Network Infrastructure and Architecture: Designing High-Availability Networks

本书全面介绍高速网络技术和协议,涵盖网络基础设施设计理念、物理传输、网络协议、VLSI芯片及数据交换等内容,并关注市场上新兴技术如MWDM、RPR等。通过案例研究和练习帮助读者理解关键概念。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

版权声明:原创作品,允许转载,转载时请务必以超链接形式标明文章原始出版、作者信息和本声明。否则将追究法律责任。 http://blog.youkuaiyun.com/topmvp - topmvp
A Comprehensive, Thorough Introduction to High-Speed Networking Technologies and Protocols

Network Infrastructure and Architecture: Designing High-Availability Networks takes a unique approach to the subject by covering the ideas underlying networks, the architecture of the network elements, and the implementation of these elements in optical and VLSI technologies. Additionally, it focuses on areas not widely covered in existing books: physical transport and switching, the process and technique of building networking hardware, and new technologies being deployed in the marketplace, such as Metro Wave Division Multiplexing (MWDM), Resilient Packet Rings (RPR), Optical Ethernet, and more.

Divided into five succinct parts, the book covers:
*Optical transmission
*Networking protocols
*VLSI chips
*Data switching
*Networking elements and design

Complete with case studies, examples, and exercises throughout, the book is complemented with chapter goals, summaries, and lists of key points to aid readers in grasping the material presented.

Network Infrastructure and Architecture offers professionals, advanced undergraduates, and graduate students a fresh view on high-speed networking from the physical layer perspective.


http://rapidshare.com/files/119702839/0471749060.zip
资源下载链接为: https://pan.quark.cn/s/9e7ef05254f8 行列式是线性代数的核心概念,在求解线性方程组、分析矩阵特性以及几何计算中都极为关键。本教程将讲解如何用C++实现行列式的计算,重点在于如何输出分数形式的结果。 行列式定义如下:对于n阶方阵A=(a_ij),其行列式由主对角线元素的乘积,按行或列的奇偶性赋予正负号后求和得到,记作det(A)。例如,2×2矩阵的行列式为det(A)=a11×a22-a12×a21,而更高阶矩阵的行列式可通过Laplace展开或Sarrus规则递归计算。 在C++中实现行列式计算时,首先需定义矩阵类或结构体,用二维数组存储矩阵元素,并实现初始化、加法、乘法、转置等操作。为支持分数形式输出,需引入分数类,包含分子和分母两个整数,并提供与整数、浮点数的转换以及加、减、乘、除等运算。C++中可借助std::pair表示分数,或自定义结构体并重载运算符。 计算行列式的函数实现上,3×3及以下矩阵可直接按定义计算,更大矩阵可采用Laplace展开或高斯 - 约旦消元法。Laplace展开是沿某行或列展开,将矩阵分解为多个小矩阵的行列式乘积,再递归计算。在处理分数输出时,需注意避免无限循环和除零错误,如在分数运算前先约简,确保分子分母互质,且所有计算基于整数进行,最后再转为浮点数,以避免浮点数误差。 为提升代码可读性和可维护性,建议采用面向对象编程,将矩阵类和分数类封装,每个类有明确功能和接口,便于后续扩展如矩阵求逆、计算特征值等功能。 总结C++实现行列式计算的关键步骤:一是定义矩阵类和分数类;二是实现矩阵基本操作;三是设计行列式计算函数;四是用分数类处理精确计算;五是编写测试用例验证程序正确性。通过这些步骤,可构建一个高效准确的行列式计算程序,支持分数形式计算,为C++编程和线性代数应用奠定基础。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值