AeroSpike之：安装AMC

Install on Red Hat and Centos

AMC是AeroSpike很好用的图形化管理工具。以下是社区版详细安装方法：

现以CentOS6.7系统为例。

安装之前需要确保一下：

Requirements

The installation of the rpm requires the following:

• RedHat/CentOS 6+
• Dual core processor
• 120 MB free hard disk space
• 2 GB RAM (4 GB recommended)
• Port 8081 should be free

1.  Pre-install

   For all editions of the AMC, you will need to make sure the following are installed:

   • python (2.6+)
   • gcc
   • python-devel

   If you are missing any of the above, you can install them by running the command:

   sudo yum install <package>

   • Install pip. You can find the installation instructions at https://pip.pypa.io/en/latest/installing.html当出现command not found时CentOS可直接：$ sudo yum install python-pip，然后直接执行下面5个命令：

   • You should install the following using the pip command: 

     sudo pip install markupsafe
     sudo pip install paramiko
     sudo pip install ecdsa
     sudo pip install pycrypto
     sudo pip install bcrypt

2. Where <package> is the missing package.

3. 2

   Download the rpm file

   The location for the AMC will depend on the edition。

   
   

   wget http://www.aerospike.com/artifacts/aerospike-amc-community/3.6.0/aerospike-amc-community-3.6.0-el5.x86_64.rpm

   weget下载过程截图：

4. 3

   Install the rpm file

   sudo rpm -ivh aerospike-amc-<version>.rpm

Common tasks

There are many common tasks that you may need to do. The following commands work for either edition of the AMC.

Starting the AMC server

To start the AMC（启动amc）:

sudo /etc/init.d/amc start

To stop the AMC server:

sudo /etc/init.d/amc stop

To restart the AMC server:

sudo /etc/init.d/amc restart

To see whether or not the AMC server is up:

sudo /etc/init.d/amc status

Should you have any problem with the AMC, you can check the error logs in /var/log/amc/error.log.

默认配置（gunicorn_config）修改：

cat /etc/amc/config/gunicorn_config.py:

bind = "0.0.0.0:8081"
pidfile = "/tmp/amc.pid"
loglevel = "info"
errorlog = "/var/log/amc/error.log"
workers = 1
proc_name = "amc"
chdir = "/opt/amc/server"
timeout = 150
worker_class = "eventlet"

可以编辑bind之后再重启AMC服务。例如改为：192.168.91.132:8081

以上全部完成后：浏览器登录地址：http://**.**.**.**:8081/，显示如下：

The end~

-----------------------------------------------------------------------------------------------------------------------------------------------

参照连接如下：http://www.aerospike.com/docs/amc/install/linux/el6#1

                           http://www.aerospike.com/docs/amc/user_guide