Taking Responsibility for Your Own Learning

In college, learning is mainly up to you. Instructors function as guides. They define and explain what is to be learned, but you do the learning. Class time is far shorter than in high school. Often there isn’t enough time to provide drills, practices, and reviews of factual course content. Instead, college class time is used primarily to introduce content that is to be learned and to discuss ideas. Instructors expect you to learn the material and to be prepared to discuss it in class. When, where, and how you learn are your decisions. The following suggestions are given to help you in making these decisions.

Focus on concepts

Facing and endless amount of facts, rules, definitions, and principles, many students “can’t see the forest for the tress”, and become robot learners- memorizing facts from texts and lectures, then recalling them on exams and quizzes. In fact, you are expected to go beyond facts to analysis: to see the larger, more important concepts. Keep these question in mind as your read and study:

Ø       Why do need to know this information?

Ø       Why is it quite helpful?

Ø       What principle does it illustrate?

Ø       How can’t I use this information?

Focus on ideas, not right answers

Do not always expect your answers to be either right or wrong. For many question, there is no one right answer. You are expected to think and to provide a reasoned, logical, consistent response using information acquired through you reading.

Evaluate new ideas

Throughout college you will continually meet with new ideas. Try to avoid accepting or refusing a new idea until you have really considered it.

资料来源:NCEIC 

基于STM32设计的数字示波器全套资料(原理图、PCB图、源代码) 硬件平台: 主控器:STM32F103ZET6 64K RAM 512K ROM 屏幕器:SSD1963 分辨率:480*272 16位色 触摸屏:TSC2046 模拟电路: OP-TL084 OP-U741 SW-CD4051 CMP-LM311 PWR-LM7805 -LM7905 -MC34063 -AMS1117-3.3 DRT-ULN2003 6.继电器:信号继电器 7.电源:DC +12V 软件平台: 开发环境:RealView MDK-ARM uVision4.10 C编译器:ARMCC ASM编译器:ARMASM 连机器:ARMLINK 实时内核:UC/OS-II 2.9实时操作系统 GUI内核:uC/GUI 3.9图形用户接口 底层驱动:各个外设驱动程序 数字示波器功能: 波形发生器:使用STM32一路DA实现正弦,三角波,方波,白噪声输出。 任意一种波形幅值在0-3.3V任意可调、频率在一定范围任意可调、方波占空比可调。调节选项可以通过触摸屏完成设置。 SD卡存储: SD卡波形存储输出,能够对当前屏幕截屏,以JPG格式存储在SD卡上。能够存储1S内的波形数据,可以随时调用查看。 数据传输:用C#编写上位机,通过串口完成对下位机的控制。(1)实现STOP/RUN功能(2)输出波形电压、时间参数(3)控制截屏(4)控制波形发生器(5)控制完成FFT(6)波形的存储和显示 图形接口: UCGUI 水平扫速: 250 ns*、500ns、1μs、5 μs、10μs、50μs、500 μs、5ms 、50ms 垂直电压灵敏度:10mV/div, 20mV/div, 50mV/div, 0.1V/div, 0,2V/div, 0.5V/div, 1V/div,2V/
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值