stevenliyong 的专栏

SmartQ7 Mer操作系统上 安装wifi 驱动   To get wireless networking to work (from https://wiki.ubuntu.com/Marvell8686Firmware):1. Grab the firmware package from Marvell here: http://www.marvell.com/drivers/

 1. 修改 build/target/board/generic/BoardConfig.mk定义使用 wireless extension 作为wpa_supplicant 的driver.# Wifi related definesBOARD_WPA_SUPPLICANT_DRIVER := WEXT 2.  修改hardware/libhardware_legacy/wifi/

1. Setup GIT1.1# sudo vim /etc/hostsAdd line: 192.168.0.243 my-git-server 1.2# git config --global user.name "steven" # git config --global user.email "steven.liyong@gmail.com"# git

 1.I first used a JP-108 usb lan adapter (a dm9601 compartiable one), but the device boots very slow through nfs even I enabled the tcp command in the linux kernel commmand line. Then I tried 

Andorid Supporting Multiple Screenshttp://d.android.com/guide/practices/screens_support.html In this document, we can see, 1. Android sizedensity configurations Android 1.5 and earlier v

smartq7 是 7 寸屏幕 ，800 * 480 分辨率 计算出来  dpi 是 133在 init.rc 添加 setprop ro.sf.lcd_density 133 wom， Android的显示 完美了 ！

1. Terminal 1#export ADB_TRACE=adb#export ADBHOST=192.168.0.200#export PATH=$PATH:#adb nodaemon server 2. Terminal 2#export ADBHOST=192.168.0.200#export PATH=$PATH:#adb shell

SmartQ7 如何使用JP108  USB网卡（买亏了，贪便宜，是个山寨货） I have a SmartQ7, and I bought this JP108 from Taobao website. Unfortunately, it is not recognized both by my linux host Ubuntu8.04 and SmartQ7 device at

I got them from the android-group-korea  http://code.google.com/p/android-group-korea/downloads/list  Kandroid Toolchain  ver 1.1.2.1 (May 30, 2008)------------------------------------------

 1. Add kernel param to menu.list console=tty0   2.compile the android kernel. CONFIG_FRAMEBUFFER_CONSOLE=y#CONFIG_LOGO  is not setCONFIG_CMDLINE="console=tty0"

1. arm-eabi-gcc information in androidstevenliyong@stevenliyong-desktop:~/smartq_utility/linux-kernel-2.6.24.7-smartq$ arm-eabi-gcc -vUsing built-in specs.Target: arm-eabiConfigured with: ../.

 http://www.jiongtang.com/blog/html/smartq5/boot-the-smartq-5-from-sd-card.html roberto from spain has made a modified Qi bootloader for the SmartQ 5 MID that can boot from the external SD car

SmartQ7 wifi突然不工作了，一直显示找不到网络。重新刷固件还是没用。基本放弃，怀疑硬件坏了，都准备返厂了...偶然的一次尝试，现在修复了。过程如下：进入Unbutu 系统，登陆控制台后#sudo su#rmmod -f sd8686#halt重启后，wifi可以工作了。怀疑是因为我前面一直非正常关机的缘故。PS:这东西太烂了

安装下列apk. SetupWizard.apk (required to bind a Google account to the Android emulator)gtalkservice.apk (Gtalk service)Talk.apk (GTalk app)Vending.apk (Market)   从G1手机中将 /system/app/*.apk 拷贝到q7

将下面这段话加到 init.rc  # mount mtd partitions 段的最后  mount vfat /dev/block/mmcblk1p1 /sdcardchown system system /sdcardchmod 0777 /sdcardsetprop EXTERNAL_STORAGE_STATE mounted  

 偶然间发现了这个patch. http://code.google.com/p/android-x86/downloads/detail?name=0001-merge-ethernet-support-to-eclair.patch  这应该是 android-x86 项目，针对上网本的一个功能扩展。  但是如果这个功能应该对开发也有帮助， 可以通过 eth