flume-conf.properties.template

最新推荐文章于 2024-12-09 14:15:28 发布

coder.yang

最新推荐文章于 2024-12-09 14:15:28 发布

阅读量400

点赞数

CC 4.0 BY-SA版权

分类专栏： flume

本文链接：https://blog.youkuaiyun.com/qq_18532033/article/details/88712720

flume 专栏收录该内容

5 篇文章

订阅专栏

[root@node002 conf]# vim flume-conf.properties.template 



# The configuration file needs to define the sources, 
# the channels and the sinks.
# Sources, channels and sinks are defined per agent, 
# in this case called 'agent'

agent.sources = seqGenSrc
agent.channels = memoryChannel
agent.sinks = loggerSink

# For each one of the sources, the type is defined
agent.sources.seqGenSrc.type = seq

# The channel can be defined as follows.
agent.sources.seqGenSrc.channels = memoryChannel

# Each sink's type must be defined
agent.sinks.loggerSink.type = logger

#Specify the channel the sink should use
agent.sinks.loggerSink.channel = memoryChannel

# Each channel's type is defined.
agent.channels.memoryChannel.type = memory

# Other config values specific to each type of channel(sink or source)
# can be defined as well
# In this case, it specifies the capacity of the memory channel
agent.channels.memoryChannel.capacity = 100