Boke光纤交换机的snmp配置

最新推荐文章于 2024-07-31 08:23:16 发布

原创最新推荐文章于 2024-07-31 08:23:16 发布 · 5.2k 阅读

1 ·

CC 4.0 BY-SA版权

文章标签：

#测试 #c

本文介绍了如何配置Boke光纤交换机e-300的SNMP Trap，主要使用snmpconfig命令设置了snmpv1，并提供了测试陷阱发送的步骤。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

今天我配置了一下Boke光纤交换机e-300的snmp trap的配置

　敲击help命令你会发现配置snmp的命令共有四个

snmpconfig                      Configure SNMP
snmpmibcapset              Set options for configuring SNMP Mib/Trap Capability
snmpmibcapshow          Show SNMP Mib/Trap Configuration
snmptraps                       Configure SNMP traps

我这里只需要配置trap事件，故只需要使用一个命令就是snmpconfig这个命令，这个命令的格式如下

我这里设置snmpv1版

＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝

swd77:admin> snmpconfig --set snmpv1

SNMP community and trap recipient configuration:
Community (rw): [Secret C0de] public
Trap Recipient's IP address : [0.0.0.0] 10.0.1.83
Trap recipient Severity level : (0..5) [0] 0
Trap recipient Port : (0..65535) [162]
Community (rw): [OrigEquipMfr] public
Trap Recipient's IP address : [0.0.0.0] 10.0.1.83
Trap recipient Severity level : (0..5) [0]
Trap recipient Port : (0..65535) [162]
Community (rw): [private] public
Trap Recipient's IP address : [0.0.0.0] 10.0.1.83
Trap recipient Severity level : (0..5) [0]
Trap recipient Port : (0..65535) [162]
Community (ro): [public] public
Trap Recipient's IP address : [0.0.0.0] 10.0.1.83
Trap recipient Severity level : (0..5) [0]
Trap recipient Port : (0..65535) [162]
Community (ro): [common] public
Trap Recipient's IP address : [0.0.0.0] 10.0.1.83
Trap recipient Severity level : (0..5) [0]
Trap recipient Port : (0..65535) [162]
Community (ro): [FibreChannel] public
Trap Recipient's IP address : [0.0.0.0] 10.0.1.83
Trap recipient Severity level : (0..5) [0]
Trap recipient Port : (0..65535) [162]
Committing configuration.....done.
＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝