Upgrade CLE Steps
On you desktop
- Copy
CLEinstallation file to your server. My server isUbuntu, IP address is:192.168.100.7。
scp cle-2.6.1.linux.x64.bin landingsite@192.168.100.7:/tmp
On your server
- login in your server via
SSH.
ssh landingsite@192.168.100.7
- Move the installation file from
/tmpto~.
mv /tmp/cle-2.6.1.linux.x64.bin .
- Switch to super user. !!!IMPORTANT!!!
sudo su
- See
CLEversion which is running.
cle version
- Stop
CLEservice before upgrading.
cle service stop
- Make the installation file executable.
chmod +x ./cle-2.6.1.linux.x64.bin
- Installing.
./cle-2.6.1.linux.x64.bin
- See
CLEversion for double-check.
cle version
Logs shown on console.
CLE Version: 2.6.1
Algorithm Version: 2.6.1
Web Debugger Version: 2.2.1
- Start
CLEservice
cle service start
Logs shown if everything is OK
[LOG 21-10-12 11:16:35] Project Configured at /root/.corelink/cle/.cle.cpa
[LOG 21-10-12 11:16:35] CPA Version: 1.0.0
name: LandingSiteOffice
isPusher: false
managerApiUrl: http://localhost:18002
managerKey: ***
managerSecret: ***
category: null
version: 1.0.0
networks: [object Object]
heartbeatInterval: 5000
beaconAuditTime: 200
gatewayAuditTime: 5000
gatewayLifeTime: 30000
workerLifeTime: 60000
pusherUdpPort: 0
beaconUserdataMaxCachedTs: 100000
[LOG 21-10-12 11:16:35] Algorithm configured.
+ Beacon height: 1
[LOG 21-10-12 11:16:35] 2 AOA gateways configured.
[LOG 21-10-12 11:16:35] 0 RSSI gateways configured.
[LOG 21-10-12 11:16:35] Out log at /root/.corelink/cle/logs/out.log
[LOG 21-10-12 11:16:35] Err log at /root/.corelink/cle/logs/err.log
[LOG 21-10-12 11:16:36] CLE started
- Done!
该篇博客详细介绍了如何在Ubuntu服务器上进行CLE(可能是某种软件或服务)的升级操作,包括通过SCP将安装文件传输到服务器,切换到超级用户,检查当前版本,停止服务,使安装文件可执行,执行安装,再次确认版本,并启动服务的过程。日志显示升级成功,服务已启动并配置完毕。
227

被折叠的 条评论
为什么被折叠?



