详细介绍了如何在Linux系统上安装LXR，配置MySQL数据库，创建Glimpse索引，以及调整配置文件以实现源码浏览功能。
前言：折腾了好几天，终于把LXR搭建起来了，还好没有放弃，要不就失去了了解LXR，mysql，glimpse,apache的机会了。 除了使用LXR来浏览源码，还可以用global，请参考《 GNU GLOBAL Source Code Tag System浏览源码，很方便》http://blog.youkuaiyun.com/sanlinux/archive/2010/05/31/5637852.aspx 1.glimpse http://webglimpse.net/trial/glimpse-latest.tar.gz,安装方法可参考READER.INSTALL We have a script "configure" in our distribution which has recently been very much improved. To generate makefiles for your system, run sh configure ( see ./configure --help for options ) Then run make make install to put binaries under /usr/local/bin. To install to a different directory, see the --prefix and --bindir options of configure. 2.ctags #yum install ctags 3.mysql #yum install mysql mysql-server 4.httpd,mod_perl,perl的mysql驱动 ＃yum install mod_perl 注意：一般GNU/Linux系统中，httpd/apache以及perl都会已经安装好了。所以，就不用再重新安装了。如果没有安装也不用担心，建立一个yum本地源，然后安装，那也是很快的，yum本地源的安装方法请参考：《为Fedora 12设置本地YUM源 》http://blog.youkuaiyun.com/sanlinux/archive/2010/06/08/5656820.aspx 5.安装LXR，并创建mysql数据库。 5.1.LXR安装包下载安装 从http://sourceforge.net/projects/lxr/中选择0.96这个版本，0.98这个版本会报错： [@INC /usr/sbin/lib . /usr/local/lib/perl5/site_perl/5.10.0/i386-linux-thread-multi /usr/local/lib/perl5/site_perl/5.10.0 /usr/lib/perl5/ vendor_perl/5.10.0/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.10.0 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.10.0/i386-linux- thread-multi /usr/lib/perl5/5.10.0 /usr/lib/perl5/site_perl /etc/httpd $0 /usr/local/lxr/source 可能的原因：Mysql5及其上的数据库服务器，由于其将release设定为保留关键字，所以需要修改两个文件initdb-mysql 和 /usr/local/lxr/lib/LXR/Index/Mysql.pm,将里面的release改为`release` 安装步骤如下： #cd /usr/local #tar zxvf lxr-0.9.6.tgz #mv lxr-0.9.6 lxr #cd /usr/local/lxr #cp templates/* . 将lib/LXR目录拷贝到/usr/lib/perl5/site_perl目录下，如果没有site_perl，则创建。 #cp -rf /usr/local/lxr/lib/* /usr/lib/perl5/site_perl #cp /usr/local/lxr/Local.pm /usr/lib/perl5/site_perl 5.2.创建mysql数据库： #/etc/init.d/mysqld start #mysql -u root 如果有密码，请加-p参数。 #mysql>./ initdb-mysql 5.3.在/usr/local/lxr/目录下创建src目录，并在src目录下创建versions文件，文件内容如下： ＃cat /usr/local/lxr/src/versions 0.11 2.6.30 5.3.建立源码索引 ＃cd /usr/local/lxr/src #ln -s ~/Download/linux-0.11 0.11 #ln -s ~/Download/linux-2.6.30 2.6.30 5.4.http.conf和lxr.conf配置修改 当把文件都准备好，并且也放在相应的路径下以后，我们开始修改http.conf和lxr.conf文件。 ============================================= ***********/etc/httpd/conf/httpd.conf ============================================= 546 Alias /lxr "/usr/local/lxr" 547 <Directory "/usr/local/lxr"> 548 AllowOverride all 549 Options FollowSymLinks 550 <Files ~ (find|search|source|ident|diff|cgi-bin)$> 551 SetHandler perl-script 552 PerlHandler ModPerl::Registry 553 Options +ExecCGI 554 ForceType text/html(必须的，如果没有则显示html代码) 555 </Files> 556 </Directory> ============================================= ***********/usr/local/lxr/lxr.conf ============================================= 请参考附件 6.精髓之处在这 6.1.建立glimpse索引 #cd /usr/local/lxr/0.11 find . -name "*.[chS]" -follow | glimpseindex -H . -o -F #cd /usr/local/lxr/2.6.30 find . -name "*.[chS]" -follow | glimpseindex -H . -o -F 此步生成8个.glimpse开头的文件 -rw-r--r-- 1 root root 4249 2010-02-14 04:03 .glimpse_filenames -rw-r--r-- 1 root root 416 2010-02-14 04:03 .glimpse_filenames_index -rw-r--r-- 1 root root 0 2010-02-14 04:03 .glimpse_filetimes -rw-r--r-- 1 root root 56089 2010-02-14 04:03 .glimpse_index -rw-r--r-- 1 root root 485 2010-02-14 04:03 .glimpse_messages -rw-r--r-- 1 root root 19400 2010-02-14 04:03 .glimpse_partitions -rw-r--r-- 1 root root 261 2010-02-14 04:03 .glimpse_statistics -rw-r--r-- 1 root root 262144 2010-02-14 04:03 .glimpse_turbo #ls -la /usr/local/lxr/src/0.11/ total 396 drwxr-xr-x 10 root root 4096 2010-02-14 04:03 . drwxr-xr-x 3 root root 4096 2010-02-14 04:15 .. drwxr-xr-x 2 root root 4096 2010-02-14 04:02 boot drwxr-xr-x 2 root root 4096 2010-02-14 04:02 fs -rw-r--r-- 1 root root 4249 2010-02-14 04:03 .glimpse_filenames -rw-r--r-- 1 root root 416 2010-02-14 04:03 .glimpse_filenames_index -rw-r--r-- 1 root root 0 2010-02-14 04:03 .glimpse_filetimes -rw-r--r-- 1 root root 56089 2010-02-14 04:03 .glimpse_index -rw-r--r-- 1 root root 485 2010-02-14 04:03 .glimpse_messages -rw-r--r-- 1 root root 19400 2010-02-14 04:03 .glimpse_partitions -rw-r--r-- 1 root root 261 2010-02-14 04:03 .glimpse_statistics -rw-r--r-- 1 root root 262144 2010-02-14 04:03 .glimpse_turbo drwxr-xr-x 5 root root 4096 2010-02-14 04:02 include drwxr-xr-x 2 root root 4096 2010-02-14 04:02 init drwxr-xr-x 5 root root 4096 2010-02-14 04:02 kernel drwxr-xr-x 2 root root 4096 2010-02-14 04:02 lib -rw-r--r-- 1 root root 3126 2010-02-14 04:02 Makefile drwxr-xr-x 2 root root 4096 2010-02-14 04:02 mm drwxr-xr-x 2 root root 4096 2010-02-14 04:02 tools #ls -la /usr/local/lxr/src/2.6.30/ total 56792 drwxr-xr-x 22 san san 4096 2010-02-14 04:38 . drwxr-xr-x 8 san san 4096 2010-02-14 04:13 .. drwxr-xr-x 24 san san 4096 2009-06-10 11:05 arch drwxr-xr-x 2 san san 4096 2009-06-10 11:05 block -rw-r--r-- 1 san san 18693 2009-06-10 11:05 COPYING -rw-r--r-- 1 san san 93847 2009-06-10 11:05 CREDITS drwxr-xr-x 3 san san 4096 2009-06-10 11:05 crypto drwxr-xr-x 83 san san 12288 2009-06-10 11:05 Documentation drwxr-xr-x 84 san san 4096 2009-06-10 11:05 drivers drwxr-xr-x 33 san san 4096 2009-06-10 11:05 firmware drwxr-xr-x 70 san san 4096 2009-06-10 11:05 fs -rw-r--r-- 1 san san 885 2009-06-10 11:05 .gitignore -rw-r--r-- 1 root root 1570093 2010-02-14 04:38 .glimpse_filenames -rw-r--r-- 1 root root 110948 2010-02-14 04:38 .glimpse_filenames_index -rw-r--r-- 1 root root 0 2010-02-14 04:24 .glimpse_filetimes -rw-r--r-- 1 root root 34647574 2010-02-14 04:38 .glimpse_index -rw-r--r-- 1 root root 585072 2010-02-14 04:38 .glimpse_messages -rw-r--r-- 1 root root 20508550 2010-02-14 04:38 .glimpse_partitions -rw-r--r-- 1 root root 272 2010-02-14 04:38 .glimpse_statistics -rw-r--r-- 1 root root 262144 2010-02-14 04:38 .glimpse_turbo drwxr-xr-x 20 san san 4096 2009-06-10 11:05 include drwxr-xr-x 2 san san 4096 2009-06-10 11:05 init drwxr-xr-x 2 san san 4096 2009-06-10 11:05 ipc -rw-r--r-- 1 san san 2430 2009-06-10 11:05 Kbuild drwxr-xr-x 6 san san 4096 2009-06-10 11:05 kernel drwxr-xr-x 6 san san 4096 2009-06-10 11:05 lib -rw-r--r-- 1 san san 4021 2009-06-10 11:05 .mailmap -rw-r--r-- 1 san san 148271 2009-06-10 11:05 MAINTAINERS -rw-r--r-- 1 san san 55126 2009-06-10 11:05 Makefile drwxr-xr-x 2 san san 4096 2009-06-10 11:05 mm drwxr-xr-x 47 san san 4096 2009-06-10 11:05 net -rw-r--r-- 1 san san 17080 2009-06-10 11:05 README -rw-r--r-- 1 san san 3172 2009-06-10 11:05 REPORTING-BUGS drwxr-xr-x 7 san san 4096 2009-06-10 11:05 samples drwxr-xr-x 12 san san 4096 2009-06-10 11:05 scripts drwxr-xr-x 7 san san 4096 2009-06-10 11:05 security drwxr-xr-x 21 san san 4096 2009-06-10 11:05 sound drwxr-xr-x 2 san san 4096 2009-06-10 11:05 usr drwxr-xr-x 3 san san 4096 2009-06-10 11:05 virt 6.2.建立identity索引 #cd /usr/local/lxr #./genxref --version=0.11 --url=http://127.0.0.1/lxr #./genxref --version=2.6.30 --url=http://127.0.0.1/lxr 6.3.修改权限 #cd /usr/local/ #su - #chown apache.apache -R lxr 7.重启服务 #/etc/init.d/httpd restart #/etc/init.d/mysqld restart 8.数据库更新 如果仅仅是添加新的源码树，则只需修改src/versions文件，并重新glimpse索引。但是，如果遇到目录名变化的情况，而数据库使用的依然是老名字，则需重新建立glimpse和identity索引。 附件：lxr.conf # -*- mode: perl -*- # Configuration file # ( { # Global configuration # Path to glimpse executables. # Define this OR the swish-e variable depending which search engine you want to use. 'glimpsebin' => '/usr/local/bin/glimpse', 'glimpseindex' => '/usr/local/bin/glimpseindex', # Location of SWISH-E binary ####'swishbin' => '/usr/local/bin/swish-e', # Path to Exuberant Ctags executable 'ectagsbin' => '/usr/bin/ctags', # Place where lxr can write temporary files 'tmpdir' => '/tmp', # Location of the Generic.pm config file 'genericconf' => '/usr/lib/perl5/site_perl/LXR/Lang/generic.conf', # Location of the ectags.conf file 'ectagsconf' => '/usr/lib/perl5/site_perl/LXR/Lang/ectags.conf', # Paths for CVS module 'cvspath' => '/bin:/usr/local/bin:/usr/bin:/usr/sbin', }, { # Configuration for http://192.168.1.3/lxr. # baseurl is used to select configuration block. 'baseurl' => 'http://127.0.0.1/lxr', # Put your URL here # baseurl_aliases allows other URLs to be used to reach the site # comment this out if you do not want any aliases 'baseurl_aliases' => [ 'http://localhost/lxr', 'http://mydomain/lxr' ], 'virtroot' => '/lxr', # The bit after the / above 'variables' => { # Define typed variable "v". This is the list of versions to index. 'v' => { 'name' => 'Version', # This can come from a file, a function or be explicitly # ennumerated. # From a file: 'range' => [ readfile('/usr/local/lxr/src/versions') ], # Explicitly: # 'range' => [qw(v1 v2 v3.1 v4 experimental)], # If files within a tree can have different versions, # e.g in a CVS tree, 'range' can be specified as a # function to call for each file: #'range' => sub { return # ($files->allreleases($LXR::Common::pathname), # $files->allrevisions($LXR::Common::pathname)) # }, # deferred function call. # # When using a GIT repo, you can use its tags # to create a list of versions. As an extra # bonus, with the Linux::KernelSort Perl module, # you can properly sort kernel versions. Just # leave it off for generic projects. # # Simple example for any GIT repo: # 'range' => sub { # my $some_dir = "/path/to/project/.git/refs/tags"; # opendir (DIR, $some_dir) || die "cannot opendir $some_dir: $!"; # my @files = grep { -f "$some_dir/$_" } readdir (DIR); # closedir DIR; # return sort @files; # }, # # Advanced example for Linus's upstream # linux-2.6 kernel repository: # 'range' => sub { # use Linux::KernelSort; # my $kernel = new Linux::KernelSort; # # my $some_dir = "/path/to/linux-2.6/.git/refs/tags"; # opendir (DIR, $some_dir) || die "cannot opendir $some_dir: $!"; # my @files = grep { -f "$some_dir/$_" } readdir (DIR); # closedir DIR; # # Linus's tags all have a leading "v" # # which we must cut off for sorting # # add again afterwards. # for (my $i = 0; $i < scalar (@files); $i++) { # $files[$i] =~ s/^v//; # } # @files = $kernel->sort (@files); # for (my $i = 0; $i < scalar (@files); $i++) { # $files[$i] =~ s/^/v/; # } # # return @files; # }, # The default version to display 'default' => '0.11' }, # Define typed variable "a". First value is default. 'a' => { 'name' => 'Architecture', 'range' => [qw(i386 alpha arm m68k mips ppc sparc sparc64)] }, }, # These do funky things to paths in the system - you probably don't need them. 'maps' => { '/include/asm[^//]*/' => '/include/asm-$a/', '/arch/[^//]+/' => '/arch/$a/', }, # Templates used for headers and footers 'htmlhead' => '/usr/local/lxr/html-head.html', 'htmltail' => '/usr/local/lxr/html-tail.html', 'htmldir' => '/usr/local/lxr/html-dir.html', 'htmlident' => '/usr/local/lxr/html-ident.html', 'htmlident_refs' => '/usr/local/lxr/html-ident-refs.html', 'htmlfind' => '/usr/local/lxr/html-find.html', 'htmlsearch' => '/usr/local/lxr/html-search-swish.html', 'sourcehead' => '/usr/local/lxr/html-head.html', 'sourcedirhead' => '/usr/local/lxr/html-head.html', 'stylesheet' => '/usr/local/lxr/lxr.css', # sourceroot - where to get the source files from # For ordinary directories, this specifies a directory which has each version as a # subdirectory e.g. # indexed-src/version1/... # indexed-src/version2/... # The names of the version directories must match the values for the Version # variable above. 'sourceroot' => '/usr/local/lxr/src', # Alternatively, this can specify a CVS repository by setting the value to "cvs:" # followed by the path to the repository. Note this must be file accessible - remote # server access does NOT work. # 'sourceroot' => 'cvs:/hom/karsk/a/CVSROOT/linux', # For a BitKeeper repository, specify bk: followed by the path to the # repository. For BK it is also necessary to specify a 'cachepath' parameter in # the 'sourceparams' value below. This should point to a directory where the # code can write and read files. # 'sourceroot' => 'bk:/some/repository/here', # Finally, you can also use GIT, Linux Kernel's new # distributes SCM to access the history: # 'sourceroot' => 'git:/some/repository/.git' # 'sourceroot' => 'git:/some/repostitory.git' # The `sourceroot' config variable points to the directory # in which you find the `objects', `refs', `index' etc. # directories. # The name to display for this source tree 'sourcerootname' => 'SANTec', # # Any parameters to the source access method should be specified below. # # BK: 'cachepath' is used for temporary files # GIT: if `do_annotations' is non-zero, the file revision that # introduced each line is displayed. # `do_blame' will add the author of each line to the # output. Keep in mind that the core LXR code # will only request author information if # annotations are switched on, too! # 'sourceparams' => { 'cachepath' => '/a/path/here', 'do_annotate' => 1, 'do_blame' => 1, }, # The DBI identifier for the database to use # For mysql, the format is dbi:mysql:dbname=<name> # for Postgres, it is dbi:Pg:dbname=<name> # for Oracle, it is dbi:Oracle:host=localhost;sid=DEVMMS;port=1521 'dbname' => 'dbi:mysql:dbname=lxr', # If you need to specify the username or password for the database connection, # uncomment the following two lines # 'dbpass' => 'foo', # 'dbuser' => 'lxr', # If you need multiple lxr configurations in one database, set different table # prefixes for them. # 'dbprefix' => 'lxr_', # For using glimpse, the directory to store the .glimpse files in is required 'glimpsedir' => '/usr/local/lxr/src/', # Location of swish-e index database files if using swish-e ###'swishdir' => '/a/directory/here/', # where to look for include files inside the sourcetree. This is used to hyperlink # to included files. 'incprefix' => [ '/include', '/include/linux' ], # Which extensions to treat as images when browsing. If a file is an image, # it is displayed. 'graphicfile' => '(?i)/.(gif|jpg|jpeg|pjpg|pjpeg|xbm|png)$', #' # How to map files to languages # Note that the string for the key and the first entry in the # array MUST match 'filetype' => { # Format is # Language name, filepatten regexp, module to invoke, # (optional )tabwidth # Note that to have another language supported by Generic.pm, # you must ensure that: # a) exuberant ctags supports it # b) generic.conf is updated to specify information about the language # c) the name of the language given here matches the entry in generic.conf 'C' => [ 'C', '/.c$|/.pc$' #' , 'LXR::Lang::Generic', '8' ], 'C++' => [ 'C++', '/.C$|((?i)/.c/+/+$|/.cc$|/.cpp$|/.cxx$|/.h$|/.hh$|/.hpp$|/.hxx$|/.h/+/+$)' #' , 'LXR::Lang::Generic', '8' ], # Some languages are commented out until the relevant entries in generic.conf are made # The list here is the set supported by ctags 5.0.1 # 'Beta' => [ 'Beta', '(?i)/.bet$', 'LXR::Lang::Generic' ], # 'Eiffel' => [ 'Eiffel', '(?i)/.e$', 'LXR::Lang::Generic' ], # 'Fortran' => # [ 'Fortran', '(?i)/.f$|/.for$|/.ftn$|/.f77$|/.f90$|/.f95$', 'LXR::Lang::Generic' ], 'Cobol' => [ 'Cobol', '(?i)/.cob$', 'LXR::Lang::Cobol' ], 'Java' => [ 'Java', '(?i)/.java$', 'LXR::Lang::Java', '4' ], # 'Lisp' => [ # 'Lisp', '(?i)/.cl$|/.clisp$|/.el$|/.l$|/.lisp$|/.lsp$|/.ml$', 'LXR::Lang::Generic' # ], # No tabwidth specified here as an example 'Make' => [ 'Make', '(?i)/.mak$|(?i)/.mk$|makefile*', 'LXR::Lang::Generic' ], # 'Pascal' => [ 'Pascal', '(?i)/.p$|/.pas$', 'LXR::Lang::Generic' ], 'Perl' => [ 'Perl', '(?i)/.pl$|/.pm$|/.perl$', 'LXR::Lang::Generic', '4' ], 'php' => [ 'php', '(?i)/.php$|/.php3$|/.phtml$', 'LXR::Lang::Generic', '2' ], 'Python' => [ 'Python', '(?i)/.py$|/.python$', 'LXR::Lang::Generic', '4' ], # 'rexx' => [ 'rexx', '(?i)/.cmd$|/.rexx$|/.rx$', 'LXR::Lang::Generic' ], # 'ruby' => [ 'ruby', '(?i)/.rb$', 'LXR::Lang::Generic' ], # 'scheme' => [ 'scheme', '(?i)/.sch$|/.scheme$|/.scm$|/.sm$', 'LXR::Lang::Generic' ], 'shell' => [ 'shell', '(?i)/.sh$|/.bsh$|/.bash$|/.ksh$|/.zsh$', 'LXR::Lang::Generic' ], # 's-Lang' => [ 's-Lang', '(?i)/.sl$', 'LXR::Lang::Generic' ], 'SQL' => [ 'SQL', '(?i)/.sql$|/.pks$|/.pkb$', 'LXR::Lang::Generic' ], 'VB' => [ 'VB', '(?i)/.bas$|/.cls$|/.ctl$|/.frm$|/.vbs$', 'LXR::Lang::Generic' ], #'tcl' => [ 'tcl', '(?i)/.tcl$|/.wish$', 'LXR::Lang::Generic' ], }, # Maps interpreter names to languages. The format is: # regexp => langname # regexp is matched against the part after #! on the first line of a file # langname must match one of the keys in filetype above. # # This mapping is only used if the filename doesn't match a pattern above, so # a shell script called shell.c will be recognised as a C file, not a shell file. 'interpreters' => { 'perl' => 'Perl', 'bash' => 'shell', 'csh' => 'shell', 'python' => 'Python', 'ksh' => 'shell', 'zsh' => 'shell', 'sh' => 'shell', 'ksh' => 'shell', }, # a link of the form (prefix)($filepath)(postfix) is generated when viewing a file # example for cvsweb: #'cvswebprefix' => 'http://cvs.myhost.com/cgi-bin/cvsweb.cgi', #'cvswebpostfix' => '?cvsroot=rootname', # example for viewcvs: #'cvswebprefix' => 'http://cvs.myhost.com/cgi-bin/viewcvs.cgi/myroot', #'cvswebpostfix' => '', # Directories to always ignore. These usually are the SCM's # private directories which possibly may contain non-public # project history. 'ignoredirs' => ['CVSROOT', '.git'], } ) 其它 ＃ls /usr/local/lxr -la total 280 drwxr-xr-x 6 1000 1000 4096 2010-02-14 04:05 . drwxr-xr-x 14 root root 4096 2010-02-14 03:47 .. -rw-r--r-- 1 1000 1000 105 2002-01-19 15:23 BUGS -rw-r--r-- 1 1000 1000 54288 2009-03-26 00:51 ChangeLog -rw-r--r-- 1 1000 1000 834 2002-02-27 00:18 CREDITS.txt -rw-r--r-- 1 1000 1000 183 2005-11-03 07:39 .cvsignore -rwxr-xr-x 1 1000 1000 5113 2005-11-03 07:39 diff -rwxr-xr-x 1 1000 1000 4304 2004-09-02 23:26 find -rwxr-xr-x 1 1000 1000 6181 2009-03-24 00:51 genxref -rw-r--r-- 1 1000 1000 2502 1999-06-16 17:17 HACKING -rw-r--r-- 1 1000 1000 309 2009-03-23 23:49 .htaccess-apache1 -rw-r--r-- 1 1000 1000 301 2009-03-24 00:41 .htaccess-apache2 -rw-r--r-- 1 1000 1000 290 2009-03-23 22:34 .htaccess_cgi -rw-r--r-- 1 root root 748 2010-02-14 03:47 html-dir.html -rw-r--r-- 1 root root 686 2010-02-14 03:47 html-find.html -rw-r--r-- 1 root root 1156 2010-02-14 03:47 html-head.html -rw-r--r-- 1 root root 508 2010-02-14 03:47 html-ident.html -rw-r--r-- 1 root root 136 2010-02-14 03:47 html-ident-refs.html -rw-r--r-- 1 root root 1125 2010-02-14 03:47 html-search-glimpse.html -rw-r--r-- 1 root root 1433 2010-02-14 03:47 html-search-swish.html -rw-r--r-- 1 root root 724 2010-02-14 03:47 html-tail.html -rwxr-xr-x 1 1000 1000 4194 2004-09-02 23:26 ident -rw-r--r-- 1 1000 1000 2051 2009-03-23 20:27 initdb-mysql -rw-r--r-- 1 1000 1000 3326 2004-10-26 04:18 initdb-oracle.sql -rw-r--r-- 1 1000 1000 1905 2006-12-21 03:54 initdb-postgres -rw-r--r-- 1 1000 1000 9594 2009-03-23 23:49 INSTALL drwxr-xr-x 3 1000 1000 4096 2009-03-26 00:51 lib -rw-r--r-- 1 1000 1000 18009 2001-08-15 23:50 LICENSE -rw-r--r-- 1 1000 1000 14069 2004-07-22 04:44 Local.pm -rw-r--r-- 1 root root 11002 2010-02-14 04:05 lxr.conf -rw-r--r-- 1 root root 2892 2010-02-14 03:47 lxr.css -rw-r--r-- 1 1000 1000 614 2000-01-05 15:54 notes -rw-r--r-- 1 1000 1000 426 2007-04-15 06:33 RELEASING -rwxr-xr-x 1 1000 1000 8718 2006-04-08 21:37 search -rwxr-xr-x 1 1000 1000 7808 2005-11-03 07:39 source drwxr-xr-x 3 root root 4096 2010-02-14 04:15 src -rw-r--r-- 1 1000 1000 622 2004-07-14 23:00 swish-e.conf drwxr-xr-x 2 1000 1000 4096 2009-03-26 00:51 templates drwxr-xr-x 2 1000 1000 4096 2009-03-26 00:51 tests #ls /usr/local/lxr/src/ -la total 16 drwxr-xr-x 3 root root 4096 2010-02-14 04:15 . drwxr-xr-x 6 1000 1000 4096 2010-02-14 04:05 .. drwxr-xr-x 10 root root 4096 2010-02-14 04:03 0.11 lrwxrwxrwx 1 root root 32 2010-02-14 04:15 2.6.30 -> ~/Downloads/linux-2.6.30 -rw-r--r-- 1 root root 12 2010-02-14 04:15 versions #ls /usr/local/lxr/src/0.11/ -la total 396 drwxr-xr-x 10 root root 4096 2010-02-14 04:03 . drwxr-xr-x 3 root root 4096 2010-02-14 04:15 .. drwxr-xr-x 2 root root 4096 2010-02-14 04:02 boot drwxr-xr-x 2 root root 4096 2010-02-14 04:02 fs -rw-r--r-- 1 root root 4249 2010-02-14 04:03 .glimpse_filenames -rw-r--r-- 1 root root 416 2010-02-14 04:03 .glimpse_filenames_index -rw-r--r-- 1 root root 0 2010-02-14 04:03 .glimpse_filetimes -rw-r--r-- 1 root root 56089 2010-02-14 04:03 .glimpse_index -rw-r--r-- 1 root root 485 2010-02-14 04:03 .glimpse_messages -rw-r--r-- 1 root root 19400 2010-02-14 04:03 .glimpse_partitions -rw-r--r-- 1 root root 261 2010-02-14 04:03 .glimpse_statistics -rw-r--r-- 1 root root 262144 2010-02-14 04:03 .glimpse_turbo drwxr-xr-x 5 root root 4096 2010-02-14 04:02 include drwxr-xr-x 2 root root 4096 2010-02-14 04:02 init drwxr-xr-x 5 root root 4096 2010-02-14 04:02 kernel drwxr-xr-x 2 root root 4096 2010-02-14 04:02 lib -rw-r--r-- 1 root root 3126 2010-02-14 04:02 Makefile drwxr-xr-x 2 root root 4096 2010-02-14 04:02 mm drwxr-xr-x 2 root root 4096 2010-02-14 04:02 tools #ls -la /usr/lib/perl5/ total 80 drwxr-xr-x 6 root root 4096 2010-02-14 03:58 . dr-xr-xr-x 153 root root 57344 2010-02-14 04:34 .. drwxr-xr-x 45 root root 4096 2010-02-13 05:42 5.10.0 drwxr-xr-x 3 root root 4096 2010-02-14 03:59 site_perl drwxr-xr-x 3 root root 4096 2010-02-13 06:59 site_perl.old drwxr-xr-x 3 root root 4096 2009-12-01 23:22 vendor_perl #ls -la /usr/lib/perl5/site_perl total 28 drwxr-xr-x 3 root root 4096 2010-02-14 03:59 . drwxr-xr-x 6 root root 4096 2010-02-14 03:58 .. -rw-r--r-- 1 root root 14069 2010-02-14 03:59 Local.pm drwxr-xr-x 5 root root 4096 2010-02-14 03:58 LXR #ls -la /usr/lib/perl5/site_perl/LXR/ total 72 drwxr-xr-x 5 root root 4096 2010-02-14 03:58 . drwxr-xr-x 3 root root 4096 2010-02-14 03:59 .. -rw-r--r-- 1 root root 23158 2010-02-14 03:58 Common.pm -rw-r--r-- 1 root root 4887 2010-02-14 03:58 Config.pm drwxr-xr-x 2 root root 4096 2010-02-14 03:58 Files -rw-r--r-- 1 root root 2702 2010-02-14 03:58 Files.pm drwxr-xr-x 2 root root 4096 2010-02-14 03:58 Index -rw-r--r-- 1 root root 1339 2010-02-14 03:58 Index.pm drwxr-xr-x 2 root root 4096 2010-02-14 03:58 Lang -rw-r--r-- 1 root root 2739 2010-02-14 03:58 Lang.pm -rw-r--r-- 1 root root 4034 2010-02-14 03:58 SimpleParse.pm -rw-r--r-- 1 root root 2587 2010-02-14 03:58 Tagger.pm 本文文本及LXR效果图下载链接： http://d.download.youkuaiyun.com/down/2443604/sanlinux http://hi.youkuaiyun.com/attachment/201006/9/0_1276092749EK9K.gif
扫一扫
1113
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
