3D打印：单片机模拟器

onj123

于 2024-09-17 21:24:42 发布

阅读量577

点赞数 5

CC 4.0 BY-SA版权

分类专栏： 3D打印文章标签： 3D打印

本文链接：https://blog.youkuaiyun.com/onj123/article/details/142319162

模拟器

安装simulavr

sudo apt-get install simulavr

还需python版，pip3 install pysimulavr没有源，用源码安装
git clone git://git.savannah.nongnu.org/simulavr.git
cd simulavr/
sudo apt install g++ make cmake swig rst2pdf help2man texinfo
# make cfgclean python debian 编译deb包
make python
make build
cd build/pysimulavr/
sudo python3 setup.py install

编译下位机固件elf

cd home/lhgcs/klipper
make menuconfig
选atmega644p
make生成klipper.elf
运行
/home/lhgcs/klipper/scripts/avrsim.py /home/lhgcs/klipper/out/klipper.elf

配置串口

‵‵‵
[mcu]
#serial: /dev/serial/by-id/
serial: /tmp/pseudoserial
‵‵‵

添加权限

‵‵‵
lhgcs@lhgcs:~$ ll /tmp/pseudoserial
lrwxrwxrwx 1 lhgcs lhgcs 10 Aug 10 23:51 /tmp/pseudoserial -> /dev/pts/2
lhgcs@lhgcs:~$ ll /dev/pts/2
crw–w---- 1 lhgcs tty 136, 2 Aug 10 23:51 /dev/pts/2
lh