Cellular Emulator in WM SDK6.0_cellular emulator下载-优快云博客

本文链接：https://blog.youkuaiyun.com/sooner01/article/details/4350776

本文介绍如何利用Cellular Emulator和设备模拟器进行电话拨打及短信发送的操作步骤。通过设置串口映射并软重启模拟器，可以在模拟环境中实现基本的通讯功能。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

With the Cellular Emulator provides we can make phone call can send SMS with the device emulator.
Here is the steps to use:
1, Launch the Cellular Emulator (Start/All Programs / Windows Mobile 6 SDK / Tools / Cellular Emulator ) and the Device Emulator.
2, Read the COM port configuration from the status bar of the Cellular Emulator main window.
3, In the Device Emulator, go to File / Configure and select the Peripherals tab.
4, Map the Serial port 0 of Device Emulator to the specific COM number obtained from step 2
5, Soft reset the Device Emulator (File / Reset / Soft).

then you mey dial and send SMS between the Emulators.

by the way, the phone nomber in the is always ‘35638’,
This is by design. ‘35638’ stands for ‘FKNET’, short for ‘Fake Network’.

error shooting:

when the emulator is started, an error may happen with message“could not read save-state file”

That’s because the save-state file is not properly saved, just clear the save-state by dvcemumanager.exe. You may also delete the save-state file which locates in application data folder.

D:/Documents and Settings/Administrator/Application Data/Microsoft/Device Emulator