challenged 的一个项目

最新推荐文章于 2022-11-08 14:33:16 发布

原创最新推荐文章于 2022-11-08 14:33:16 发布 · 1.2k 阅读

CC 4.0 BY-SA版权

文章标签：

#spreadsheet #graph #parameters #application #processing

以前用英文版活图（中文版活图ver8.1现在是常州微识自动化科技有限公司产品之一http://www.microverify.com/col.jsp?id=114）单独参加挑战的一个项目（大概是根据原始探井数据，以三维方式灵活表现各组断层线），虽然对方评估了接近一年的时间最后决定不采用，但解决问题的这种思路是正确的，参考。

Explains:
About the challenger1.jpg:
This is the data spreadsheet from the oringinal example, no limit to the data cells both row and column in this spreadsheet.

challenge1.jpg

About the challenger2.jpg:
Because the oringinal data's x and y coordinates are a little big, for easy drawing the lines I displaced the reference point by changing each original data group's x and y coordinate values to a new point while keep the depth values the same,that is to each data group's x coordinates minus value 620000, and to each data group's y coordinates minus value 550000,this is the resulted data spreadsheet.

challenge2.jpg

About the challenger3.jpg:
I made a special application to process the data,this is the resulted interface (by using the data processing software Vividgraph).There are 12 parameters in this application,the first and the second parameters are the graph's drawing base coordinates; parameters 4,5 and 6 are three 3-d rotate angles,they are the vertical rotate angle, level rotate angle and face rotate angle for the graph to view; parameter 7 is the numbers of the data groups,for example,in this spreadsheet it is 18; parameter 8 is the first data group's number in this spreadsheet,for example,in this spreadsheet it is 1; parameter 9 is a select parameter,when you want to display all the datagroups select 0,when you want to display any one datagroup in this spreasheet select that datagroup's number;parameters 10,11 and 12 are the setting values about the data groups' number's font,10 and 11 decide the font size,12 decides the font color.
After input the data spreadsheet, by doing set these parameters values,the graph is drawn(the data is automatically processed inner).