centos6.5安装及管理docker

Docker安装部署超详细教程(2021版) 一、前提条件 1.1. 内核 Docker运行对内核要求比较高,因此一般建议直接在Ubuntu这样的平台运行。但作为一个容器标准,Docker也是支持其他如CentOS, Mac OS X, Windows等平台。目前Docker支持以下版本CentOS: CentOS 7(64位) CentOS 6.5(64位)及以后 在运行CentOS 6.5及以后版本时,需要内核版本>=2.6.32-431,因为这些内核包含了运行Docker的一些特定修改。 $ uname -r 2.6.32-43 阅读详情
使用的操作系统是是centos6.5,按照官方的推荐的配置,把linux内核升级到3.8以上。安装步骤如下:


1、升级内核版本(包含aufs)
cd /etc/yum.repos.d
wget http://www.hop5.in/yum/el6/hop5.repo
yum install kernel-ml-aufs kernel-ml-aufs-devel


2、修改引导的内核
vi /etc/grub.conf
把默认的引导文件设置为0。因为升级内核之后,新的内核在第一个(0)位置。


3、重启系统,使用新的内核
#检查内核版本:
uname  -r
3.10.5-3.el6.x86_64
#检查aufs是否存在
grep aufs /proc/filesystems
nodev     aufs


4、安装相应的epel源
wget http://ftp.riken.jp/Linux/fedora/epel/6/x86_64/epel-release-6-8.noarch.rpm
rpm -ivh  epel-release-6-8.noarch.rpm


5、安装docker
yum -y install docker-io


6、启动docker
启动docker进程:service docker start
查看docker进程:ps -ef |grep docker
root      1878     1  0 18:33 ?        00:00:00 /usr/bin/docker -d
root      2307  2201  0 18:52 pts/0    00:00:00 grep docker


7、Docker常用命令讲解
docker  version #查看版本
docker  search centos#搜索可用docker镜像
docker  images 查看当前docker所有镜像
docker  pull  centos #下载镜像
cat   centos.tar | docker import  -  centos6  #Docker导入镜像
docker  export  id  > cenos6.tar  #Docker导出镜像
docker  run   centos echo "hello word"#在docker容器中运行hello world!
docker  run  centos yum install ntpdate#在容器中安装ntpdate的程序
docker  ps -l 命令获得最后一个容器的id,docker   ps  -a查看所有的容器。
运行docker commit 提交刚修改的容器,例如:
docker  commit  2313132  centos:v1
docker run -i -t centos /bin/bash 在容器里启动一个/bin/bash shell环境,可以登录进入操作,其中-t 表示打开一个终端的意思,-i表示可以交互输入。
docker run -d -i -t centos /bin/bash 在后台启动
docker attach CONTAINER ID 进入在后台启动后的这个容器
docker  run  -d  centos:v1  /bin/bash  ,-d表示在后台启动,以daemon方式启动。
docker run -d -p 80:80 -p 8022:22 centos:latest /usr/bin/sshd -D
docker stop  id 关闭容器
docker start  id 启动某个容器
docker  rm  id 删除容器,docker  rmi  images删除镜像
进入容器:
如果 docker 版本已经在 1.3 以上了, 那么可以用 docker exec 这个命令:
docker exec -it <CONTAINER ID> /bin/bash             /这样你就进到这个container 里面了,这个bash退出也不会影响之前 docker run 启动的 bash/
docker  -p 80:80 centos 代表映射 




8.docker 初体验 


获取一个docker镜像
docker  pull centos
列出所有docker镜像
docker  images 


在容器里启动一个/bin/bash
docker run centos /bin/bash




9.体验docker hub
创建 docker hub 帐号 
docker login
然后就注册用户名密码 


然后在使用 docker login 登录










8、Docker独立IP及容器互联
service docker stop
ifconfig docker0 down
brctl delbr docker0
cd /etc/sysconfig/network-scripts/


vi ifcfg-eth0
DEVICE=eth0
BOOTPROTO=none
ONBOOT=yes
TYPE=Ethernet
BRIDGE="br0"
BOOTPROTO=static


vi ifcfg-br0
DEVICE="br0"
ONBOOT=yes
NM_CONTROLLED=no
BOOTPROTO=static
TYPE=bridge
IPADDR=192.168.1.165
NETMASK=255.255.255.0
GATEWAY=192.168.1.1
DNS=192.168.1.50


vi /etc/sysconfig/docker
other_args="-b=br0"


service docker start
[root@localhost ~]# ps -ef|grep docker
root      5502     1  0 01:23 pts/3    00:00:00 /usr/bin/docker -d -b=br0
root      5800  5311  0 01:47 pts/3    00:00:00 grep docker


service network restart
可能会报以下错误:
Shutting down interface eth0:                              [  OK  ]
Shutting down loopback interface:                          [  OK  ]
Bringing up loopback interface:                            [  OK  ]
Bringing up interface br0:  Determining if ip address 192.168.1.161 is already in use for device br0...
                                                           [  OK  ]
Bringing up interface eth0:  Error: Connection activation failed: Master connection not found or invalid
                                                           [FAILED]
解决方法:
此时,当前网卡也是可以通信的,但是通过网络管理工具修改IP之后,当前修改操作是不会生效的。那如何消除这个提示呢?
其实,问题的原因是RedHat自己开发的NetworkManager管理工具和/etc/sysconfig/network-scripts/ifcfg-ethx配置不同步造成的。如果要消除这个提示,请关闭NetworkManager服务即可:
chkconfig NetworkManager off  
service NetworkManager stop  
Stopping NetworkManager daemon:                            [  OK  ]
此时,再重新加载network服务即可:
service network restart
Shutting down interface br0:                               [  OK  ]
Shutting down loopback interface:                          [  OK  ]
Bringing up loopback interface:                            [  OK  ]
Bringing up interface br0:  Determining if ip address 192.168.1.161 is already in use for device br0...
                                                           [  OK  ]
Bringing up interface eth0:  device eth0 is already a member of a bridge; can't enslave it to bridge br0.
                                                           [  OK  ]




   
9、为容器手动配置静态ip    
安装新的 iproute 包:
wget https://repos.fedorapeople.org/repos/openstack/openstack-icehouse/epel-6/iproute-2.6.32-130.el6ost.netns.2.x86_64.rpm
yum localinstall iproute-2.6.32-130.el6ost.netns.2.x86_64.rpm


安装pipework:
git clone https://github.com/jpetazzo/pipework     
cp ~/pipework/pipework /usr/local/bin/
启动Docker容器:
docker run -itd --net=none jdeathe/centos-ssh:latest /bin/bash


docker exec -it <CONTAINER ID> /bin/bash  /这样你就进到这个container 里面了,这个bash退出也不会影响之前 docker run 启动的 bash/


pipework br0 <CONTAINER ID> 192.168.1.170/24@192.168.1.1


10、制作可以ssh登录的本地Docker镜像
安装制作CentOS镜像的工具:
yum -y install febootstrap


制作CentOS镜像文件centos6-image目录:
febootstrap -i bash -i wget -i yum -i iputils -i iproute -i man -i vim-minimal -i openssh-server -i openssh-clients centos6 centos6-image http://mirrors.aliyun.com/centos/6/os/x86_64/


制作Docker镜像,镜像名字是centos6-base:
cd centos6-image && tar -c .|docker import - centos6-base


制作可以ssh登陆的Docker镜像,名字是centos6-ssh:
docker build -t centos6-ssh https://git.oschina.net/feedao/Docker_shell/raw/start/Dockerfile


经过前面的六个步骤,一个可以登陆的本地docker镜像就制作好了。
用户名是:root,密码是:123456

13671648877#MyNote#centos6.5_安装docker1 CentOS6.5 安装docker升级内核升级3.10内核yum安装带aufs模块的3.10内核修改grub的主配置文件修改grub的主配置文件/etc/gr 立即下载

相关推荐

Linux系统下Materials Studio 2020安装避坑指南:从依赖包到许可证配置全流程

本文提供了一份在Linux系统上安装Materials Studio 2020的深度避坑指南。详细解析了从系统依赖包检查、安装流程、许可证配置到Gateway服务部署的全过程,并分享了与Slurm作业调度系统集成的实战经验,旨在帮助用户高效、稳定地完成部署。

weixin_29313547的博客 387

centos6.5 安装docker

【代码】centos6.5 安装docker。

qq_21295455的博客 733

【5G全网建设】Option3X和Option2模式建安市、兴城市和四水市核心网、承载网网络设计与部署

拓扑规划: Option 3X网络拓扑图规划 Option 2网络拓扑图规划 设备部署: 建安市核心网 建安市承载中心机房 建安市骨干汇聚机房 建安市3区汇聚机房 建安市C站点无线机房 兴城市核心网 兴城市承载中心机房 兴城市骨干汇聚机房 兴城市2区汇聚机房 兴城市B站点无线机房 数据配置: 建安市核心网 建安市承载中心机房 建安市骨干汇聚机房 建安市3区汇聚机房 建安市C站点无线机房 兴城市核心网 兴城市承载中心机房 兴城市骨干汇聚机房 兴城市2区汇聚机房 兴城市B站点无线机房 业务调试

weixin_67183034的博客 8870

CentOS6.5安装Docker

CentOS6.5安装Docker

nooneyanghuijava的专栏 869

利用Nginx反向代理实现GitLab自定义域名的高效配置

本文详细介绍了如何利用Nginx反向代理实现GitLab自定义域名的高效配置。通过统一域名管理、性能优化和安全加固,提升GitLab的访问效率和安全性。文章包含前期准备、GitLab基础配置、Nginx反向代理设置及常见问题排查,帮助开发者快速完成部署。

weixin_28834169的博客 165

树莓派4B串口舵机控制全攻略:从pigpio库安装到Python脚本调试

本文详细介绍了如何在树莓派4B上通过pigpio库和Python脚本实现串口舵机的精确控制。从硬件串口配置、pigpio库安装到舵机通信协议解析和Python脚本开发,提供了完整的解决方案和调试技巧,适用于机械臂控制等实际项目应用。

k8s6orchestrator的博客 431

CentOs6.5上安装Docker完整版

早上上班发现之前win10更新了一次,台式机上安装的虚拟机打开变得超级慢,更不要说查看docker相关东西,烦人。只能在自己笔记本上安装docker,测试下案例。 —————————————————————————————————————————————————— 步骤: 1、在本机安装Docker需要的epel库(yum安装epel库) 命令:yum install -y epel-...

在路上 1652

【RT-DETR多模态融合改进】| 自研 多模态大核选择模块:MM_LSK,适配多模态图像信息融合

本文记录的利用改进的多模态大核选择模块(MM-LSK)优化RT-DETR,构建可见光-红外双模态目标检测网络。在遥感等大尺寸图像的可见光-红外双模态小目标检测任务中,单模态检测易受光照、云雾、背景干扰等因素影响,且小目标外观信息匮乏,无法仅基于单模态外观实现较好的识别,因此需要融合双模态互补特性与广泛的跨模态上下文信息进行辅助。

Limiiiing的博客 383

CentOS 6.5下安装Docker

Docker 是一个开源的应用容器引擎,让开发者可以打包他们的应用以及依赖包到一个可移植的容器中,然后发布到任何流行的 Linux 机器上,也可以实现虚拟化。容器是完全使用沙箱机制,相互之间不会有任何接口。 一个完整的Docker有以下几个部分组成: DockerClient客户端 Docker Daemon守护进程 Docker Image镜像 DockerContainer容器 [2] 1....

weixin_33895475的博客 273

基于 YOLOv26 的校园安全监控系统:多场景应用

本文提出了一种基于YOLOv26的校园安全监控系统,采用多场景应用架构实现对校园安全的智能监测。系统核心技术包括YOLOv26目标检测、DeepSORT目标跟踪、区域安全定义和行为分析等模块,通过边缘计算平台实现实时处理。研究构建了包含多种校园场景的专业数据集,并采用数据增强技术提升模型性能。系统可检测人员、车辆和物品等目标,分析其行为轨迹,评估安全风险并触发告警。实验结果表明,该系统能有效识别校园安全隐患,为安全管理提供智能化解决方案。

一键难忘的博客 507

嵌入式铁头山羊stm32:一文总结

本文是一篇STM32嵌入式开发的综合知识总结,涵盖了STM32基础概念、GPIO、通信协议、外设驱动等核心内容。文章首先介绍了STM32的基本概念和型号含义,然后详细讲解了GPIO的8种工作模式及实验案例。接着重点阐述了USART、I2C、SPI三种通信协议的原理和实现方法,包括硬件连接、编程接口和实验应用。此外还介绍了OLED显示原理、中断系统、定时器、ADC转换等关键技术,每个模块都配有对应的实验案例和代码实现参考。文章内容全面系统,既包含理论知识,又提供实践指导,适合作为STM32开发的快速参考手册。

古泽汉书的博客 2794

Centos6.5 安装以及管理docker

使用的操作系统是是centos6.5,按照官方的推荐的配置,把linux内核升级到3.8以上。安装步骤如下: 1、升级内核版本(包含aufs) cd /etc/yum.repos.d wget http://www.hop5.in/yum/el6/hop5.repo yum install kernel-ml-aufs kernel-ml-aufs-devel 2、修改引导的内核 vi /etc/...

qq_37657601的博客 215

Modbus协议学习第一篇之基础概念

因工作需要而接触Modbus,正在恶补知识,利用博客的方式来加深理解和记忆,同时希望同行大佬能一起交流。

hzf978742221的博客 883

Centos6.5安装和使用docker

rpm -ivh http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm yum install docker-io -y service docker on chkconfig docker on 本来是想使用centos7.2玩docker,笔记本上没装,先用centos...

weixin_30367169的博客 85

LinePhone3.2.7(android端最新版本) sip客户端

SIP客户端For android:LinePhone3.2.7(最新版本),官网地址:http://www.linphone.org/

C# WinForm 基于DirectShow.dll编写的程序,可边预览边保存视频,音频和图片

基于微软的DirectShow.dll的二次开发1.自动识别连接的摄像头跟麦克风且可以对其进行选择(默认选中第一个)2.可录制wmv和avi两种格式的视频并且都带有音频,avi可以录制的分辨率和帧数进行选择,wmv默认进行了淸晰度优化如不喜欢可去除代码中有相关提示3.可在预览点开之后进行拍照,也可边录制视频边拍照4.添加了视频和音频的压缩功能(酌情使用)这次二次开发发现C#对DirectShow的相关信息太少,这次做完也不敢藏私共享出来,还望大家指正

CentOS相关-CentOS 6.5安装Docker

Docker支持以下的CentOS版本 CentOS 7 (64-bit) CentOS 6.5 (64-bit) 或更高的版本 前提条件 目前,CentOS 仅发行版本中的内核支持 Docker。 Docker 运行在 CentOS 7 上,要求系统为64位、系统内核版本为 3.10 以上。 Docker 运行在 CentOS-6.5 或更高的版本的 CentOS 上,要求系统为64位...

半度微凉 862

精雕软件(JDpaint) 5.5 绿色版

精雕软件(JDpaint) 5.5 绿色版精雕软件(JDpaint) 5.5 绿色版精雕软件(JDpaint) 5.5 绿色版

docker常用命令

1.docker的安装及使用 系统版本:centos6.5 1.安装docker yum install -y docker-io 2.启动docker service docker start 3.安装docker镜像 docker pull {docker镜像地址} 4.下载docker rpm卸载方式 rpm -qa | grep d...

何超杰的博客 5247

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

阿里云Centos6.5安装配置docker

阿里云Centos6.5安装配置docker

Developer of XingKong22star 4200

docker学习笔记(一)

Docker安装前升级内核3.10 机智如我丶 2015-09-14 22:53:00 浏览98 评论0 摘要: Docker安装前_升级内核至3.10 首先,大家如果看到有什么不懂的地方,欢迎吐槽!!! 我会在当天或者第二天及时回复,并且改进~~ 对于一些使用Centos 6.x的朋友,想换7可是公司架构比较稳定,而且不是说换就换的。那么,这篇文章主要是讲解如何在centos6....

C2137248的博客 796

Docker安装应用(CentOS 6.5_x64)

Docker安装应用(CentOS 6.5_x64) Authoer::jom_ch@2014/7/23 Docker官网 http://www.docker.com/ 一,安装EPEL   关于EPEL:https://Fedoraproject.org/wiki/EPEL/zh-cn    >rpm -ivh http://dl.fedoraproject.org/p

lizhijun3931的博客 344

Docker安装准备

第一次写作下笔记: 以centos6.5安装yum优先级插件 yum install yum-priorities 1.epel简介: https://fedoraproject.org/wiki/EPEL/zh-cn rpm -Uvh http://mirrors.ustc.edu.cn/fedora/epel/6/x86_64/epel-release-6-8.n...

diaoyu8833的博客 133

linux6.5安装软件,Docker安装应用(CentOS 6.5_x64)

Docker安装应用(CentOS 6.5_x64)Authoer::jom_ch@2014/7/23Docker官网 http://www.docker.com/一,安装EPEL关于EPEL:https://Fedoraproject.org/wiki/EPEL/zh-cn>rpm -ivh http://dl.fedoraproject.org/pub/epel/6/i386/epel-...

weixin_35063366的博客 129

Docker install

Docker install 一、 Docker 安装要求 64位操作系统 最好是3.8以上内核 二、 Cent OS 6.5 默认内核为 2.6 1. 升级内核 a) 先执行以下命令 rpm --import https://www.elrepo.org/RPM-GPG-KEY-elrepo.org rpm -ivh http://www.elrepo.org/e...

'昨天' 828

centos docker安装

Docker支持以下的CentOS版本: CentOS 7 (64-bit) CentOS 6.5 (64-bit)或更高的版本 前提条件 目前,CentOS 仅发行版本中的内核支持 Docker。 Docker 运行在 CentOS 7 上,要求系统为64位、系统内核版本为 3.10 以上。 Docker 运行在 CentOS-6.5 或更高的版本的 CentOS 上,要求系统为64...

DragonKJ的博客 164

在docker的centos7上安裝rabbitmq3.6.5

1、拉取镜像文件:docker pull centos 2、建立容器,且shell方式进入:docker run -it --name centos.rabbit centos /bin/bash 3、安装gcc: yum -y install make gcc gcc-c++ kernel-devel m4 ncurses-devel openssl-devel 4、安装wget:wget

lxhjh的专栏 3091
上一篇: MySQL 使用explain分析sql语句的查询效率(一)
下一篇: 获取镜像
王树民
博客等级 码龄10年 912粉丝 560原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值