AngularJS 03(控制器--模块开发)

基于单片机负载控制的无人机电气设备监测系统设计 为深入分析无人机电气设备的电子负载性能,实现对传输电子量的合理性监管与控制,设计基于单片机负载控制的无人机电气设备监测系统;利用电气信号发生电路,构建负载网络控制器与以太网模块运行所需的电气设备负载环境,借助PCB监控板建立PLC扩展负载模块与核心监控主机之间的物理连接关系,实现无人机电气设备监测系统的硬件执行环境搭建;在此基础上,通过STM32型单片机移植协议,确定无人机电气设备通信主机的现有组态形式,联合已设定的监控任务有线级条件,实现监测系统的软件执行环境搭建,完成基于单片机负载控制的无人机电气设备监 阅读详情

模块化开发
模块化开发就是把多个控制器注册在同一个模型里。

使用模块注册控制器
注入:DI
注入就是由外部在运行过程中把他的参数或者变量注入在程序里。
作用:提高程序运行的灵活性
模型注册的优势:

  • 通过模型集中管理
  • 通过模型注册降低耦合管理

高于1.2版本的AngularJS必须通过注入才能使用控制器,不能直接使用控制器。

1.注册控制器

这里写图片描述

//可以注入多个模型但是正常的单页面网站注册一个模型就够了
angular.module("appTest",[])//新建一个模型,模型名称为appTest
.controller("testCtrl",testController)//注入控制器,并且为控制器取别名,等到页面中使用控制器的时候,直接使用别名即可调用相应的控制器
.controller("helloCtrl",hellorController);//依赖注入,把方法当做值进行传递

2.模块引用
控制器放在前面,注册放在后面。

<script src="js/angular-1.4.0.js"></script>
<script src="script/controller.js"></script>
<script src="script/module.js"></script>
<div data-ng-app="appTest">
        <div data-ng-controller="testCtrl">
            {{msg}}
        </div>
</div>

MVC
M:数据 控制器 function
C:方法 控制器function

Moudule(模型):注入多个控制器

V:Templte 模板 (页面)

过滤器
大写、小写、日期、排序、筛选
价格:{{b.Price |currency:”¥”}}对价格进行规范化,保留两位小数,并且前面加上¥符号,默认情况,{{b.Price |currency}}加的是$符号
日期:{{b.PubDate |date:”yyyy年MM月dd日”}}
小写:{{b.Title |lowercase}}
大写:{{b.Author |uppercase}}
排序:先按作者排序,作者相同的情况下按照Title排序
<tr data-ng-repeat ="b in books|orderBy:['Author','Title']">

SAP 52策略测试简介 我们看下下层物料的需求,可以看到物料的需求已经跑出来了,我们双击计划订单,发现是没有办法将计划订单转换为采购申请的,这里是否还记得我们在前面创建主数据的时候独立集中我们填写的是1,所以物料继承了上层物料的策略,所以不能将计划订单进行转换。我们在前面测试了50策略按单生产,创建完计划独立需求后,通过主数据中的独立集中的字段控制下层物料是否能通过计划订单转成生产订单和采购订单。可以看到下层物料的计划订单就可以转采购申请了,到这里可以看到52策略和50策略的计划独立需求完全是一样的。 阅读详情

相关推荐

android10 部分机型(华为)无法正常更新安装app

android.content.ActivityNotFoundException: No Activity found to handle Intent { act=android.intent.action.VIEW dat=file://storage/emulated/0/文件夹名/***.apk typ=application/vnd.android.package-archive }

森森先生的博客 3929

angularJS 第一天 使用模型与控制器绑定数据

<!DOCTYPE html> <html> <head> <meta charset="utf-8"> <script src="http://cdn.static.runoob.com/libs/angular.js/1.4.6/angular.min.js"></script> </h...

weixin_30765319的博客 104

避坑指南:海康MV_CC_SetIntValue接口的7个典型报错解决方案

本文深度解析海康工业相机SDK中MV_CC_SetIntValue接口的典型报错,提供7个实战解决方案。针对MV_E_CALLORDER、MV_E_PARAMETER等高频错误码,从设备状态、参数值域、依赖关系等核心约束入手,给出清晰的诊断流程与根治代码,帮助开发者构建健壮的参数设置模块,提升开发效率。

y2z3a4b5c的博客 1082

从 AngularJS 模块定义说起

最近的项目使用了AngularJS作为主要前端框架,在使用模块时遇到一些有意思的问题,本文围绕模块的定义与加载的话题,小结一下我的体会。 首先,定义一个Angular模块(module)很简单,直接使用angular模块的module方法即可,如: var myApp = angular.module('myApp', []); 值得注意的是,module函数的第二个参数定义了该模块所依赖的

技术玄关 1万+

BIDS数据存储格式介绍与dcm2bids安装与使用

BIDS格式&dcm2bids安装与使用

machinelearning_er的博客 7323

【计算机三级-数据库技术】操作题大题(第1套)

从触发器的语法中可知,【1】处应该填写的是执行触发器的表,【2】处应该填写指定在表或视图上执行哪些数据修改语句时将激活触发器的关键字。使用FOR或AFTER选顶定义的触发器为后触发器,即只有在引发触发器执行的语句中的操作都已成功执行,并且所有的约束检查也成功完成后,才执行触发器。转换成新的独立的模式,模式的属性由联系本身的属性及两个实体的键构成,主键由两端实体的键组合而成。实体的转换:在从ER图转换为关系模式时,一个实体转换成一个关系模式,实体的属性就是关系模式的属性,实体的键就是关系的主键。

放纵小开爱的博客 1105

angularjs控制器

AngularJS 控制器 控制 AngularJS 应用程序的数据。 ng-controller 指令定义了应用程序控制器。 那么: 1、不同的控制器之间的数据是彼此隔离的 2、不同的控制器之间如何共享数据??不同的控制器间的数据传递的方法:方式1:借助于$rootScope借助于scope与scope与rootScope之间的关系。 把要共享的数据存在$rootScope,所有的子对象

chengzhang_jian的博客 366

别再乱点U盘里的.exe了!手把手教你彻底清除那个伪装成Usb Disk的蠕虫病毒

本文详细介绍了如何识别、清除和预防伪装成Usb Disk的蠕虫病毒。从识别感染迹象到安全备份文件,再到深度清理病毒残留和构建防护策略,提供了一套完整的U盘病毒解决方案。特别提醒用户注意U盘病毒的风险,并养成良好的使用习惯。

weixin_30496999的博客 687

AngularJS学习03 - 服务

AngularJS学习03 - 服务

qq_43350524的博客 694

倍福CX9020(WINCE 7)控制器使用方法和操作

CX9020系列是倍福控制器中较为经济的,操作系统为Windows Embedded Compact 7(简称WINCE7或WINEC7),相对高端控制器(WINES7以上系统),操作系统古老而简洁,上位机软件的编写困难很多,本文是笔者在使用过程中摸索的流程,旨在为CX9020系列的新用户提供参考,也可供其他CE系统的控制器参考。本文中大部分截图采用倍福中国的培训文档,这是由于笔者是在流程走通后再写这篇文章,不想再恢复出厂设置走一遍截图。因笔者在写这篇文章时使用倍福控制器经验并不丰富,难免有纰漏,请读者批评

weixin_41883890的博客 4288

金融监管压力测试场景生成

压力测试是一种评估金融资产或机构在极端市场条件下的表现和风险承受能力的方法。它通过模拟各种不利的市场情景,测试金融机构在这些情景下的财务状况和运营能力。压力测试的作用在于帮助金融机构识别潜在风险,评估应对策略,并制定应急预案。总结压力测试场景生成系统的开发过程和实现效果,强调其在金融监管中的重要性和应用价值。随着金融市场的发展,实时压力测试将越来越重要。未来,压力测试需要更加注重实时性和动态性,及时反映市场的变化。本文详细介绍了金融监管压力测试的重要性、核心概念、算法原理、系统架构以及实战案例。

AI天才研究院 1211

AngularJS 控制器中处理DOM事件

# AngularJS 控制器中处理DOM事件标签(空格分隔): AngularJS—AngularJS应用中的DOM事件可以在控制器中完成。AJ框架为我们提供了事件绑定指令,只需要在原生的avascript事件名称前增加ng-前缀,如 ng-click,ng-keyup…。下面是一个例子: 先设计一个用户登录的用户名输入:… 再设计密码输入:

u013985662的专栏 447

流体仿真软件:COMSOL Multiphysics二次开发_(11).COMSOL与外部软件的数据交换

通过上述方法,您可以实现 COMSOL Multiphysics 与外部软件的数据交换,从而更好地集成和分析仿真结果。无论是从文本文件导入数据,导出数据到 MATLAB,还是通过 API 和 COMSOL Server 实现实时通信,都能满足不同场景下的需求。希望这些内容对您在流体仿真领域的开发工作有所帮助。

kkchenjj的博客 1553

【03】AngularJS 简介

AngularJS简介 AngularJS 是一个JavaScript 框架。它可通过 <script> 标签添加到 HTML 页面。 AngularJS 通过 指令 扩展了 HTML,且通过 表达式 绑定数据到 HTML。 AngularJS 通过新的属性和表达式扩展了 HTML。 AngularJS 可以构建一个单一页面应用程序(SPAs:Si...

weixin_30872157的博客 107

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

Data-Structures-and-Algorithm-Analysis-in-Java.pdf

作者: Weiss, Mark A. 出版社: Addison Wesley Data Structures and Algorithm Analysis in Java is an “advanced algorithms” book that fits between traditional CS2 and Algorithms Analysis courses. In the old ACM Curriculum Guidelines, this course was known as CS7. This text is for readers who want to learn good programming and algorithm analysis skills simultaneously so that they can develop such programs with the maximum amo...

angularjs java mysql,AngularJS整合Springmvc、Spring、Mybatis搭建开发环境

最近想学习AngularJS的使用,网上搜了一圈后,折腾了半天解决bug后,成功使用AngularJS整合Springmvc、Spring、Mybatis搭建了一个开发环境。(这里Spring使用的版本是4.0.6,Mybatis版本是3.2.5,AngularJS的版本是1.0.3)第一步:创建一Maven项目,在pom.xml下添加需要的包4.0.0test.AngularSpringmvcM...

weixin_33835368的博客 235

复分析 阿尔福斯(Ahlfors) 第三版答案 英文

答案分为十章,有部分习题没有答案,全英文复分析阿尔福斯(Ahlfors) 第三版答案

angularJS指令

1 入门代码: <!DOCTYPE html> <html lang="en"> <head> <meta charset="UTF-8"> <title>入门demo</title> <script type="text/javascript" src="js/angular.min.js"&g...

陈福国的博客 242

老版QQ原生表情gif动态

这是老版的QQ表情,不过全是动态的的,Windows照片查看器是不会动的,可以右击用浏览器打开查看,再说一遍是老版的,只是分享给宁愿用老版也要动态的人。

AngularJS 笔记1

2017-03-23 本文更新链接:http://www.cnblogs.com/daysme/p/6606805.html 什么是 angularjs 2009年有两个外国人创建,后由谷歌收购并开源。他的特点有MVC、模块化、双向数据绑定、语义化标签、依赖注入等。AngularJS主要考虑的是构建CRUD应用,90%的应用都是CRUD应用,游戏,图形界...

dgce32897的博客 122

AngularJS Day03

什么是指令 指令directive是AngularJS的核心之一 包括: Ø 用于扩展HTML元素、属性的指令 Ø 执行特定功能的指令 Ø 自定义指令 内置指令基本上都是以ng-开头 属性指令 ng-href:代替a标记的href属性 ng-src:代替img等标记的src属性 ng-disabled:设置表单元素是否可用 ng-checked:设置选项是否选中 ng-readonly:设置...

天码星空 190

angularjs java mysql_AngularJS整合Springmvc、Spring、Mybatis搭建开发环境

最近想学习AngularJS的使用,网上搜了一圈后,折腾了半天解决bug后,成功使用AngularJS整合Springmvc、Spring、Mybatis搭建了一个开发环境。(这里Spring使用的版本是4.0.6,Mybatis版本是3.2.5,AngularJS的版本是1.0.3)第一步:创建一Maven项目,在pom.xml下添加需要的包xsi:schemaLocation="http://...

weixin_32273559的博客 174

电商三十三、控制器继承

①控制器继承 把控制器里面的一些共有的内容抽离出来,再继承该抽离出来的 共有的部分。这就是控制器的继承。即继承共有通用的部分。 将brandController.js文件里面的共性的抽取出来,但含有service层的内容的就不抽取出来。 brandController.js文件的内容为: app.controller('brandController',function($s...

lbh19630726的博客 189

AngularJS 03

@*方法一*@ 鼠标移入移出 鼠标移入移出方法2 var ng = angular.module("Ng", []); ng.controller("controllers", function ($scope) { $scope.Loding

zhanglong_longlong的专栏 313

AngularJS_03_概念概述

在创建第一个应用程序之前,你需要理解Angular中的一些概念。 在本章,通过一个简单的例子,你可以快速接触Angular中所有重要的部分。 但是,不会花时间去解释细节,而是着重于帮助你建立一个全局性的“概观”。 概念 说明 模板(Template) 带有Angular扩展标记的HTML 指令(Directive) 用于通过自定义属性和元素扩展HTML的行为 模...

pre_eminent的JAVA学习园地 628

angularjs简单使用批量删除

新的 angular.module("zhangapp",[]) .controller("demoC",function($scope){ $scope.users=[{ state:false, id:1, name:"曹操", age:5, pass:123456, rank:1, data:new Date("2017-10-01 10:00:00") },{

zhang1223665986的博客 372

从0开始学angularjs-笔记03

大家好,今天上班第一天,可能大家都不是很想上班吧,我也是一样啦~~~不想上班就来继续写我的angualrjs教程,造福大家吧!! 今天的主要讲解部分有以下几点:1.演示一个完整的项目结构 2.$scope的含义 3.模块化和依赖注入。 一.演示一个完整的项目结构。 下面的所有这些代码,都是转载于@大漠穷秋 老师的。我转载来之后放到了github上,大家可以去这个链接看...

weixin_30799995的博客 121

angularJs购物汇总

lang="en">     charset="UTF-8">   Title     *{   margin: 0;   padding: 0;   }   body   {   width: 1600px;   margin: 0 auto;

Arrogant——玖零 313

AngularJS开发指南

AngularJS开发指南 中文教程 AngularJS开发指南01:AngularJS简介 AngularJS开发指南02:引导程序 AngularJS开发指南03:HTML编译器  AngularJS开发指南04:核心概览  AngularJS开发指南05:指令

tinny77的专栏 839
上一篇: AngularJS 02(控制器01)
下一篇: AngularJS 04(监听、指令)
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值