Smartq7 NFS boot Android.

最新推荐文章于 2021-05-29 03:53:14 发布

原创最新推荐文章于 2021-05-29 03:53:14 发布 · 994 阅读

0 ·

CC 4.0 BY-SA版权

文章标签：

#network #linux #command #tcp

我的SmartQ7 MID 专栏收录该内容

15 篇文章

订阅专栏

本文介绍了一种通过不同USB以太网适配器实现设备通过NFS启动的方法。起初尝试的JP-108 USB以太网适配器启动速度过慢，而采用基于ASIX AX88772芯片的RVL-015 USB 2.0以太网适配器及Linksys USB200M适配器则成功实现了快速启动。文中还提到了Linux内核配置中针对ASIX AX88772芯片驱动的位置。

I first used a JP-108 usb lan adapter (a dm9601 compartiable one), but the device boots very slow through nfs even I enabled the tcp command in the linux kernel commmand line.

Then I tried two USB 2.0 lan adapters, RVL-015 USB 2.0 Lan adapter and Linksys USB200M USB2.0 Network adpater, both using the asix AX88772 chip, and the device can boot through nfs successfully.

The driver for the AX88772 chip is located in the fowllowing linux kernel config:

Device Drivers -> Network device support -> USB Lan Adapters -> ASIX AX88xxx based 2.0 Ethernet Adapters

Besides the usb land adapter, I also got a TEVION 4 ports Usb 2.0 Hub which is supporting the out side power. So that I can use an usb keyboard as well at the same time using the usb lan adapter.