uva-11044 - Searching for Nessy

本文通过一个具体的数学题目,展示了如何使用C语言编程解决实际问题。该程序接收两个整数输入,计算每个数除以3后的商,并输出这两个商的乘积。此例强调了数学在编程中的应用。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

我觉得学好数学对编程很有帮助啊,又是一个数学题,,,,,

#include<stdio.h>
int main()
{
	int T,a,b;
	scanf("%d",&T);
	while(T--)
	{
		scanf("%d%d",&a,&b);
		printf("%d\n",(a/3)*(b/3));
	}
	return 0;
}

(ns3-venv) [root@localhost bake]# ./bake.py show module: qt4 (enabled) No dependencies! module: g++ (enabled) No dependencies! module: setuptools (enabled) No dependencies! module: pygoocanvas (enabled) No dependencies! module: pygraphviz (enabled) No dependencies! module: python-dev (enabled) No dependencies! module: gccxml-ns3 (enabled) No dependencies! module: netanim-3.107 (enabled) depends on: qt4 (optional:False) g++ (optional:False) module: pyviz-prerequisites (enabled) depends on: python-dev (optional:True) pygraphviz (optional:True) pygoocanvas (optional:True) module: pygccxml (enabled) depends on: gccxml-ns3 (optional:False) setuptools (optional:False) module: pybindgen-0.17.0.post57+nga6376f2 (enabled) depends on: pygccxml (optional:True) python-dev (optional:True) setuptools (optional:False) module: ns-3.26 (enabled) depends on: netanim-3.107 (optional:True) pybindgen-0.17.0.post57+nga6376f2 (optional:True) pyviz-prerequisites (optional:True) -- System Dependencies -- > g++ - OK > pygoocanvas - OK > pygraphviz - OK > python-dev - OK > qt4 - OK > setuptools - OK (ns3-venv) [root@localhost bake]# ./bake.py download >> Searching for system dependency qt4 - OK >> Searching for system dependency g++ - OK >> Searching for system dependency setuptools - OK >> Searching for system dependency pygoocanvas - OK >> Searching for system dependency pygraphviz - OK >> Searching for system dependency python-dev - OK >> Downloading gccxml-ns3 (target directory:gccxml) - Problem > Problem: Optional dependency, module "gccxml-ns3" failed This may reduce the functionality of the final build. However, bake will continue since "gccxml-ns3" is not an essential dependency. For more information call bake with -v or -vvv, for full verbose mode. >> Downloading netanim-3.107 - Problem > Problem: Optional dependency, module "netanim-3.107" failed This may reduce the functionality of the final build. However, bake will continue since "netanim-3.107" is not an essential dependency. For more information call bake with -v or -vvv, for full verbose mode. >> Downloading pygccxml - (Nothing to do, source directory already exists) - OK >> Downloading pybindgen-0.17.0.post57+nga6376f2 (target directory:pybindgen) - (Nothing to do, source directory already exists) - OK >> Downloading ns-3.26 - Problem > Error: Critical dependency, module "ns-3.26" failed For more information call Bake with --debug and/or -v, -vvv, for full verbose mode (bake --help)
06-13
<think>我们正在处理用户关于ns-3.26及其依赖项下载失败的问题,特别是gccxml-ns3和netanim-3.107的依赖问题。根据用户提供的引用[1]和[2],我们知道用户正在尝试构建ns-3.26,并且之前已经进行过下载和构建的尝试。问题分析:1.ns-3.26下载失败:可能由于网络问题或源不可用。2.gccxml-ns3和netanim-3.107依赖问题:这两个是ns-3的可选组件,可能在下载或编译时出现问题。解决方案:1.对于ns-3.26下载失败:-尝试使用不同的下载方式,比如直接下载压缩包。-官方提供了两种下载方式:使用Mercurial(hg)克隆仓库,或下载压缩包。如果网络问题导致克隆失败,可以下载压缩包。-ns-3.26的压缩包下载地址:https://www.nsnam.org/release/ns-allinone-3.26.tar.bz22.对于依赖项gccxml-ns3和netanim-3.107:-gccxml-ns3是一个用于生成Python绑定的工具,但自ns-3.26起,官方已经转向使用castxml和pygccxml。因此,gccxml-ns3可能已经不再需要,或者需要替换为castxml。-netanim-3.107是网络动画可视化工具,需要单独下载和编译。具体步骤:步骤1:下载ns-allinone-3.26压缩包```bashwgethttps://www.nsnam.org/release/ns-allinone-3.26.tar.bz2tarxjfns-allinone-3.26.tar.bz2```步骤2:解决netanim-3.107依赖netanim需要Qt4开发包。在Ubuntu上,可以安装:```bashsudoapt-getinstallqt4-default```然后进入netanim目录编译:```bashcdns-allinone-3.26/netanim-3.107makecleanqmakeNetAnim.promake```步骤3:关于gccxml-ns3在ns-3.26中,gccxml已经被castxml替代。因此,如果构建脚本仍然尝试下载gccxml-ns3,可能需要更新构建配置。可以尝试跳过Python绑定(如果不需要):```bash./build.py--enable-examples--enable-tests--disable-python-bindings```或者,安装castxml和pygccxml:```bashsudoapt-getinstallcastxmlpipinstallpygccxml```然后正常构建ns-3。步骤4:构建ns-3```bashcdns-allinone-3.26./build.py--enable-examples--enable-tests```如果构建过程中出现其他依赖问题,根据错误提示安装相应的开发包。参考用户之前尝试的步骤(引用[1]和[2]),用户已经进入ns-allinone-3.26文件夹并运行了build.py,但可能由于依赖问题失败。注意:由于ns-3版本更新,部分旧组件可能已不再支持,因此如果上述方法无效,可以考虑使用更新的ns-3版本(如3.30以上),或者使用系统包管理器安装(如果可用)。根据引用[1]和[2],用户已经下载了ns-allinone-3.26,所以重点解决依赖问题。如果用户按照上述步骤仍然遇到问题,可以提供具体的错误信息以便进一步分析。生成相关问题:1.如何安装ns-3的其他依赖项(如libxml2、sqlite等)?2.如何运行ns-3的测试用例来验证安装?3.如何在ns-3中运行示例脚本?注意:用户可能不需要gccxml-ns3,因为它是旧版绑定工具,新版已经使用castxml。</think>### NS-3.26 下载失败及依赖问题解决方案 #### 问题分析 1. **gccxml-ns3 依赖问题** gccxml-ns3 是旧版NS-3使用的Python绑定生成工具,在NS-3.26中已被弃用。官方已转向**castxml + pygccxml**方案[^1]。 2. **netanim-3.107 依赖问题** NetAnim需要Qt4开发环境,但现代系统默认安装Qt5,可能导致编译失败。 #### 完整解决方案 ##### 步骤1:跳过过时组件 直接下载纯净版NS-3.26(不包含netanim/gccxml): ```bash wget https://www.nsnam.org/releases/ns-3.26.tar.bz2 tar xjf ns-3.26.tar.bz2 cd ns-3.26 ``` ##### 步骤2:安装核心依赖 ```bash # Ubuntu/Debian sudo apt install build-essential libsqlite3-dev libxml2-dev \ libgtk-3-dev cmake python3-pygraphviz castxml # 安装新版绑定工具 pip3 install pygccxml ``` ##### 步骤3:编译NS-3核心 ```bash ./ns3 configure --enable-examples --enable-tests ./ns3 build ``` ##### 步骤4:单独安装NetAnim(可选) ```bash # 安装Qt4兼容层 sudo apt install qt4-default qt4-dev-tools # 下载编译NetAnim wget https://www.nsnam.org/releases/netanim-3.108.tar.bz2 tar xjf netanim-3.108.tar.bz2 cd netanim-3.108 qmake NetAnim.pro make -j$(nproc) ``` ##### 步骤5:验证安装 ```bash # 运行测试用例 ./test.py # 执行示例脚本 ./waf --run hello-simulator ``` [^1][^2] #### 关键注意事项 1. **gccxml替代方案** `castxml + pygccxml` 是官方推荐的新绑定工具链,无需额外配置[^1]。 2. **NetAnim兼容性** 若需Qt5支持,建议使用更新的**NetAnim-3.108**: ```bash git clone https://gitlab.com/nsnam/netanim.git cd netanim qmake NetAnim.pro make ``` 3. **代理设置(如遇下载失败)** 在`~/.waf3/settings_cache.py`中添加: ```python ENV = {'http_proxy': 'http://your_proxy:port', 'https_proxy': 'http://your_proxy:port'} ``` 4. **依赖问题排查** 使用`./ns3 configure -d`查看详细依赖检测结果
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值