cisco ASA5510防火墙配置

本文档提供详细的ASA5510防火墙配置步骤,包括通过console连接、设置主机名与时区、内外部接口配置、用户认证及VPNs等关键操作。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

ASA5510 配置手册
使用console连接线登录方法
1.使用cisco专用com连接线,连接设备的console口和计算机com口

2.使用超级终端或secureCRT软件连接设备
  串行选项: 波特率:9600    数据位:8    奇偶校验:无  停止位:1   数据流控制: RTS/CTS

3.输入en,提示输入密码
  show run 查看设备当前配置
  configure ter 进入配置模式,输入前提示 设备名(config)#

 

1. 设置主机名:
<config>#hostname szhndasa
2. 设置时区:
szhndasa<config>#clock timezone EST 7
3. 设置时钟:
Szhndasa#clock set 15:45:30 28 FEB 2008
4. 配置内接口 IP
Szhndasa<config>#int Ethernet 0/0
Szhndasa<config-if>#nameif inside
Szhndasa<config-if>#security-level 100
Szhndasa<config-if>#ip address 192.168.55.254 255.255.255.0
5 配置外部接口IP
Szhndasa<config>#int Ethernet 0/1
Szhndasa<config-if>#nameif outside
Szhndasa<config-if>#security-level 0
Szhndasa<config-if>#ip address 210.X.X.X 255.255.255.248
6.配置用户名和密码
Szhndasa<config>#username admin password ********* encrypted
privilege 15 注:15 表示有最高权限
7.配置HTTP 和TELNET
Szhndasa<config>#aaa authentication telnet console LOCAL
Szhndasa<config>#http server enable
Szhndasa<config>#http 192.168.55.0 255.255.255.0 inside
Szhndasa<config>#telnet 192.168.55.0 255.255.255.0 inside
8.配置site to site vpn
crypto map outside_map 20 match address outside_cryptomap_20_1
crypto map outside_map 20 set pfs
crypto map outside_map 20 set peer 210.75.1.X
crypto map outside_map 20 set transform-set ESP-3DES-SHA
crypto map outside_map 20 set nat-t-disable
crypto map outside_map interface outside
注:还可通过http 方式用ASDM 管理软件图形化配置ASA

评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

offbye

你的鼓励将是我创作的最大动力

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付:¥1
获取中
扫码支付

您的余额不足,请更换扫码支付或充值

打赏作者

实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值