【无标题】

Qt-无标题窗口         今天学习了下无标题窗口,于是来记录下我的学习过程首先建立一个Qt Widgets Application继承QWidget类创建完后直接运行就得到了如下效果那么,既然是无标题窗口就要去掉窗口栏啊,于是加上setWindowFlags(Qt::FramelessWindowHint | Qt::WindowMinimizeButtonHint);去掉标题栏,但是这样整个窗口就不能移动... 阅读详情

CS-350 - Fundamentals of Computing Systems

Homework Assignment #2 - EVAL

Due on September 26, 2024 — Late deadline: September 28, 2024 EoD at 11:59 pm

EVAL Problem 1

In this EVAL assignment we will start to explore how to discover characteristics of incoming workload, we will dive into how to measure the overheads of our systems, and we will also study the properties how queues evolve in response to varying traffic conditions.

a) First thing first, let’s try to make sense out of the workload that is coming from the client. You might recall that by invoking the client with various values of the -a and -s parameters significantly impacts the load seen by your server. Now it is time to reverse-engineer the characteristics of that traffic. Start with the following to collect the report of 1,000 packets handled at the server:

./server_mt 2222 & ./client -a 6 -s 10 -n 1000 2222

Now, isolate only the lengths of the requests as they are sent from the client. With that, produce a plot of the distribution of the request lengths you have collected. The distribution plot should have on the x-axis a set of time bins, e.g., from 0 (included) to 0.005 (excluded), from 0.005 (included) to 0.010 (excluded), and so on in steps of 0.005 increments. Given each transaction, look at its length. If it is in the range between 0.005 and 0.010 seconds, it falls in the second bin; if it is in the range between 0.010 and 0.015, it falls in the third bin and so on.

On the y-axis, plot how many requests fall in each bin! But do not plot the raw count. Rather, normalize that value by the total number of requests you are plotting. In this case, 1,000. Hooray! You have produced a distribution plot.

b) By using the same procedure used in the previous part, produce a distribution plot of the inter-arrival time between any two subsequent requests. Say that request R0 is sent (look at the sent timestamp!) arrives at t0 = 10s and R1 is sent at t1 = 15s, then the inter-arrival time between them is t iat0,1 = (t1−t0).

Compute all the 999 inter-arrival times you have observed and plot their distribution just like you did above, except that this time you will normalize by 999.

c) Time to reverse-engineer things! Let’s start from the distribution of request lengths. Use your favorite programming language to generate 10,000 samples from the following theoretical distributions:

(1) A Normal distribution with mean 1/10 and standard deviation 1;

(2) An Exponential distribution with mean 1/10;

(3) A uniform. distribution with mean 1/10.

Plot these distribution together (on the same plot, just different lines) with the distribution you previ-ously acquired from your server run. Thus, your plot should have a total of 4 different lines (I suggest having lines instead of bars for this plot) in it. Then, comment on which ones of the curves matches more closely with the experimental data. If there is one of them that matches remarkably close, you have successfully reverse-engineered the characteristics of your input load!

d) Do the same with the inter-arrival times. But this time, compare it with the following three references:

(1) A Normal distribution with mean 1/6 and standard deviation 1;

(2) An Exponential distribution with mean 1/6;

(3) A uniform. distribution with mean 1/6.

Produce the comparison plot and comment on the match between the experimental and theoretical curves. At this point, can you tell me what the -a and -s parameters control, exactly?

EVAL Problem 2

In this EVAL problem, we will start to study the relationship between utilization, throughput, and queues in response to changing load conditions.

a) First thing first, learn how to take a good queue size average. A good queue average measurement should consider the amount of time the queue remains in a certain state, i.e., it should be a timed average of the queue length.

Let us make an example. Say that your queue at t = 0 has 3 elements in it, and it stays that way until time t = 9 sec, at which point the queue becomes empty. If you do not consider time, the average size would be q = (3 + 0)/2 = 1.5. But this is incorrect: most of the time we see the queue with 3 elements, and only at the end with 0. So an average of 1.5 seems wrong.

The right way to take the average is by weighting the queue state by the time it stays in that state. Thus, the right way to calculate q in our example is q = 3 · (10/9) + 0 · (10/1) = 2.7. You can see how this is a better average of queue size over a 10 seconds time window starting from time t = 0.

Now, measure the queue length for the case where your queue-enabled server is invoked with the following parameters:

./server_q 2222 & ./client -a 14 -s 15 -n 1000 2222

Use the queue snapshots produced by the worker thread to measure the queue size as it was observed after each request was observed. Use the time elapsed between two subsequent queue snapshots to weigh that size towards the total average.

b) Now let us repeat the computation of the queue size average as in Q?? but this time sweep through the -a parameter passed to the server. In particular, run the first experiment for a value of 1; then a second time with a value of 2; and so on until and including the case where the value is 15. Thus, you will run 15 experiments in total. This might take a while, so try to automate the runs and dump the results into a file for later analysis.

By reusing what you learned in hw1, also extract utilization and response time averages from each of the 15 experiments. Now, you should have three sets of 15 values each: (1) utilization, (2) average response time, (3) average queue length.

Finally, produce a plot that depicts the trend of the average response time (on the y-axis as line 1) and average queue size (on the y-axis as line 2) as a function of the server utilization x-axis. What relationship do you discover between how response time and queue length averages evolve as a result of increasing utilization?

c) By looking at the plot produced above, can you conclude that there is some fixed proportional rela-tionship between queue length and response time? Is there something in the theory covered so far capable of modeling this relationship?

C# 移动无标题栏无边框窗体的3种方法 目录 第一种:手工移动 第二种:调用系统API 1.引入下面代码 前提需要引入命名空间using System.Runtime.InteropServices 2.增加鼠标按下事件发送消息,让系统误以为按下是标题栏 第三种,重写 WndProc 第一种:手工移动 直接通过修改窗体位置从而达到移动窗体的效果 //定义一个位置信息Point用于存储鼠标位置 private Point mPoint; /// <summary> 阅读详情

相关推荐

从MRF8P9040N数据手册到ADS仿真:手把手教你搞定LDMOS功放设计(附完整模型下载)

本文详细解析了MRF8P9040N LDMOS功率放大器的数据手册关键参数,并提供了在ADS中进行仿真的完整指南。从模型导入、直流工作点验证到负载牵引与阻抗匹配设计,逐步指导工程师完成高效功放设计。文章还包含调试技巧和常见问题解决方案,帮助优化射频功放性能。

weixin_27015733的博客 493

Delphi无标题窗体增强功能实现:让无标题窗体更具交互性

Delphi无标题窗体增强功能实现:让无标题窗体更具交互性 去发现同类优质开源项目:https://gitcode.com/ 项目介绍 在软件开发领域,Delphi 语言因其高效的执行速度和清晰的语法结构,一直受到开发者的喜爱。然而,在使用无标题窗体(borderstyle=bsnone)时,开发者常常面临一个问题:用户无法通过常规方式来移动或调整窗体大小。本项目正是为了解决这一难题而诞生,它提供...

gitblog_06708的博客 1035

解决fetch_california_housing数据集403错误的三种实用方法

本文针对机器学习初学者加载fetch_california_housing数据集时常见的HTTPError 403: Forbidden错误,提供了三种经过实测的解决方案。详细介绍了手动下载与本地替换、修改源码下载路径以及配置网络访问策略的具体步骤,帮助用户根据自身网络环境和开发场景选择最佳方法,确保数据集顺利加载。

weixin_29074295的博客 553

无标题栏窗口拖动的实现

普通的Windows应用程序窗口都具有统一的窗口风格,它们一般都包括:用户区和非用户区两部分。非用户区包括标题条、窗口边框、最大化按钮、最小化按钮、关闭按钮和系统默认的快捷键及鼠标支持等。利用鼠标的左键通过拖动窗口的标题条可以在屏幕上任意移动整个窗口,当光标停止在窗口边框上时可以改变窗口的大小。在一些比较经典的软件中,有一类特殊的无标题条的窗口。这种窗口不需要改变窗口的大小,但必须具有窗口客户区域

ArduousBonze的专栏 4063

保姆级教程:Halcon 3D点云匹配与差异分析避坑指南(从采样到可视化)

本文提供了一份详细的Halcon 3D点云匹配与差异分析实战指南,涵盖从模型准备到可视化的全流程。重点解析了STL文件读取单位误区、点云采样密度优化、表面模型创建技巧以及差异分析的专业手法,帮助用户避开常见陷阱,提升工业检测效率与精度。

weixin_33728268的博客 402

黑马Java第二阶段:JavaWeb(笔记)

黑马Java第二阶段:JavaWeb(笔记)

chen的博客 5671

无标题窗口的拖动

普通的Windows应用程序窗口都具有统一的窗口风格,它们一般都包括:用户区和非用户区两部分。非用户区包括标题条、窗口边框、最大化按钮、最小化按钮、关闭按钮和系统默认的快捷键及鼠标支持等。利用鼠标的左键通过拖动窗口的标题条可以在屏幕上任意移动整个窗口,当光标停止在窗口边框上时可以改变窗口的大小。在一些比较经典的软件中,有一类特殊的无标题条的窗口。这种窗口不需要改变窗口的大小,但必须具有窗口客户区域

lianxiao1314的专栏 1003

MetaGPT核心模块:Data Interpreter 上手实战 - 数据分析和可视化(附运行过程详解)

上篇文章我们详细解读了 DataInterpreter 的实现原理(论文),本文将开始上手实操,开始写代码用上 DataInterpreter。从最简单的例子开始,先给大家看下其运行过程,看下DataInterpreter是如何自动拆解任务,完成任务的,帮助大家构建直观认识。

同学小张的博客 376

C#拖动无标题栏窗体

很长时间没有写博客了,今天又解决并测试通过了一个Delphi很简单的问题——无标题栏窗体的拖动 。其实是个很简单的问题,但是还是想写下来,一方面加深自己的记忆,一方面与朋友们分享!DeviceAnywhere在Ioicn发布了,反响似乎一般,我想是因为.net FrameWork环境的问题吧,希望Microsoft再出sp的时候把.net FrameWorkx.x集成到操作系统里吧,这样大家都方便

Windows Mobile 开发历险 1963

Arduino 系列:Arduino Due 系列 (基于 ATSAM3X8E)_(5).电源管理与电压调节

电源管理与电压调节是确保嵌入式系统稳定性和可靠性的关键环节。通过合理选择电源输入方式、使用高效的电压调节器、设计适当的滤波电路和实施动态电源管理,可以有效提高系统的性能和寿命。同时,使用电源调试工具和编写调试代码,可以帮助开发者及时发现和解决问题。希望本文档能为使用 Arduino Due 的开发者提供有用的信息和指导。

2401_87715305的博客 1310

2.1 amdgpu BO的类型和用途

AMDGPU驱动中,amdgpu_bo_create_user和amdgpu_bo_create_kernel分别用于创建用户空间和内核空间的buffer对象(BO)。用户空间BO支持元数据、tiling flags等属性,由GEM handle管理生命周期;内核BO则用于驱动内部资源如ringbuffer,自动pin并可选CPU映射。二者在返回类型、生命周期管理和使用场景上存在根本差异,前者面向图形渲染/AI等应用,后者服务于驱动内部任务。

图形/计算GPU的驱动与虚拟化技术分享园地 2215

android设置activity全屏 | 无标题

1.设置activity无标题 方法一: 在Manifest.xml中为activity增加属性:  android:theme="@android:style/Theme.NoTitleBar" 方法二: 在activity的onCreate()中加入:requestWindowFeature(Window.FEATURE_NO_TITLE); 2.设置activity全屏

CNnumen 1万+

【华为OD机试真题E卷】514、学生方阵 | 机试真题+思路参考+代码分析(E卷复用)(C++、Java、Py)

【华为OD机试真题E卷】514、学生方阵 | 机试真题+思路参考+代码分析(E卷复用)(C++、Java、Py) 题目描述 学校组织活动,将学生排成一个矩形方阵 请在矩形方阵中找到最大的位置相连的男生数量 这个相连位置在一个直线上,方向可以是水平的,垂直的,成对角线的或者呈反对角线的 注:学生个数不会超过10000

KJ.JK 2494

C#中的无标题栏窗体

所以谓的无标题栏窗体,与标题无关,看边框设置将窗体的FormBorderStyle属性设置为None就可以了,其它的一些属性只是一些显示样式.关于无标题栏窗体的拖动就用傻办法,至少我看到的都是这样的.关于这一方面的介绍不少,我就不在这里缀述了,如果有想要示例的,可以留下邮箱.

fqlove的专栏 1445

锂电池充电器电路设计 里面有电路

锂电池充电器电路设计 里面有电路 3.7V升压到5V电路设计。

计算机控制技术及应用

《计算机控制技术及应用》通过总结作者的科研成果和吸收国内外的先进理论、方法和技术,以计算机控制系统的网络化、开放化、智能化和集成化发展趋势为主线索,主要介绍计算机控制系统的基本概念和计算机控制系统的典型形式,计算机控制系统的数学描述与基本分析方法,以及数字PID控制器、最少拍控制系统、达林算法、状态变量设计法等设计方法及其各种改进算法。重点突出计算机控制系统输入输出通道接口的设计方法和典型控制系统的设计案例与实现方法等。

Android应用设置无标题栏的实现方式

去掉标题栏   第一,在代码中实现; requestWindowFeature(Window.FEATURE_NO_TITLE); 代码要写在setContentView()前。 第二,在xml文件中进行配置; 调用系统自带的样式; 实现全屏效果: android:theme="@android:style/Theme.NoTitleBar.Fullscree

三颗猴面包树 1502

Statistics and Machine Learning Toolbox

Statistics and Machine Learning Toolbox(带书签),MATLAB统计学习工具

【QT学习】如何移动无标题栏窗口?(图文详解)

本篇,作者将分享如何移动无标题栏的窗口。

孤生i的博客 3433

win10 跳过U8环境检测的IE WebControls.rar

win10 安装u8的时候 提示IE WebControls 不通过,这个工具可以欺骗u8的检查。 跳过U8环境检测的IE WebControls。提示导入失败后,重新检测通过。

Labview无标题栏鼠标拖动窗口程序:打造极致简洁交互体验

Labview无标题栏鼠标拖动窗口程序:打造极致简洁交互体验 去发现同类优质开源项目:https://gitcode.com/ 项目介绍 在当今快速发展的软件交互设计中,用户界面(UI)的简洁性和易用性越来越受到重视。Labview 无标题栏鼠标拖动窗口程序正是为了满足这种需求而诞生的一个开源项目。它通过巧妙地调用Windows API函数GetMessagePos,实现了在无标题栏状态下,用户可...

gitblog_06745的博客 1187

delphi技巧——移动无标题窗口

 delphi技巧——移动无标题窗口关键词:移动,消息,无标题                      作者:朱能文   我们都知道windows是通过标题栏来移动窗体的,当我们在标题栏上按下鼠标左键时,windows将发送wM_NCHitTest消息,来告诉系统要移动窗体。但我们在实际编程时,有时为了界面的需要或特殊的要求,窗体没有标题栏,我们必须通过程序来移动窗体。下面我将介

nwen的专栏 1282

使用OnNcHitTest消息实现无标题窗口的移动

<br />使用OnNcHitTest消息<br />实现无标题窗口的移动<br />////////////////////////////////////////////////////////////<br />UINT myWnd::OnNcHitTest(CPoint point)<br />{<br /> // TODO: 在此添加消息处理程序代码和/或调用默认值<br /> // rect 指定,鼠标点在什么地方时,可以移动窗口<br /> // 其实就是把这部分区域当成是 标题栏<br />

WINCOL的专栏 2535

Android 设置无标题栏(全屏)的两种方式

Android开发中,新建一个Activity默认情况会显示Title栏,如下图状态栏下层的应用图标和应用名。为了美观,我们通常会设置Activity无标题来隐藏Tittle栏。                                                                                             设置Activity无标题的方式

ArielYu's Blog 3530

android手机设置无标题后,程序挂掉 解决 (如何用最简短语句设置 手机 全屏无标题)

手机设置无标题后,总是挂掉,最初以为是布局的问题,换了还是不中,然后新建一个工程,发现还是不中!怎么回事?我以前是搞过着的啊,原来设置全屏无标题,这些语句一定要设在setContentView前面!谨记啊! 还是对这些知识不熟悉,所以我写到这,复习下! 设置无标题+全屏: requestWindowFeature(Window.FEATURE_NO_TITLE); int flag = Wi

yanzi1225627的专栏 3033

Delphi 无标题窗体增强功能实现

Delphi 无标题窗体增强功能实现 去发现同类优质开源项目:https://gitcode.com/ 资源简介 本资源提供了一种在 Delphi 开发环境中对无标题窗体(borderstyle=bsnone)进行增强的方法。默认情况下,无标题窗体不显示边框,用户无法通过常规方式移动或调整窗体大小。本资源通过特定的技术手段,为无标题窗体添加了边框,同时实现了窗体的拖拽调整大小和移动位置的功能。 功...

gitblog_06743的博客 433

android ActionBarActivity设置全屏无标题

新建的Activity继承自ActionBarActivity,设置全屏无标题本来很简单的事,但是没想到app竟然无缘无故的挂,要么就是白屏一片,要么就是黑屏。坑了我一个多小时!!! 原因是ActionBarActivity设置theme的时候只能使用v7包里的Theme.AppCompat***开头的主题,因此设置全屏无标题的话需要自定义个style: name="ActionBar

奥特曼超人的博客专栏 2277

移动无标题栏的窗口-java

import java.awt.Point; import java.awt.event.MouseEvent; import java.awt.event.MouseListener; import java.awt.event.MouseMotionListener;

Ymy2011的专栏 592

android 设置为无标题,android无标题全屏的三种设置方式

注意,在设置前把XXX-Activity extends ActionBarActivity 修改成XXX-Activity extends Activity,否则activity无法启动1.在onCreat方法中setContentView()之前插入//设置无标题requestWindowFeature(Window.FEATURE_NO_TITLE);//设置全屏getWindow().s...

weixin_35398679的博客 826
上一篇: ELEC ENG 3110 Electric Power Systems
下一篇: ECE-GY 6183 Real-Time Digital Signal Processing
vx___codinghelp
博客等级 码龄2年 778粉丝 101原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值