SWAP分区创建脚本

shell脚本创建分区、格式化分区、转换分区 bin/bash#添加一个函数检查用户是否操作sda,如果用户操作sda直接退出脚本thenecho "不能对磁盘sda进行操作"exit 1fi#创建分区函数local size=$1 #获取第一个参数:分区大小local xnum=$2 #获取第二个参数,分区序号local one=$3 获取第三个参数,用于判断分区是否为第一个分区。 阅读详情
#!/bin/bash
echo"n
p
1


$1
t
82
wq"|fdisk /dev/vdb
partprobe
mkswap $2
swapon -a $2
echo "/dev/vdb1 swap swap  defaults 0 0" >> /etc/fstab


批量检测并关闭机器swap分区脚本 前言:构造模拟环境 dd if=/dev/zero of=/swapfile1 bs=1M count=1024 mkswap /swapfile1 swapon /swapfile1 /etc/fstab加入: /swapfile1 swap swap defaults 0 0 一、 原始状态,没有/swapfile1情形 1、 2、执行脚本输出   二、有/... 阅读详情

相关推荐

ubuntu-swap:创建交换分区的脚本

ubuntu-swap 创建交换分区的脚本 curl -L https://github.com/feliperuhland/ubuntu-swap/raw/master/create_swap.sh | sh 灵感来自数字海洋文章

创建swap分区脚本

脚本:creat_swap.sh 1 #!/bin/bash 2 fdisk $1 <<end 3 n 4 $2 5 $3 6 7$4 8 t 9 82 10 wq 11partprobe 12mksawp $1$3 13 echo $1$3 swap swap de...

weixin_33940102的博客 152

对工时评估的思考:当AI颠覆了coding效率

在AI时代,“人日”作为软件工时度量衡已然失效。开发的价值核心正从“编码实现”转向“深度思考”与“精准沟通”——即如何将人类的模糊需求精确地传达给AI。当最有价值的“思想工作”变得最难量化时,传统的项目管理范式随之动摇。我们必须超越对过程的算计,开始探索衡量思想、沟通与业务价值的新标尺。

架构师刘7的博客 1017

练习 用脚本实现创建swap分区

用脚本实现创建swap分区 并开机自动激活!/bin/bashfdisk 1<<endn1 << end n 2$3 t 82 wq end partprobe mkswap /dev/vdb1 swapon -a /dev/vdb1 echo /dev/vdb1 swap swap defaults 0 0 >>/etc/fstab

Error_404notFound的博客 389

Ubuntu 22.04蓝牙开关秒关?别慌,可能是这个Intel固件文件在搞鬼

本文深入解析Ubuntu 22.04蓝牙开关秒关问题,指出Intel固件文件缺失是常见原因,并提供详细修复方案。通过确认硬件型号、检查固件文件及智能替代方案,帮助用户快速解决蓝牙故障,提升系统稳定性。

weixin_30247307的博客 758

ASReview:基于主动学习的AI文献筛选工具,提升科研效率

主动学习是机器学习的一个重要分支,其核心原理是让算法能够主动选择最有价值的数据进行标注,从而以更低的成本获得更好的模型性能。这一技术通过人机协作的闭环流程,显著提升了数据标注和模型训练的效率和精度。在工程实践中,主动学习尤其适用于数据标注成本高昂或数据类别不平衡的场景,例如医学影像分析、自然语言处理中的文本分类以及推荐系统的冷启动问题。通过优先标注模型最不确定的样本,它能够有效解决传统机器学习面临的冷启动和数据稀疏性挑战。本文聚焦的ASReview项目,正是将主动学习原理应用于系统文献综述这一具体场景,通过

weixin_28725959的博客 432

创建swap分区的脚本

脚本内容:vim  #!/bin/bash fdisk  $1 n p $2 t 82 wq end partprobe 加上可执行权限:chmod +x /mnt/ 执行脚本:/mnt/create_swap.sh   /dev/vdb +500M

sumin1118的博客 353

Matlab信号处理

Matlab信号处理 需要安装的APP: Signal Analyzer app:提供一个可以在时域和频域可视化、测量、分析和比较信号的工具; Filter Builder和Filter Designer app:可以很方便通过下拉菜单和填写参数的方式来设计和分析数字滤波器; 对于小波分析,Matlab提供了: 1.Wavelet Signal Denoise app:利用离散小波变换对信号去噪; 2.Signal Multiresolution Analyzer app:对信号进行多分辨率的分析和可视化

Huichin_Min的博客 4399

脚本建立新的swap分区

要求书写脚本实现:建立新的swap区 实现开机swap区自己激活 脚本内容: #!/bin/bash fdisk $1 n $2 $3 t b8 wq end partprobe 实现开机自动激活: 修改配置文件/etc/fstab # # /etc/fstab # Created by anaconda on Wed May  7 01:22:57 20

Lori_jishumeng123的博客 420

Open3D 体素下采样【2026最新版】

体素滤波,博客长期更新,本文最近更新时间为:2026年4月11日。

点云侠的博客 37万+

【100%通过率】华为od机试C卷【贪吃的猴子】Java&Go 实现

一只贪吃的猴子,来到一个果园,发现许多串香蕉排成一行,每串香蕉上有若干根香蕉。每串香蕉的根数由数组numbers给出。猴子获取香蕉,每次都只能从行的开头或者未尾获取,并且只能获取N次,求猴子最多能获取多少根香蕉。第一次获取香蕉为行的开头,第二次获取为行的末尾,因此最终根数为4+3 =7。全部获取所有的香蕉,因此最终根数为1+2+3 = 6。第二行为数组numbers的值每个数字通过空格分开。1:简单题目,两个指针分别指向头尾,逐个对比即可。第一行为数组numbers的长度。第三行输入为N,表示获取的次数。

MISAYAONE的博客 1439

linux基础swap自动创建脚本

linux基础swap自动创建脚本

qinwunan的博客 653

输入失调电压Vos你搞明白了吗

输入失调电压Vos与温度

HW-BASE的博客 2417

swap分区脚本

编辑以.sh结尾的文件如下 #!/bin/bash fdisk $1 n                            $2                                                                                   =========>>建立swap分区   $3 t

magic__xu的博客 331

R数据分析:潜在转化分析LTA的做法和解释(一)

之前给大家写了很多潜在类别分析的教程Mplus教程:如何做潜在类别分析LCAR数据分析:用R语言做潜类别分析LCAMplus数据分析:潜在类别分析(LCA)流程(详细版)R数据分析:再写潜在类别分析LCA的做法与解释,今天继续给大家拓展一步。 今天要介绍的就是潜在转换分析,这个东西就是LCA的纵向版本。是一个专门用来研究质变的统计技巧。有一句话叫做量变起质变,你怎么知道质变到底发生没有?就用潜在转换分析。 Latent transition analysis is an extension of...

Codewar的博客 7704

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

create_swap.sh脚本的编写

create_swap.sh脚本的编写 *)执行脚本后系统会自动建立新的swap *)这个自动建立的swap分区需要开机自动激活

houxr的专栏 305

最新的sdio 4.0 spec 协议标准 带书签 高清完整PDF版

Part-E1-SDIO-Specification-Ver4.00-Final-120220.pdf:最新的sdio 4.0 spec 协议标准 带书签 高清完整PDF版,包括SDIO 接口的外设,SDIO 接口官方协议等。

脚本执行新建swap分区

################脚本执行新建swap分区######################### 1,执行脚本后,系统会自动建立新swap 2,这个自动建立的swap分区需要开机自动激活     [root@localhost ~]# vim create_swap.sh [root@localhost ~]# chmod +x  create_swap.sh [root@

dwly12345的博客 296

IEM模型,地表粗糙度模拟

利用微波反演土壤水分时候,利用IEM模型可以实现对随机地表的模拟

复分析 阿尔福斯(Ahlfors) 第三版答案 英文

答案分为十章,有部分习题没有答案,全英文复分析阿尔福斯(Ahlfors) 第三版答案

Linux 配置虚拟内存( swap 交换区 )

查看内存使用情况(单位。查看内存使用情况(单位。

www.zoujc.com 的博客 1239

linuxx初级学习之swap分区练习题

编写脚本swap.sh要求如下 执行脚本后系统分会自动建立新swap,这个自动建立的新swap分区必须在重起后自动激活 [root@localhost ~]# vim /bin/swap.sh ##在配置文件中写入自动建立命令 #!/bin/bash fdisk $1<<end ##分区位置 n

csdn066的博客 449

脚本实现自动建立swap分区

编写脚本 create_swap.sh ,要求如下: *执行脚本后系统会自动建立新swap *这个自动建立的swap分区需要开机自动激活   [root@localhost ~]# vim /bin/create_swap.sh 1 #!/bin/bash 2 fdisk $1 3 n 4 $2 5 $3 6 7 $4 8 t 9 82 10 wq 11 end

HnSoi的博客 676

swap 脚本

编写脚本,执行该脚本后,系统会自动建立新的swap,且这个建立的swap分区要自动激活 #!/bin/bash fdisk $1 << end n $2$3 t82 wq end partprobe ####同步分区表 mkswap /dev/vdb1 ####格式化 swapon -a /dev/vdb #####激活swap分区 echo /dev/vdb1

xiaojun_Fairy的博客 685

脚本作业

编写脚本:create_swap.sh    要求如下: *执行脚本后系统会自动建立新swap分区 *这个自动建立的swap分区需开机自动激活

WY_mini的博客 517

脚本create_swap.sh

编写脚本  creat_swap.sh 要求: **执行脚本后系统会自动建立新swap **这个自动建立的swap分区需要开机自动激活         [root@localhost ~]# vim /bin/create_swap.sh                   [root@localhost ~]# vim /etc/fstab [root@loc

helloPucca的博客 822

AC9刷梅林安装entware usb挂载 u盘分区使用swap脚本

#!/bin/sh sleep 30 mkdir /tmp/opt umount /dev/sda2 mount /dev/sda2 /opt swapon /dev/sda1 sda1作为swap,sda2作为opt存放程序. 配合entware使用

hhyygg2009的博客 6706

Linux 为硬盘抹除原有分区,并重新创建分区

#!/bin/bash echo 'initial disk...' echo -e "\033[32mWanning...\033[0m" #\033[32m。。。\033[0m 字体颜色块 fdisk -l 2>/dev/null | grep '^Disk /dev/[sh][a-z]' | awk -F: '{print $1}' read -p "input yo...

houzixuena的博客 2222
上一篇: [转]并发和并行的区别
下一篇: SElinux的管理
parameter_
博客等级 码龄10年 24粉丝 102原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值