RK29-31全系列均适用的开机LOGO第一屏替换教 ...

本文详细介绍如何使用RK开机LOGO替换器及GIMP软件,将自定义的开机LOGO图片转换为PPM格式,并成功替换设备启动时显示的LOGO。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

哈哈,这是我第一次在论坛发技术贴,昨晚@灬破芴荨,童鞋说那开LOGO替换很多亲有意思,我就总结一下,开机LOGO替换并不难··但是没有这种方法换也很难琢磨得出来哦好屌丝们我们开始吧
我们首先要准备的是 
1.【881】RK开机LOGO替换器:
下载地址:http://pan.baidu.com/share/link?shareid=445192&uk=1093590690

2.RK唯一支持PPM图片格式转换的 GIMP:
下载地址:http://netxia.cn/forum.php?mod=viewthread&tid=22230&highlight=PPM

3.没了...................................................

我们打开我们的开机LOGO替换器:


我们点‘文件’,然后会出现两个选项比如:‘PNM图片’‘选择Kernel.img’ 我们点‘选择Kernel.img’,然后导出内核Kernel.img(可以通过固件解包程序获得)


我导好了内核了,这里需要我们提供密码(默认密码为rkdroid)小声点别让人知道密码..Haa

4.jpg 
输入我们的密码..............然后确定
5.jpg 
打开了,看到信息没有 内核文件为:1024*768(我用的是N80四核RK的内核来讲的)最大能替换的分辨率也是1024*768,这里具体的分辨率根据机型的不同分辨率也不同,你看看那里说的分辨率就知道了
接下来我们把这个搁到一边
我们的开机LOGO,RK的开机LOGO是PPM格式的,而且只能用GIMP这款软件转换图片为PPM格式才能成功替换,下载了我刚才提供的地址里的GIMP,然后进行安装.............然后打开··这个软件打开稍慢··耐心的哈··打开了
6.jpg 
在 GNU图像处理程序那里 -点击‘文件’-‘打开’-选择图片

我选择的图片是 LOGO.png(当然你的命名是你自己定的哈...),点好后‘打开’
8.jpg 
打开了...............然后我们选择色彩度(RK默认最高是224...)
色彩度选择是:图像-模式-牵引-下图:
9.jpg 
在 生成优化色斑那里 我们把 最大颜色数量调整至224
10.jpg 
然后点击‘转换’····OK了,成功转换色彩度
弄好后我们转换为PPM格式...............
文件-另存为:
13.jpg 
点击那些 + 号跳出高级选项
我选择另存到:D 盘去,那个图像格式点击文件类型中选择PPM

然后‘保存’
14.jpg 
然后跳出个浮动窗口 默认是‘原始’我们必须调到‘Ascli’才能识别出是RK的开机LOGO,如图,选好后‘保存’
好了完成了PPM格式转换看看我存放在D盘的开机LOGO
0000.jpg 
现在把我们搁在一旁的开机LOGO替换器 弄出来
15.jpg 
【文件】-【打开PNM图片】-导出自己转换的PPM(比如我存放在D盘的刚才那个)
17.jpg 
成功打开了...........................
点击‘图片替换’
18.jpg 
好了 写明了 替换成功 我们关闭它,然后用你替换过的这个内核打包成固件,享受一下自己的劳动成功吧呵呵,

开机LOGO也可以用photoshop之类的软件,然后再用GIMP转换哈哈

写到这里我要回学校了,祝各位成功
RK固件小组: 178683791

7.jpg (76.04 KB, 下载次数: 0)

7.jpg

11.jpg (23.97 KB, 下载次数: 0)

11.jpg

12.jpg (79.18 KB, 下载次数: 0)

12.jpg

16.jpg (58.65 KB, 下载次数: 0)

16.jpg

非常威猛的官方固件UPDATE.APP解包打包工具(转自XDA论坛) Huawei Update Extractor After messing around a bit with the perl tools available for extracting Huawei update.app files, i got the idea to create an own (windows) tool. Requirements .Net Framework 3.5 Install Extract the content of the zip to a folder somewhere on your system. Execute HuaweiUpdateExtractor.exe I'm planning to create an installer sometime. Usage Press the browse (...) button and select an update.app file. Select a device or unknown and press on the open button. You'll see the content of the update.app file in the listview. Select one or more files and right click. Choose Extract selected from the context menu. Choose the ouput folder and press ok. Or just right click on the list and select Extract all, choose the output folder again and press ok. Press close on the extract window. You can sort the list on sequence, filename and size. Just press on the desired column header. Command line: HuaweiUpdateExtractor extract input output [profile] HuaweiUpdateExtractor repack input output profile Profile The profiles.xml file is used to identify the files in the update.app file. Every file in the update.app has a sequence or type, which is also shown in the list. Those sequences or types are used to identify the file/device partition. Example: system.img recovery.img baseband.img version.txt splash.raw565 boot.img cust.img userdata.img signature crc system.img cache.img cust.img userdata.img modemimage.img boot.img recovery.img signature crc - Root tag of the xml file. - Identifies a device - attribute name: name of the device - attribute author: author of the device - File root tag - Identifies a file - attribute sequence: sequence of the file in update.app - attribute type: type of the file in the update.app - attribute partition: destination partition on the device - attribute signature: used to identify the signature file - attribute checksum: used to identify the checksum file - value: file name You can add or edit devices. If you want them to integrate in newer version, pm 'em to me. I'm gonna make some auto update for the device file somewhere in the future Roadmap - You tell me ... Credits ZeBadger (zebadger@hotmail.com) for figuring out the file headers S34Qu4K3 for the P6 partition layout ngamyarthar for adding ALOT of devices! Changelog
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值