scientific linux下 用Python for S60的Bluetooth Console编写手机程序

参考文章：http://www.handaoliang.com/article_63.html

                   http://sidrit.wordpress.com/2009/01/23/ubuntu-serial-port-bluetooth-console-nokia-e61i-python/

 

首先，再scientific linux下安装Putty.

如果在编译的时候，出现错误，试着修改Makefile文件。去掉 -Werror选项。

 

 

First we need to know if the BT dongle is up and running. Open a shell window and type:

hcitool dev

 

If everything is running properly, the output should be something similar to this:
sid@dev:~$ hcitool dev
Devices:
hci0 00:02:72:XX:XX:XX

The next two steps are quite a logical following :

1. Create a serial port on the pc

sdptool add --channel=3 SP

that should output:
Serial Port service registered

 

2. Start listening for connections on that port:

rfcomm listen rfcomm0 3

that should output:
Waiting for connection on channel 3

 

Now on the phone, enable bluetooth, start up the python shell the choose:
Options -> Bluetooth console and select from the devices list the BT device of the computer

Done this, on the phone screen’s python shell you should see something similar:

Connecting to ('00:02:72:XX:XX:XX', 3)... OK.
telling that the connection with our device succeeded.

Meanwhile on the command line, where we are listening for connections on the serial port 3, the output should be:

 

rfcomm listen rfcomm0 3
Waiting for connection on channel 3
Connection from 00:17:E5:XX:XX:XX to /dev/rfcomm0
Press CTRL-C for hangup

 

If you’ve gotten this far with these results, we’re all good and we have one more step left.

 

由于貌似scientific linux下没有 cu 命令，所以要用Putty来解决

 

 

首先，connect type选择Serial，然后在Serial line中填入地址，Save一下，然后Open，就可以连接到手机Python控制台了。