be ivi-XXXX.raw file for dd installation.
Boot from USB

plugin the USB stick to the host machine
umount the USB stick if the USB is auto mounted:
umount /dev/sdXX ---umount all the USB stick partitions
install image to USB disk:
dd if=ivi-XXXX.raw of=/dev/sdX
make data sync
unplug the USB stick from the host machine
insert the USB stick to IVI board. power on IVI device and press ‘Del’ to access BIOS menu, change Boot Priority to make it boot from the removable USB stick, then press "Enter" to boot image from USB disk.
Install system to HD

Prepare a bootable USB stick(with linux OS burned e.g.Tizen or MeeGo image)
Copy the IVI image ivi-XXXX.raw.bz2 to the USB stick
Insert the USB stick into IVI board
Press ‘Del’ to access BIOS menu, change Boot Priority to make it boot from the removable USB stick
Live boot into the system in USB(e.g. Tizen or MeeGo)
Launch terminal or switch to console in live boot env, login as root
Check the disk partition by “fdisk –l”. You should see some information about /dev/sda, /dev/sdb. On Crossville platform, you could get inforamtion about eMMC stick: /dev/mmcblk0.
When /dev/sda is the loaction where you will install Tizen image, and /dev/sdb is the USB stick now boot in.
umount /dev/sda
install image to local HD:
dd if=ivi-XXXX.raw of=/dev/sda
make data sync with USB and HD
The Tizen image has been installed to HD, remove USB stick, you could boot to the system installed in HD.
Install System to eMMC

For the Crossville platform, When eMMC is the location where you will install Tizen image,and /dev/sdb is the USB stick now boot in. check the eMMC name:
fdisk -l
umount all the eMMC partitions:
umount /dev/mmcblk0pX
copy image to eMMC:
dd if=ivi-XXXX.raw of=/dev/mmcblk0
make data sync with eMMC and USB.
The Tizen image has been installed to eMMC on Crossville, remove USB stick, you could boot to the system installed in eMMC.
一、综合实战—使用极轴追踪方式绘制信号灯 实战目标:利用对象捕捉追踪和极轴追踪功能创建信号灯图形 技术要点:结合两种追踪方式实现精确绘图,适用于工程制图中需要精确定位的场景 1. 切换至AutoCAD 操作步骤: 启动AutoCAD 2016软件 打开随书光盘中的素材文件 确认工作空间为"草图与注释"模式 2. 绘图设置 1)草图设置对话框 打开方式:通过"工具→绘图设置"菜单命令 功能定位:该对话框包含捕捉、追踪等核心绘图辅助功能设置 2)对象捕捉设置 关键配置: 启用对象捕捉(F3快捷键) 启用对象捕捉追踪(F11快捷键) 勾选端点、中心、圆心、象限点等常用捕捉模式 追踪原理:命令执行时悬停光标可显示追踪矢量,再次悬停可停止追踪 3)极轴追踪设置 参数设置: 启用极轴追踪功能 设置角度增量为45度 确认后退出对话框 3. 绘制信号灯 1)绘制圆形 执行命令:"绘图→圆→圆心、半径"命令 绘制过程: 使用对象捕捉追踪定位矩形中心作为圆心 输入半径值30并按Enter确认 通过象限点捕捉确保圆形位置准确 2)绘制直线 操作要点: 选择"绘图→直线"命令 捕捉矩形上边中点作为起点 捕捉圆的上象限点作为终点 按Enter结束当前直线命令 重复技巧: 按Enter可重复最近使用的直线命令 通过圆心捕捉和极轴追踪绘制放射状直线 最终形成完整的信号灯指示图案 3)完成绘制 验证要点: 检查所有直线是否准确连接圆心和象限点 确认极轴追踪的45度增量是否体现 保存绘图文件(快捷键Ctrl+S)
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值