oot@srv771551:~# # 安装PCI工具集
sudo apt inst
all pciutils mesa-utils -y
# 检测显卡详细信息
sudo lspci -v -s $(lspci | grep VGA | cut -d' ' -f1)
sudo glxinfo -B | grep -E "OpenGL|renderer"
# 检测帧缓冲状态
sudo fbset -i
Reading package
lists... Done
Building dependency tree... Done
Reading state information... Done
pciutils is already the newest version (1:3.10.0-2build1).
pciutils set to manu
ally inst
alled.
mesa-utils is already the newest version (9.0.0-2).
0 upgraded, 0 newly inst
alled, 0 to remove and 0 not upgraded.
lspci: option requires an argument -- 's'
Usage: lspci [<switches>]
Basic display modes:
-mm Produce machine-readable output (single -m for an obsolete format)
-t Show bus tree
Display options:
-v Be verbose (-vv or -vvv for higher verbosity)
-k Show kernel
drivers handling each device
-x Show hex-dump of the standard part of the config space
-xxx Show hex-dump of the whole config space (dangerous; root only)
-xxxx Show hex-dump of the 4096-byte extended config space (root only)
-b Bus-centric view (addresses and IRQ's as seen by the bus)
-D Always show domain numbers
-P Display bridge path in addition to bus and device number
-PP Display bus path in addition to bus and device number
Resolving of device ID's to names:
-n Show numeric ID's
-nn Show both textual and numeric ID's (names & numbers)
-q Query the PCI ID database for unknown ID's
via DNS
-qq As above, but re-query loc
ally cached entries
-Q Query the PCI ID database for
all ID's
via DNS
Selection of devices:
-s [[[[<domain>]:]<bus>]:][<slot>][.[<func>]] Show only devices in selected slots
-d [<vendor>]:[<device>][:<class>] Show only devices with specified ID's
Other options:
-i <
file> Use specified ID database instead of /usr/share/misc/pci.ids.gz
-p <
file> Look up kernel modules in a given
file instead of default modules.pcimap
-M Enable `bus mapping' mode (dangerous; root only)
PCI access options:
-A <method> Use the specified PCI access method (see `-A help' for a
list)
-O <par>=<val> Set PCI access parameter (see `-O help' for a
list)
-G Enable PCI access debugging
-H <mode> Use direct hardware access (<mode> = 1 or 2)
-F <
file> Read PCI configuration dump from a given
file
Error: unable to open display :0
sudo: fbset:
command not found
root@srv771551:~#
本文详细介绍了Windows系统下fsutil命令的使用方法及其选项。fsutil命令可以用来获取和管理文件系统的相关信息，包括但不限于文件系统行为控制、卷管理、硬链接管理等。本文还特别讲解了如何通过fsutil fsinfo来查询不同类型的驱动器信息、卷信息及NTFS特有的卷信息等内容。
扫一扫
488
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
