iTunesMobileDevice备忘

最新推荐文章于 2021-07-06 06:11:19 发布

wecode66

最新推荐文章于 2021-07-06 06:11:19 发布

阅读量1.3k

点赞数

CC 4.0 BY-SA版权

本文链接：https://blog.youkuaiyun.com/sepnineth/article/details/77509196

本文介绍如何在iOS设备的刷机、恢复及DFU模式下通过特定API获取设备硬件信息，如ECID、BoardID等，并注册通知以捕获设备连接状态。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

1、设备刷机后未激活状态，是可以通过AMDeviceNotificationSubscribe函数注册的回调函数中的am_device参数，来获取设备信息的

2、在dfu & recovery模式，有一批函数可以获取设备硬件信息，比如：

typedef unsigned long long (__cdecl *fpAMRecoveryModeDeviceGetECID)(am_recovery_device *dev);
typedef unsigned long (__cdecl *fpAMRecoveryModeDeviceGetBoardID)(am_recovery_device *dev);
typedef unsigned long (__cdecl *fpAMRecoveryModeDeviceGetChipID)(am_recovery_device *dev);

typedef unsigned long long (__cdecl *fpAMDFUModeDeviceGetECID)(am_recovery_device *dev);
typedef unsigned long (__cdecl *fpAMDFUModeDeviceGetBoardID)(am_recovery_device *dev);
typedef unsigned long (__cdecl *fpAMDFUModeDeviceGetLocationID)(am_recovery_device *dev);
typedef unsigned long (__cdecl *fpAMDFUModeDeviceGetProductID)(am_recovery_device *dev);
typedef unsigned long (__cdecl *fpAMDFUModeDeviceGetChipID)(am_recovery_device *dev);

3、从am_device中可以通过以下函数获取到恢复模式的结构am_recovery_device：

typedef am_recovery_device* (__cdecl *fpAMRestorableDeviceCopyDFUModeDevice)(am_device* device);
typedef am_recovery_device* (__cdecl *fpAMRestorableDeviceCopyRecoveryModeDevice)(am_device* device);
typedef am_recovery_device* (__cdecl *fpAMRestorableDeviceCopyRestoreModeDevice)(am_device* device);

4、AMRestorableDeviceRegisterForNotifications也可以注册刷机模式的回调，可以正常补回各种设备连接信号