优快云 Windows专区网络版版主测试题目

【Boost5】Boost变换器的输入电容 节点的电流有3个,一个是来自电源输入的,由于我们把Vin看成理想电源以及线路的电感的存在,它可以近似看作是恒定的电流源Iin,一个是流向输入电容Cin的电流Icin,另外一个节点是电感L电流IL。电容电流波形在整个开关周期内的平均值为0,充电和放电在一个周期中各占1/2,在图中充电部分面积和放电部分面积相等,那么在充电或放电的电荷量Q=I*t,从图中可以看出,在一个周期内电容电流变化量是ΔIL,那在电容在充电1/2T周期中电流的变化量是1/2ΔIL。输入电容上的ESR也会随着电流变化,影响输入电压的变化。 阅读详情

1、You are the administrator of a Windows 2000 network. You install Windows 2000 Professional on a new computer and configure the TCP/IP settings to have a static IP address. While testing network connectivity from the new computer, you discover an error in the DNS server address that is configured in the TCP/IP settings. You configure the correct DNS server address, which is 10.1.1.5. However, you are still unable to successfully connect to network resources by name. You run the IPconfig/all command. The results indicate that the DNS server address is now configured as 0.0.0.0

You need to ensure that the computer can connect to network resources by name. What should you do?

A. Stop and restart the DNS Client service.
B. Add 10.1.1.5 to the DNS server list on the TCP/IP Advanced Properties tab.
C. Add an A (host) record for the computer to the DNS server’s zone file.
D. Configure your DHCP server to have a DNS server address of 10.1.1.5.

 

===========================================================================
2、Which three are examples of the functions of connection oriented services? (Choose three)

A. Connection parameters are synchronized.
B. Any loss or duplication of packets can be corrected.
C. The data packet is independently routed and the service does not guarantee the packet will be processed in order.
D. A data communication path is established between the requesting entity and the peer device on the remote end system.

 

===========================================================================
3、You install Windows 2000 Professional on your computer at home. You create a new dial-up connection to connect to your company's remote access server. You configure the connection to use both of your external modems and to use Multilink to bind the modems together. You start the dial-up connection to connect to the remote access server. You notice that only one of the modems is connected to the remote access server.

What should you do?

A. Configure the dial-up connection to use a SLIP connection.
B. Configure the company's remote access server to accept Multilink connections.
C. Replace your modems with new modems that support Multilink.
D. Grant your user account Multilink permission on the company's remote access server.

 

===========================================================================
4、You are creating a shared Internet connection on your Windows 2000 Professional computer. You want to enable other computers on the LAN to be able to access only HTTP and FTP sites on the Internet.

What should you do? (Choose all that apply)

A. Configure your shared Internet connection to disable LCP extensions.
B. Configure your shared Internet connection to disable on-demand dialing.
C. Create an Internet Connection Sharing application type for HTTP to use remote server for port 25.
D. Create an Internet Connection Sharing application type for HTTP to use remote server port 80.
E. Create the Internet Connection Sharing application type for FTP to use remote server port 21.
F. Create an Internet Connection Sharing application type for FTP to use remote server port 72.

 

===========================================================================
5、Which of the following are reasons to use VLANs? (Choose three.)

A. They increase the size of collision domains.
B. They allow logical grouping of users by function.
C. They enhance network security.
D. They increase the size of broadcast domains while decreasing the number of broadcast domains.
E. They increase the number of broadcasts domain while decreasing their size.
F. The simplify switch administration.

 

===========================================================================
6、The network at Testing Ltd. consists of one Windows NT Server 4.0 domain and 35 Windows 2000 Professional computers. The Testing network consists of five interconnected TCP/IP subnets. All of the computers use TCP/IP as the only network protocol. You are adding 15 Windows 2000 Professional computers to the network. You want to enable the Windows 2000 Professional computers to resolve NetBIOS names to TCP/IP addresses.

What should you do?

A. Install a DHCP server. Configure each computer to use DHCP.
B. Install a WINS server. Configure each computer to use WINS.
C. Create a Lmhosts.sam file on each computer. Add an entry containing the TCP/IP address and NetBIOS name for each computer on the network.
D. Create a Hosts.sam file on each computer. Add an entry containing the TCP/IP address and NetBIOS name for each computer on the network.

 

===========================================================================
7、Your routed TCP/IP network consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. Your network uses TCP/IP as the only network protocol. You are installing 10 new Windows 2000 Professional computers. You want to enable the new computers to use NetBIOS names to connect to all shared resources as the network. You configure a TCP/IP address and a subnet mask on each new computer.

Which 2 additional TCP/IP properties should you configure on each new computer? (Choose two)

A. The bindings.
B. A DNS address.
C. A Gateway address.
D. A WINS server address.
E. A DHCP server address.

 

===========================================================================
8、Spanning-Tree was originally developed by DEC. What is the reason Spanning-Tree is used in a switched LAN?

A. To provide a mechanism for network monitoring in switched environments.
B. To prevent routing loops in networks with redundant paths.
C. To prevent routing switching loops in networks with redundant switched paths.
D. To manage, the addition, deletion, and naming of VLANs across multiple switches.
E. To segment a network into multiple collision domains.

 

===========================================================================
9、Switches have three primary modes to handle frame switching. Which one of these modes looks at the destination address and then immediately forwards the frame to the destination?

A. CSMA/CD
B. FULL DUPLEX
C. CUT THROUGH
D. HALF DUPLEX
E. FRAGMENTATION
F. STORE AND FORWARD


===========================================================================
10、Which of the following correctly identifies switched and routed data flow?

A. Switches create a single collision domain and a single broadcast domain. Routers provide separate broadcast domains.
B. Switches create separate collision domains but a single broadcast domain. Routers provide separate broadcast domains.
C. Switches create a single collision domain and a separate broadcast domain. Router provides a separate broadcast domain as well.
D. Switches create separate collision domains and separate broadcast domains. Routers provide separate collision domains.

 

===========================================================================
11. You are the network administrator for your company. You have two offices, one in Denver and one in Houston. Management wants to create a secure VPN connection between the two offices to facilitate transfer of information between locations. It is suggested that you use the most current VPN protocols that Windows 2000 provides and avoid using the proprietary PPTP. When you set up the VPN, which protocol will be used to secure the information traveling across the link?

A. PPP
B. L2TP
C. MS-CHAPv2
D. IPSec

 

===========================================================================
12、You have a group of four servers running the same applications on your Windows 2000 network. The servers each have separate IP addresses but a common logical name. What method does DNS use for forwarding requests to such an application server setup, either with round-robin name resolution or by prioritized list?

A. Cluster load balancing
B. Server clustering
C. DNS load balancing
D. Recursive forward lookup

 

===========================================================================
13、You are the network administrator for your company. Currently, you are setting up a secure intranet for users on the network. It will contain public information, such as phone lists and company-wide memos. Users will also be able to access an electronic time clock and access their 401(k) information from their machines. Of course, security is a concern. You decide to implement certificates. Management wants to make sure that no one will be able to hack the security and that users
will only be able to access their own information. You are to give a presentation on the benefits of using a certificate authority (CA).

What cryptographic methodology does this service use?

A. PGP
B. symmetric key encryption
C. PKI
D. MS-CHAP

 

===========================================================================
14、You are the network administrator for Testing. The network consists of a single Active Directory domain testing.com. All domain controllers have the DNS service installed. You configure a new UNIX server to act as a secondary DNS server that is authoritative for the DNS zone. You create a host (A) record for the UNIX server in the DNS zone. You configure the DNS zone to allow zone transfers to all servers.

You need to configure the DNS zone to accommodate the new UNIX server. What should you do?

A. Add a name server (NS) resource record for the UNIX server to the DNS zone.
B. Add the UNIX server to the start of authority (SOA) resource record for the DNS zone.
C. Add a global service locator (SRV) resource record that includes the UNIX server as a host.
D. Add a LDAP service locator (SRV) resource record that includes the UNIX server as a host.

 

===========================================================================
15、列举关于版主的在社区的权利、义务(六点)

 


===========================================================================
16、以下有关删除帖子的陈述,不完整或错误的是哪些

A、如果帖子没人回复、或者只有帖主回复过,帖主可以删除帖子,不扣信誉分,返回帖主可用分;
B、如果帖子有其他帐号回复过,帖主不允许删除帖子;
C、版主有权删除本版帖子,删除一个帖子,扣除帖主信誉分3分,返回帖主可用分;
D、如果帖子已经结帖,扣除该帖子得分人的得分,返回帖主可用分;
E、版主删除自己的帖子不扣信誉分;

 

===========================================================================
17、以下关于专家分减少表述错误的是哪些

A、您得分的帖子被删除;
B、您得分的帖子向非技术区移动;
C、在大类版块内被封杀。
D、被网管发现倒专家分,直接扣除;



Trackback: http://tb.blog.youkuaiyun.com/TrackBack.aspx?PostId=144014


MATLAB App Designer 实现多窗口交互与数据传递实战 本文详细介绍了如何使用MATLAB App Designer实现多窗口交互与数据传递的实战技巧。从基础的多窗口应用设计到高级的动态窗口创建,涵盖了窗口调用控制、数据传递方法、状态管理及用户体验优化等核心内容,帮助开发者高效构建复杂的MATLAB GUI应用。 阅读详情

相关推荐

【学习记录】IIC驱动ICM42670+卡尔曼滤波+四元数姿态角解算

ICM42670陀螺仪可以使用iic驱动,单片机平台使用GD32f305VE。

liarsup的博客 8271

DHCP小实验2

3、ip pool是根据接口的地址段自动匹配的,你可以再做一个vlan20的地址池去匹配另外接口。[DHCP-Vlanif10]dhcp select interface //报错提示如下。2、交换机的物理interface没法配置IP,因此DHCP是做在vlanif接口里面的。1、当配置有vlanif接口的ip pool,系统无法生成相同地址的接口IP pool。

u013434525的博客 2741

手把手教你用ADS仿真FMMT417雪崩三极管,搞定射频脉冲源设计

本文详细介绍了如何使用ADS仿真工具设计基于FMMT417雪崩三极管的射频脉冲源。从器件选型、SPICE模型导入到电路设计与优化,提供了一套完整的实操方案,特别适合射频脉冲设计的初学者。通过级联设计和实测验证,帮助工程师快速掌握雪崩电路的应用技巧,提升射频脉冲源的设计效率。

weixin_30905981的博客 491

全局地址池DHCP

知识点: 1、DHCP地址池可分配506个 配置: ip pool huawei2 全局地址池名称 gateway-list 192.168.2.254 配置对应接口网关 network 192.168.2.0 mask 255.255.255.0 分配地址范围 excluded-ip-address 192.168.2.250 192.168.2.253 排除不分配的地址 lease day 2 地址租期 dns-list 8.8.8.8 114.114.114.114 配置

weixin_48673257的博客 2611

能量机关 STM32HAL库开发大疆A板WS2812B彩灯(PWM+DMA)

本文主要目的是为了制作RoboMaster比赛能量机关的灯条控制,模拟比赛场中大符,搭建出类似场地道具,以供视觉测试 使用的是RoboMaster开发板A型,芯片为STM32F427IIH6,使用的灯条为WS2812B。 采用PWM+DMA控制,使用CUBEMX配置底层,keil5编辑烧录代码 实现:一共五片扇叶,每片扇叶均实现流水灯+常亮颜色 参考文章在后面会标记出来

m0_51756449的博客 4294

鸿蒙OS开机动画背后的秘密:从代码到视觉的完整解析(附源码分析)

本文深入解析了鸿蒙OS开机动画的系统级实现原理。从bootanimation服务的启动配置、与Render Service的协同,到基于VSync信号的帧率同步与绘制流水线,结合OpenHarmony源码进行了逐行解读。文章揭示了其事件驱动的优雅退出机制,并探讨了视频支持、多屏适配等高级特性与定制化可能,为开发者理解鸿蒙图形子系统提供了硬核技术视角。

sony5的博客 976

最简单的eNSP模拟AC+AP无线接入使用10条命令实现

用最少的命令,实现eNSP模拟AC+AP的无线访问接入实验。

arlene210的专栏 3486

2026滑块验证码终极实战:缺口检测算法+人机轨迹模拟,识别率从60%飙升至95%全方案

**摘要:2026年AIGC技术发展导致传统验证码失效,滑块验证码成为主流防护手段。本文深入分析了传统方案识别率低的原因,并提出多级检测融合和行为拟合优化方案。通过图像预处理优化、三级缺口检测引擎(差分图像法、Hu矩轮廓匹配、YOLOv8n模型兜底)将识别率提升至99.2%。同时针对轨迹模拟环节,设计了包含抖动特征、时间随机性和个体差异的行为模型,使通过率从12%提升至87%。该方案解决了传统方法在缺口定位精度和轨迹真实性方面的核心痛点,为应对新一代验证码风控提供了完整的技术框架。

专注于Python爬虫开发,分享爬虫技巧、项目实战与反爬经验,使用Scrapy、BeautifulSoup等工具,解决数据抓取难题。 1903

【无标题】

【代码】【无标题】

face_ib的博客 614

恒玄BES调试笔记-BES2500如何Dump Anc Audio数据

从YP的4M flash改HP3的2M flash只需要改: 原工程:target.mk的export FLASH_SIZE ?= 0x200000和common.mk里的KBUILD_CPPFLAGS += -DNEW_IMAGE_FLASH_OFFSET=0x100000 OTA工程:target.mk的NEW_IMAGE_FLASH_OFFSET ?= 0x100000和FLASH_SIZE ?= 0x200000 ...

leezs的博客 1673

手把手教你学Simulink——基于经典滤波器设计的场景:低通滤波器(LPF)的设计与频率响应仿真

滤波器是信号处理领域中非常重要的组件,用于去除不需要的频率成分或者提取有用的频率信息。低通滤波器(Low-Pass Filter, LPF)允许低于某个特定截止频率的信号通过,同时衰减高于该截止频率的信号。在本教程中,我们将学习如何使用设计一个简单的模拟低通滤波器,并对其频率响应进行仿真分析。本文介绍了如何使用设计一个简单的模拟低通滤波器,并通过仿真展示了其应用效果。通过这样的实践,您不仅能够加深对滤波器工作原理的理解,还能掌握利用Simulink进行滤波器设计与仿真的基本技能。

MHD0815的博客 5724

关于在地址池下绑定IP时报错The IP address's status is error解决方法

我使用华为交换机为一家企业里电脑绑定IP地址时报:The IP address's status is error的错误。如下图: 这时我觉得可能这个IP地址已经被DHCP服务给分配到下面电脑了,于是我查了一下华为官方资料,找到一条释放IP命令如下: 这条命令即可以释放单独的IP,也可以释放所有IP,我再回到地址池中绑定IP成功。如下图: 最后保存,退出。...

weixin_34198881的博客 1万+

2025.06.18【转录组】|Ribo-seq/small RNA数据分析:rRNA和smRNA比对率统计全流程

本文介绍了一种自动化统计rRNA/smRNA比对率的方法,用于评估Ribo-seq或small RNA测序数据的质量。主要内容包括:分析原理(比对率定义、参考序列来源)、实践流程(构建索引、比对统计)以及结果可视化方法。通过Python和R脚本实现自动化处理,可生成汇总表格和柱状图。比对率结果能反映样品污染程度,建议控制在20%以下。该流程有助于快速评估测序质量,为后续分析提供可靠依据。文中还提供了常见问题解决方案和脚本示例,适用于生物信息学标准化质控环节。

1619

优快云 Windows专区网络版版主测试题目答案

1、AExplanation: In this scenario the client computer does not have the correct information in its local DNS cache.There are two ways to solve this problem. You could use ipconfig /flushdns to reset th

Aceryt 2294

迈瑞BS系列全自动生化分析仪LIS协议接口手册(内含HL7和ASTM)

迈瑞BS系列全自动生化分析仪LIS协议接口手册,内含HL7和ASTM)

Outlook Express 6 (OE6) for Win7/Win8/Win10

英文版 Outlook Express6.0, 兼容Win7/Win10/WinXP,解压就可用。

上一篇: Windows 98 第二版的关机问题
下一篇: 优快云 Windows专区网络版版主测试题目答案
techweb
博客等级 码龄19年 226粉丝 3842原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值