Spring Cloud Config-Client 无法获取 Config-Server 在 github 上的配置文件的属性值,竟然是因为!!!

本文解析了Spring Cloud Config Server配置中心使用过程中遇到的问题。当配置文件放置于GitHub且未遵循正确的命名规则时,会导致应用程序启动失败。文章详细介绍了正确的配置文件命名方式及访问规则。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

Spring Cloud Config-Server 配置中心 配置文件放在github,配置文件均为bootstrap.yml(bootstrap.yml的优先级级比application.yml高,所以会先去github配置中心获取信息)

运行 Spring Cloud Config-Client 应用程序时,报错信息如下:

java.lang.IllegalArgumentException: Could not resolve placeholder 'from' in value "${from}"
	at org.springframework.util.PropertyPlaceholderHelper.parseStringValue(PropertyPlaceholderHelper.java:172) ~[spring-core-5.0.7.RELEASE.jar:5.0.7.RELEASE]
	at org.springframework.util.PropertyPlaceholderHelper.replacePlaceholders(PropertyPlaceholderHelper.java:124) ~[spring-core-5.0.7.RELEASE.jar:5.0.7.RELEASE]
	at org.springframework.core.env.AbstractPropertyResolver.doResolvePlaceholders(AbstractPropertyResolver.java:237) ~[spring-core-5.0.7.RELEASE.jar:5.0.7.RELEASE]
	at org.springframework.core.env.AbstractPropertyResolver.resolveRequiredPlaceholders(AbstractPropertyResolver.java:211) ~[spring-core-5.0.7.RELEASE.jar:5.0.7.RELEASE]
	at org.springframework.context.support.PropertySourcesPlaceholderConfigurer.lambda$processProperties$0(PropertySourcesPlaceholderConfigurer.java:175) ~[spring-context-5.0.7.RELEASE.jar:5.0.7.RELEASE]
	at org.springframework.beans.factory.support.AbstractBeanFactory.resolveEmbeddedValue(AbstractBeanFactory.java:839) ~[spring-beans-5.0.7.RELEASE.jar:5.0.7.RELEASE]
	at org.springframework.beans.factory.support.DefaultListableBeanFactory.doResolveDependency(DefaultListableBeanFactory.java:1086) ~[spring-beans-5.0.7.RELEASE.jar:5.0.7.RELEASE]
	at org.springframework.beans.factory.support.DefaultListableBeanFactory.resolveDependency(DefaultListableBeanFactory.java:1065) ~[spring-beans-5.0.7.RELEASE.jar:5.0.7.RELEASE]
	at org.springframework.beans.factory.annotation.AutowiredAnnotationBeanPostProcessor$AutowiredFieldElement.inject(AutowiredAnnotationBeanPostProcessor.java:584) ~[spring-beans-5.0.7.RELEASE.jar:5.0.7.RELEASE]
	at org.springframework.beans.factory.annotation.InjectionMetadata.inject(InjectionMetadata.java:91) ~[spring-beans-5.0.7.RELEASE.jar:5.0.7.RELEASE]
	at org.springframework.beans.factory.annotation.AutowiredAnnotationBeanPostProcessor.postProcessPropertyValues(AutowiredAnnotationBeanPostProcessor.java:373) ~[spring-beans-5.0.7.RELEASE.jar:5.0.7.RELEASE]
	... 17 common frames omitted

!!!原因!!!

github上的配置文件的名字构成必须是: {application}-{profile}.properties

仓库中的配置文件会被转换成web接口,访问可以参照以下的规则:

 /{application}/{profile}[/{label}]:

  ~: /{application}-{profile}.yml
  ~: /{label}/{application}-{profile}.yml
  ~: /{application}-{profile}.properties
  ~: /{label}/{application}-{profile}.properties

比如:config-client的配置文件信息如下:

eureka:
  client:
    serviceUrl:
        defaultZone: http://peer1:1122/eureka/
spring:
  application:
    name: config-client
  cloud:
    config:
      uri:  http://localhost:9200/
      label: master
      profile: dev

server:
  port: 9300




那么在github中的配置文件名必须是:config-client-dev.properties;否则程序启动不起来。

00

<think>我们正在解决Spring Cloud Kubernetes中ConfigMap更新后配置不刷新的问题。用户已经配置了`@RefreshScope`和`spring.cloud.kubernetes.reload`相关属性,但未生效。根据引用[2]的信息,2020.*之后的版本中,旧的热更新机制已被废弃,推荐使用Spring Cloud Kubernetes Configuration Watcher组件。因此,我们需要确认: 1. 用户使用的Spring Cloud Kubernetes版本 2. 如果版本>=2020.0.0,则必须安装Configuration Watcher组件 ### 解决方案步骤: #### 1. 确认版本 首先检查项目中使用的`spring-cloud-starter-kubernetes-config`版本。如果版本低于2020.0.0(对应Spring Cloud版本为Hoxton及更早),则旧机制可能有效,但需要检查配置。如果版本>=2020.0.0,则必须安装Configuration Watcher。 #### 2. 安装Configuration Watcher 如果版本>=2020.0.0,按照引用[2]的说明部署Configuration Watcher: - 创建Deployment文件(例如`deployment.yml`): ```yaml apiVersion: apps/v1 kind: Deployment metadata: name: config-watcher spec: replicas: 1 selector: matchLabels: app: config-watcher template: metadata: labels: app: config-watcher spec: containers: - name: watcher image: springcloud/spring-cloud-kubernetes-configuration-watcher:2.1.6 env: - name: SPRING_CLOUD_KUBERNETES_CONFIG_WATCHER_HTTP_PORT value: "8888" # 注意:这个端口是Watcher监听的端口,不是应用端口 - name: SPRING_CLOUD_KUBERNETES_CONFIG_WATCHER_CONFIGLABEL value: "spring.cloud.kubernetes.config" # 默认使用的标签,可自定义 - name: SPRING_CLOUD_KUBERNETES_CONFIG_WATCHER_NAMESPACE value: "default" # 指定要监视的命名空间 ports: - containerPort: 8888 ``` 注意:需要根据实际环境调整命名空间和标签。 - 应用部署: ```bash kubectl apply -f deployment.yml ``` #### 3. 确保应用暴露Actuator端点 在应用的配置中,需要暴露`refresh`端点: ```yaml management: endpoints: web: exposure: include: refresh ``` #### 4. 确保ConfigMap有正确标签 Configuration Watcher默认会监视带有标签`spring.cloud.kubernetes.config: true`的ConfigMap(可通过`SPRING_CLOUD_KUBERNETES_CONFIG_WATCHER_CONFIGLABEL`环境变量自定义)。因此,需要给需要监听的ConfigMap打上相应标签。例如: ```bash kubectl label configmap application-config spring.cloud.kubernetes.config=true ``` #### 5. 验证 更新ConfigMap后,检查Configuration Watcher的日志: ```bash kubectl logs -l app=config-watcher --tail=100 ``` 应该会看到类似以下内容: ``` Detected change in configmap/application-config, triggering refresh ``` 同时,检查应用日志,应该会看到RefreshScope刷新的日志。 ### 版本兼容性说明 - 对于Spring Cloud Kubernetes 2020.0.0及以上版本(如2021.x, 2022.x, 2023.x),必须使用Configuration Watcher。 - 对于旧版本(如1.x),则可以使用原生的`spring.cloud.kubernetes.reload`配置,但需要确保配置正确。 ### 如果仍然不生效 - 检查网络:确保Configuration Watcher可以访问应用的`/actuator/refresh`端点。 - 检查权限:确保Configuration Watcher的ServiceAccount有权限读取ConfigMap和访问应用的服务。 - 检查日志:详细检查Configuration Watcher和应用的日志。 ### 总结 是的,在Spring Cloud Kubernetes 2020.0.0及以上版本中,您需要安装Configuration Watcher组件来实现ConfigMap的自动刷新。旧版本中直接通过`spring.cloud.kubernetes.reload`配置的方式已被废弃。 ### 相关问题 1. 如何为Spring Cloud Kubernetes Configuration Watcher配置多个命名空间? 2. 如何保护`/actuator/refresh`端点避免未授权访问? 3. 如何自定义Configuration Watcher监听ConfigMap的标签? 4. 除了ConfigMap,Secrets的更新如何触发配置刷新? 5. 如何验证Configuration Watcher是否成功监听到ConfigMap变更?</think>### 是否需要安装 Configuration Watcher 组件? **是的,在 Spring Cloud Kubernetes 2020.0.0 及以上版本中,必须安装 Configuration Watcher 组件才能实现 ConfigMap 的自动刷新**。这是新版架构的核心变更,您的配置不生效正是因为缺少此组件[^2]。 --- ### 原因分析 1. **架构变更**: 2020.* 版本后,Spring Cloud Kubernetes 废弃了旧的热更新机制,改用独立的 **Configuration Watcher** 组件监听 ConfigMap 变更并触发刷新[^2]。 2. **工作原理差异**: - 旧版:应用直接监听 ConfigMap(需 `spring.cloud.kubernetes.reload.enabled=true`) - **新版**:由独立 Pod(Configuration Watcher)监听变更 → 调用应用的 `/actuator/refresh` 端点[^2] 3. **您的配置问题**: 虽然设置了 `@RefreshScope` 和 `reload.enabled=true`,但缺少中间组件导致刷新链条断裂。 --- ### 解决方案:部署 Configuration Watcher #### 步骤 1:创建 Deployment ```yaml # config-watcher.yaml apiVersion: apps/v1 kind: Deployment metadata: name: config-watcher spec: replicas: 1 selector: matchLabels: app: config-watcher template: metadata: labels: app: config-watcher spec: containers: - name: watcher image: springcloud/spring-cloud-kubernetes-configuration-watcher:2.1.6 env: - name: SPRING_CLOUD_KUBERNETES_CONFIG_WATCHER_HTTP_PORT value: "8888" # 与应用管理端口一致 - name: SPRING_CLOUD_KUBERNETES_CONFIG_WATCHER_CONFIGLABEL value: "auto-refresh=true" # 自定义监听标签[^1] ports: - containerPort: 8888 ``` #### 步骤 2:部署到集群 ```bash kubectl apply -f config-watcher.yaml ``` #### 步骤 3:标记需要监听的 ConfigMap ```bash kubectl label configmap application-config auto-refresh=true kubectl label configmap sso-config auto-refresh=true # 为所有需要动态刷新的 ConfigMap 添加相同标签 ``` --- ### 关键配置验证 确保应用端满足: ```yaml management: endpoints: web: exposure: include: refresh # 暴露 refresh 端点 ``` --- ### 新旧版本兼容性对照 | 特性 | 2020.0.0 之前版本 | 2020.0.0 及之后版本 | |---------------------|-------------------------------|-------------------------------| | 刷新机制 | 应用直接监听 ConfigMap | 需独立 Configuration Watcher | | 依赖组件 | 无需额外组件 | 必须部署 Watcher Pod | | 配置方式 | `reload.enabled=true` 足够 | 需标签标记 ConfigMap[^1] | | 日志关键词 | `ConfigReloadAutoConfiguration` | `ConfigurationWatcher` | --- ### 验证是否生效 1. **检查 Watcher 日志**: ```bash kubectl logs -l app=config-watcher | grep "Detected change" # 正常输出:Detected change in configmap/application-config ``` 2. **触发更新测试**: ```bash kubectl patch configmap application-config --patch '{"data":{"test.key":"new-value"}}' ``` 3. **观察应用日志**: ```bash kubectl logs your-app-pod | grep RefreshScope # 正常输出:Refreshing Scope 'refresh' ``` --- ### 常见问题排查 若仍不生效,检查: 1. **端口一致性**:Watcher 的 `HTTP_PORT` 需匹配应用的管理端口(默认 8080) 2. **网络策略**:确保 Watcher 可访问应用服务 3. **RBAC 权限**:Watcher 需要 `get/watch configmap` 权限 4. **标签匹配**:ConfigMap 的标签需与 `SPRING_CLOUD_KUBERNETES_CONFIG_WATCHER_CONFIGLABEL` 值一致 > **关键提示**:当使用 `polling` 模式时,仍需 Configuration Watcher 组件,它负责将变更事件转化为 `/actuator/refresh` 调用[^2]。 --- ### 相关问题 1. 如何为多命名空间部署 Configuration Watcher? 2. 如何保护 `/actuator/refresh` 端点避免未授权访问? 3. Secrets 更新如何触发配置刷新? 4. 如何自定义 Configuration Watcher 的监听标签? 5. 如何验证 Configuration Watcher 到应用的网络连通性?
评论 26
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值