redis 配置文件 append only file(aof)部分---数据持久化

最新推荐文章于 2024-08-21 14:59:54 发布

修行者坚守者

最新推荐文章于 2024-08-21 14:59:54 发布

阅读量381

点赞数 1

分类专栏： redis

redis 专栏收录该内容

8 篇文章

订阅专栏

转：http://blog.youkuaiyun.com/wkupaochuan/article/details/8776175

上一篇翻译之后，发觉通过翻译虽然比较吃力（不熟悉，多练习应该可以更熟练），但是能够较好的帮助理解Redis的功能，遂继续翻译了aof部分，如下

原文：

[python] view plain copy print ?

############################## APPEND ONLY MODE ###############################
# By default Redis asynchronously dumps the dataset on disk. This mode is
# good enough in many applications, but an issue with the Redis process or
# a power outage may result into a few minutes of writes lost (depending on
# the configured save points).
#
# The Append Only File is an alternative persistence mode that provides
# much better durability. For instance using the default data fsync policy
# (see later in the config file) Redis can lose just one second of writes in a
# dramatic event like a server power outage, or a single write if something
# wrong with the Redis process itself happens, but the operating system is
# still running correctly.
#
# AOF and RDB persistence can be enabled at the same time without problems.
# If the AOF is enabled on startup Redis will load the AOF, that is the file
# with the better durability guarantees.
#
# Please check http://redis.io/topics/persistence for more information.
appendonly no
# The name of the append only file (default: "appendonly.aof")
# appendfilename appendonly.aof
# The fsync() call tells the Operating System to actually write data on disk
# instead to wait for more data in the output buffer. Some OS will really flush
# data on disk, some other OS will just try to do it ASAP.
#
# Redis supports three different modes:
#
# no: don't fsync, just let the OS flush the data when it wants. Faster.
# always: fsync after every write to the append only log . Slow, Safest.
# everysec: fsync only one time every second. Compromise.
#
# The default is "everysec", as that's usually the right compromise between
# speed and data safety. It's up to you to understand if you can relax this to
# "no" that will let the operating system flush the output buffer when
# it wants, for better performances (but if you can live with the idea of
# some data loss consider the default persistence mode that's snapshotting),
# or on the contrary, use "always" that's very slow but a bit safer than
# everysec.
#
# More details please check the following article:
# http://antirez.com/post/redis-persistence-demystified.html
#
# If unsure, use "everysec".
# appendfsync always
appendfsync always
# appendfsync no
# When the AOF fsync policy is set to always or everysec, and a background
# saving process (a background save or AOF log background rewriting) is
# performing a lot of I/O against the disk, in some Linux configurations
# Redis may block too long on the fsync() call. Note that there is no fix for
# this currently, as even performing fsync in a different thread will block
# our synchronous write(2) call.
#
# In order to mitigate this problem it's possible to use the following option
# that will prevent fsync() from being called in the main process while a
# BGSAVE or BGREWRITEAOF is in progress.
#
# This means that while another child is saving, the durability of Redis is
# the same as "appendfsync none". In practical terms, this means that it is
# possible to lose up to 30 seconds of log in the worst scenario (with the
# default Linux settings).
#
# If you have latency problems turn this to "yes". Otherwise leave it as
# "no" that is the safest pick from the point of view of durability.
no-appendfsync-on-rewrite no
# Automatic rewrite of the append only file.
# Redis is able to automatically rewrite the log file implicitly calling
# BGREWRITEAOF when the AOF log size grows by the specified percentage.
#
# This is how it works: Redis remembers the size of the AOF file after the
# latest rewrite (if no rewrite has happened since the restart, the size of
# the AOF at startup is used).
#
# This base size is compared to the current size. If the current size is
# bigger than the specified percentage, the rewrite is triggered. Also
# you need to specify a minimal size for the AOF file to be rewritten, this
# is useful to avoid rewriting the AOF file even if the percentage increase
# is reached but it is still pretty small.
#
# Specify a percentage of zero in order to disable the automatic AOF
# rewrite feature.
auto-aof-rewrite-percentage 100
auto-aof-rewrite-min-size 64mb

############################## APPEND ONLY MODE ###############################

# By default Redis asynchronously dumps the dataset on disk. This mode is
# good enough in many applications, but an issue with the Redis process or
# a power outage may result into a few minutes of writes lost (depending on
# the configured save points).
#
# The Append Only File is an alternative persistence mode that provides
# much better durability. For instance using the default data fsync policy
# (see later in the config file) Redis can lose just one second of writes in a
# dramatic event like a server power outage, or a single write if something
# wrong with the Redis process itself happens, but the operating system is
# still running correctly.
#
# AOF and RDB persistence can be enabled at the same time without problems.
# If the AOF is enabled on startup Redis will load the AOF, that is the file
# with the better durability guarantees.
#
# Please check http://redis.io/topics/persistence for more information.

appendonly no

# The name of the append only file (default: "appendonly.aof")
# appendfilename appendonly.aof

# The fsync() call tells the Operating System to actually write data on disk
# instead to wait for more data in the output buffer. Some OS will really flush 
# data on disk, some other OS will just try to do it ASAP.
#
# Redis supports three different modes:
#
# no: don't fsync, just let the OS flush the data when it wants. Faster.
# always: fsync after every write to the append only log . Slow, Safest.
# everysec: fsync only one time every second. Compromise.
#
# The default is "everysec", as that's usually the right compromise between
# speed and data safety. It's up to you to understand if you can relax this to
# "no" that will let the operating system flush the output buffer when
# it wants, for better performances (but if you can live with the idea of
# some data loss consider the default persistence mode that's snapshotting),
# or on the contrary, use "always" that's very slow but a bit safer than
# everysec.
#
# More details please check the following article:
# http://antirez.com/post/redis-persistence-demystified.html
#
# If unsure, use "everysec".

# appendfsync always
appendfsync always

# appendfsync no

# When the AOF fsync policy is set to always or everysec, and a background
# saving process (a background save or AOF log background rewriting) is
# performing a lot of I/O against the disk, in some Linux configurations
# Redis may block too long on the fsync() call. Note that there is no fix for
# this currently, as even performing fsync in a different thread will block
# our synchronous write(2) call.
#
# In order to mitigate this problem it's possible to use the following option
# that will prevent fsync() from being called in the main process while a
# BGSAVE or BGREWRITEAOF is in progress.
#
# This means that while another child is saving, the durability of Redis is
# the same as "appendfsync none". In practical terms, this means that it is
# possible to lose up to 30 seconds of log in the worst scenario (with the
# default Linux settings).
# 
# If you have latency problems turn this to "yes". Otherwise leave it as
# "no" that is the safest pick from the point of view of durability.
no-appendfsync-on-rewrite no


# Automatic rewrite of the append only file.
# Redis is able to automatically rewrite the log file implicitly calling
# BGREWRITEAOF when the AOF log size grows by the specified percentage.
# 
# This is how it works: Redis remembers the size of the AOF file after the
# latest rewrite (if no rewrite has happened since the restart, the size of
# the AOF at startup is used).
#
# This base size is compared to the current size. If the current size is
# bigger than the specified percentage, the rewrite is triggered. Also
# you need to specify a minimal size for the AOF file to be rewritten, this
# is useful to avoid rewriting the AOF file even if the percentage increase
# is reached but it is still pretty small.
#
# Specify a percentage of zero in order to disable the automatic AOF
# rewrite feature.

auto-aof-rewrite-percentage 100
auto-aof-rewrite-min-size 64mb

译文：

[python] view plain copy print ?

############################## 仅追加方式 ###############################
#默认情况下Redis会异步的将数据导出到磁盘上。这种模式对许多应用程序已经足够了，
#但是如果断电或者redis进程出问题就会导致一段时间内的更新数据丢失（取决与配置项）
#
#这种只增文件是可选的能够提供更好的体验的数据持久化策略。
#举个例子，如果使用默认的配置数据fsync策略，在服务器意外断电的情况下redis只会丢失一秒中内的更新数据，
#或者当redis进程出问题但操作系统运转正常时，redis只会丢失一个数据更新操作。
#
#AOF 和 RDB 持久化方式可以同时启动并且无冲突。
#如果AOF开启，启动redis时会加载aof文件，这些文件能够提供更好的保证。
#请在 http://redis.io/topics/persistence 获取更多数据持久化信息。
appendonly no
# 只增文件的文件名称。（默认是appendonly.aof）
# appendfilename appendonly.aof
#调用fsync()函数会通知操作系统真正将数据写入磁盘，而不是等待缓冲区中有更多数据。
#有些操作系统会将数据输出到磁盘，有些操作系统只是ASAP。
#
#redis支持三种不同的方式：
#
#no:不调用，之等待操作系统来清空缓冲区当操作系统要输出数据时。很快。
# always: 每次更新数据都写入仅增日志文件。慢，但是最安全。
# everysec: 每秒调用一次。折中。
#
#默认是每秒中一次，因为它往往是在速度和数据安全两者之间的折中选择。
#如果你可以接受让操作系统去自动清空缓存，你可以将这项配置降低到'no'(如果你可以接受一段时间的数据丢失，默认的rdb就足够了)，
#这完全取决与你。如果你想要一个更好的体验或者从相反的角度，使用'always'，这样会很慢，但是比'everysec'安全些。
#
#请在下面的文章中获取更多细节知识：
# http://antirez.com/post/redis-persistence-demystified.html
#
#如果你不是很清楚这三项之间的区别，或者不知道哪种适合你的机器，就是用默认吧。
# appendfsync always
appendfsync always
# appendfsync no
#当AOF策略设置为'always'或者'everysec'的时候，后台的保存进程会进行很多磁盘I／O操作，
#在某些linux结构中redis会在调用sync()方法时阻塞很长时间。记住，现在还没办法解决这个问题，即使在不同进程中进行调用也会block。
#
#使用如下配置可能会缓解这个问题，这样会在存储大数据或者BIGREWRITEAOF的时候不会在主进程中调用fsync()方法。
#
# 这表示，如果另外一个子进程在进行保存操作，redis的表现如同配置为‘appendfsync no’。
#在实际应用中，这表示在最坏的情景下（使用linux默认配置）可能会丢失30秒日志。
#
#如果你有特殊的情况可以配置为'yes'。但是配置为'no'是最为安全的选择。
no-appendfsync-on-rewrite no
#自动重写只增文件。
#redis可以自动盲从的调用‘BGREWRITEAOF’来重写日志文件，如果日志文件增长了指定的百分比。
#
#它是这样工作的：每次rewrite后redis会记录日志文件的大小。（如果重启后没有重写后的大小，就默认用日志文件大小）
#
# 这个基准日志大小和当前日志大小做比较。如果当前大小比指定的百分比，重写机制就会被触发。
#同时，你也要制定一个重写下线，用来避免增长百分比够了，但是日志文件还很小的情况。
#
#指定百分比为0可以注掉自动重写日志文件功能。
auto-aof-rewrite-percentage 100
auto-aof-rewrite-min-size 64mb

############################## 仅追加方式 ###############################

#默认情况下Redis会异步的将数据导出到磁盘上。这种模式对许多应用程序已经足够了，
#但是如果断电或者redis进程出问题就会导致一段时间内的更新数据丢失（取决与配置项）
#
#这种只增文件是可选的能够提供更好的体验的数据持久化策略。
#举个例子，如果使用默认的配置数据fsync策略，在服务器意外断电的情况下redis只会丢失一秒中内的更新数据，
#或者当redis进程出问题但操作系统运转正常时，redis只会丢失一个数据更新操作。
#
#AOF 和 RDB 持久化方式可以同时启动并且无冲突。
#如果AOF开启，启动redis时会加载aof文件，这些文件能够提供更好的保证。
#请在 http://redis.io/topics/persistence 获取更多数据持久化信息。

appendonly no

# 只增文件的文件名称。（默认是appendonly.aof）
# appendfilename appendonly.aof

#调用fsync()函数会通知操作系统真正将数据写入磁盘，而不是等待缓冲区中有更多数据。
#有些操作系统会将数据输出到磁盘，有些操作系统只是ASAP。
#
#redis支持三种不同的方式：
#
#no:不调用，之等待操作系统来清空缓冲区当操作系统要输出数据时。很快。
# always: 每次更新数据都写入仅增日志文件。慢，但是最安全。
# everysec: 每秒调用一次。折中。
#
#默认是每秒中一次，因为它往往是在速度和数据安全两者之间的折中选择。
#如果你可以接受让操作系统去自动清空缓存，你可以将这项配置降低到'no'(如果你可以接受一段时间的数据丢失，默认的rdb就足够了)，
#这完全取决与你。如果你想要一个更好的体验或者从相反的角度，使用'always'，这样会很慢，但是比'everysec'安全些。
#
#请在下面的文章中获取更多细节知识：
#  http://antirez.com/post/redis-persistence-demystified.html
#
#如果你不是很清楚这三项之间的区别，或者不知道哪种适合你的机器，就是用默认吧。

# appendfsync always
appendfsync always
# appendfsync no

#当AOF策略设置为'always'或者'everysec'的时候，后台的保存进程会进行很多磁盘I／O操作，
#在某些linux结构中redis会在调用sync()方法时阻塞很长时间。记住，现在还没办法解决这个问题，即使在不同进程中进行调用也会block。
#
#使用如下配置可能会缓解这个问题，这样会在存储大数据或者BIGREWRITEAOF的时候不会在主进程中调用fsync()方法。
#
# 这表示，如果另外一个子进程在进行保存操作，redis的表现如同配置为‘appendfsync no’。
#在实际应用中，这表示在最坏的情景下（使用linux默认配置）可能会丢失30秒日志。
# 
#如果你有特殊的情况可以配置为'yes'。但是配置为'no'是最为安全的选择。
no-appendfsync-on-rewrite no


#自动重写只增文件。
#redis可以自动盲从的调用‘BGREWRITEAOF’来重写日志文件，如果日志文件增长了指定的百分比。
# 
#它是这样工作的：每次rewrite后redis会记录日志文件的大小。（如果重启后没有重写后的大小，就默认用日志文件大小）
#
# 这个基准日志大小和当前日志大小做比较。如果当前大小比指定的百分比，重写机制就会被触发。
#同时，你也要制定一个重写下线，用来避免增长百分比够了，但是日志文件还很小的情况。
#
#指定百分比为0可以注掉自动重写日志文件功能。

auto-aof-rewrite-percentage 100
auto-aof-rewrite-min-size 64mb