微软ping程序源代码完整版

易语言-易语言ping命令 易语言-易语言ping命令源码 立即下载
 

微软ping程序源代码完整版

作者:侯志江

编写自己的一个ping程序,可以说是许多人迈出网络编程的第一步吧!!这个ping程序的源代码经过我的修改和调试,基本上可以取代windows中自带的ping程序. 各个模块后都有我的详细注释和修改日志,希望能够对大家的学习有所帮助!!

/*  本程序的主要源代码来自MSDN网站, 笔者只是做了一些改进和注释! 另外需要注意的是在Build之前,必须加入ws2_32.lib库文件,否则会提示"error LNK2001:"的错误!*/

/******************************************************************************/
| Version 1.1 修改记录:                                                                                                              |
|    <1> 解决了socket阻塞的问题,从而能够正确地处理超时的请求!                                                        |
|----------------------------------------------------------------------------------------------------|
| Version 1.2 修改记录:                                                                                                              |
|    <1> 增加了由用户控制发送ICMP包的数目的功能(即命令的第二个参数).                                              |   
|    <2> 增加了对ping结果的统计功能.                                                                                           |
/******************************************************************************/

#pragma pack(4)

#include
#include
#include

#define ICMP_ECHO 8
#define ICMP_ECHOREPLY 0

#define ICMP_MIN 8 // minimum 8 byte icmp packet (just header)

/* The IP header */
typedef struct iphdr {
unsigned int h_len:4; // length of the header
unsigned int version:4; // Version of IP
unsigned char tos; // Type of service
unsigned short total_len; // total length of the packet
unsigned short ident; // unique identifier
unsigned short frag_and_flags; // flags
unsigned char ttl;
unsigned char proto; // protocol (TCP, UDP etc)
unsigned short checksum; // IP checksum

unsigned int sourceIP;
unsigned int destIP;

}IpHeader;

//
// ICMP header
//
typedef struct icmphdr {
BYTE i_type;
BYTE i_code; /* type sub code */
USHORT i_cksum;
USHORT i_id;
USHORT i_seq;
/* This is not the std header, but we reserve space for time */
ULONG timestamp;
}IcmpHeader;

#define STATUS_FAILED 0xFFFF
#define DEF_PACKET_SIZE    32
#define DEF_PACKET_NUMBER  4    /* 发送数据报的个数 */
#define MAX_PACKET 1024

#define xmalloc(s) HeapAlloc(GetProcessHeap(),HEAP_ZERO_MEMORY,(s))
#define xfree(p) HeapFree (GetProcessHeap(),0,(p))

void fill_icmp_data(char *, int);
USHORT checksum(USHORT *, int);
int decode_resp(char *,int ,struct sockaddr_in *);

void Usage(char *progname){

fprintf(stderr,"Usage:/n");
fprintf(stderr,"%s [number of packets] [data_size]/n",progname);
fprintf(stderr,"datasize can be up to 1Kb/n");
ExitProcess(STATUS_FAILED);

}
int main(int argc, char **argv){

WSADATA wsaData;
SOCKET sockRaw;
struct sockaddr_in dest,from;
struct hostent * hp;
int bread,datasize,times;
int fromlen = sizeof(from);
int timeout = 1000;
int statistic = 0;  /* 用于统计结果 */ 
char *dest_ip;
char *icmp_data;
char *recvbuf;
unsigned int addr=0;
USHORT seq_no = 0;

if (WSAStartup(MAKEWORD(2,1),&wsaData) != 0){
fprintf(stderr,"WSAStartup failed: %d/n",GetLastError());
ExitProcess(STATUS_FAILED);
}

if (argc <2 ) {
Usage(argv[0]);
}
sockRaw = WSASocket(AF_INET,SOCK_RAW,IPPROTO_ICMP,NULL, 0,WSA_FLAG_OVERLAPPED);

//
//注:为了使用发送接收超时设置(即设置SO_RCVTIMEO, SO_SNDTIMEO),
//    必须将标志位设为WSA_FLAG_OVERLAPPED !
//

if (sockRaw == INVALID_SOCKET) {
fprintf(stderr,"WSASocket() failed: %d/n",WSAGetLastError());
ExitProcess(STATUS_FAILED);
}
bread = setsockopt(sockRaw,SOL_SOCKET,SO_RCVTIMEO,(char*)&timeout,
sizeof(timeout));
if(bread == SOCKET_ERROR) {
fprintf(stderr,"failed to set recv timeout: %d/n",WSAGetLastError());
ExitProcess(STATUS_FAILED);
}
timeout = 1000;
bread = setsockopt(sockRaw,SOL_SOCKET,SO_SNDTIMEO,(char*)&timeout,
sizeof(timeout));
if(bread == SOCKET_ERROR) {
fprintf(stderr,"failed to set send timeout: %d/n",WSAGetLastError());
ExitProcess(STATUS_FAILED);
}
memset(&dest,0,sizeof(dest));

hp = gethostbyname(argv[1]);

if (!hp){
addr = inet_addr(argv[1]);
}
if ((!hp) && (addr == INADDR_NONE) ) {
fprintf(stderr,"Unable to resolve %s/n",argv[1]);
ExitProcess(STATUS_FAILED);
}

if (hp != NULL)
memcpy(&(dest.sin_addr),hp->h_addr,hp->h_length);
else
dest.sin_addr.s_addr = addr;

if (hp)
dest.sin_family = hp->h_addrtype;
else
dest.sin_family = AF_INET;

dest_ip = inet_ntoa(dest.sin_addr);

//
//  atoi函数原型是: int atoi( const char *string );
//  The return value is 0 if the input cannot be converted to an integer !
//
if(argc>2)
{
 times=atoi(argv[2]);
 if(times == 0)
  times=DEF_PACKET_NUMBER;
}
else
    times=DEF_PACKET_NUMBER;

if (argc >3)
{
 datasize = atoi(argv[3]);
    if (datasize == 0)
        datasize = DEF_PACKET_SIZE;
 if (datasize >1024)   /* 用户给出的数据包大小太大 */
 {
  fprintf(stderr,"WARNING : data_size is too large !/n");
  datasize = DEF_PACKET_SIZE;
 }
}
else
    datasize = DEF_PACKET_SIZE;

datasize += sizeof(IcmpHeader);

icmp_data = (char*)xmalloc(MAX_PACKET);
recvbuf = (char*)xmalloc(MAX_PACKET);

if (!icmp_data) {
fprintf(stderr,"HeapAlloc failed %d/n",GetLastError());
ExitProcess(STATUS_FAILED);
}


memset(icmp_data,0,MAX_PACKET);
fill_icmp_data(icmp_data,datasize);

//
//显示提示信息
//
fprintf(stdout,"/nPinging %s ..../n/n",dest_ip);


for(int i=0;i{
int bwrote;

((IcmpHeader*)icmp_data)->i_cksum = 0;
((IcmpHeader*)icmp_data)->timestamp = GetTickCount();

((IcmpHeader*)icmp_data)->i_seq = seq_no++;
((IcmpHeader*)icmp_data)->i_cksum = checksum((USHORT*)icmp_data,datasize);

bwrote = sendto(sockRaw,icmp_data,datasize,0,(struct sockaddr*)&dest,sizeof(dest));
if (bwrote == SOCKET_ERROR){
if (WSAGetLastError() == WSAETIMEDOUT) {
printf("Request timed out./n");
continue;
}
fprintf(stderr,"sendto failed: %d/n",WSAGetLastError());
ExitProcess(STATUS_FAILED);
}
if (bwrote < datasize ) {
fprintf(stdout,"Wrote %d bytes/n",bwrote);
}
bread = recvfrom(sockRaw,recvbuf,MAX_PACKET,0,(struct sockaddr*)&from,&fromlen);
if (bread == SOCKET_ERROR){
if (WSAGetLastError() == WSAETIMEDOUT) {
printf("Request timed out./n");
continue;
}
fprintf(stderr,"recvfrom failed: %d/n",WSAGetLastError());
ExitProcess(STATUS_FAILED);
}
if(!decode_resp(recvbuf,bread,&from))
 statistic++; /* 成功接收的数目++ */
Sleep(1000);

}
 
/*
Display the statistic result
*/
fprintf(stdout,"/nPing statistics for %s /n",dest_ip);
fprintf(stdout,"    Packets: Sent = %d,Received = %d, Lost = %d (%2.0f%% loss)/n",times,
     statistic,(times-statistic),(float)(times-statistic)/times*100);


WSACleanup();
return 0;

}
/*
The response is an IP packet. We must decode the IP header to locate
the ICMP data
*/
int decode_resp(char *buf, int bytes,struct sockaddr_in *from) {

IpHeader *iphdr;
IcmpHeader *icmphdr;
unsigned short iphdrlen;

iphdr = (IpHeader *)buf;

iphdrlen = (iphdr->h_len) * 4 ; // number of 32-bit words *4 = bytes

if (bytes < iphdrlen + ICMP_MIN) {
printf("Too few bytes from %s/n",inet_ntoa(from->sin_addr));
}

icmphdr = (IcmpHeader*)(buf + iphdrlen);

if (icmphdr->i_type != ICMP_ECHOREPLY) {
fprintf(stderr,"non-echo type %d recvd/n",icmphdr->i_type);
return 1;
}
if (icmphdr->i_id != (USHORT)GetCurrentProcessId()) {
fprintf(stderr,"someone else's packet!/n");
return 1;
}
printf("%d bytes from %s:",bytes, inet_ntoa(from->sin_addr));
printf(" icmp_seq = %d. ",icmphdr->i_seq);
printf(" time: %d ms ",GetTickCount()-icmphdr->timestamp);
printf("/n");
return 0;

}


USHORT checksum(USHORT *buffer, int size) {

unsigned long cksum=0;

while(size >1) {
cksum+=*buffer++;
size -=sizeof(USHORT);
}

if(size) {
cksum += *(UCHAR*)buffer;
}

cksum = (cksum >> 16) + (cksum & 0xffff);
cksum += (cksum >>16);
return (USHORT)(~cksum);
}
/*
Helper function to fill in various stuff in our ICMP request.
*/
void fill_icmp_data(char * icmp_data, int datasize){

IcmpHeader *icmp_hdr;
char *datapart;

icmp_hdr = (IcmpHeader*)icmp_data;

icmp_hdr->i_type = ICMP_ECHO;
icmp_hdr->i_code = 0;
icmp_hdr->i_id = (USHORT)GetCurrentProcessId();
icmp_hdr->i_cksum = 0;
icmp_hdr->i_seq = 0;

datapart = icmp_data + sizeof(IcmpHeader);
//
// Place some junk in the buffer.
//
memset(datapart,'E', datasize - sizeof(IcmpHeader));

}

/******************* 附: ping命令执行时显示的画面 ***************/
*  C:/Documents and Settings/houzhijiang>ping 236.56.54.12               *
*                                                                                                      *
*  Pinging 236.56.54.12 with 32 bytes of data:                                      *
*                                                                                                      *
*  Request timed out.                                                                         *
*  Request timed out.                                                                         *
*  Request timed out.                                                                         *
*  Request timed out.                                                                         *
*                                                                                                      *
*  Ping statistics for 236.56.54.12:                                                      *
*     Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),                  *
*                                                                                                      *
/*********************************************************/

/*********************************************************/
*  C:/Documents and Settings/houzhijiang>ping 127.0.0.1                    *
*                                                                                                     *
*  Pinging 127.0.0.1 with 32 bytes of data:                                          *
*                                                                                                     *
*  Reply from 127.0.0.1: bytes=32 time<1ms TTL=128                        *
*  Reply from 127.0.0.1: bytes=32 time<1ms TTL=128                        *
*  Reply from 127.0.0.1: bytes=32 time<1ms TTL=128                        *
*  Reply from 127.0.0.1: bytes=32 time<1ms TTL=128                        *
*                                                                                                     *
*  Ping statistics for 127.0.0.1:                                                          *
*     Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),                    *
*  Approximate round trip times in milli-seconds:                                 *
*     Minimum = 0ms, Maximum = 0ms, Average = 0ms                        *
*                                                                                                    *
/********************************************************/

易语言-Ping网络IP地址易语言 程序结合易语言应用接口支持库,调用API函数实现Ping网络IP地址。 立即下载

相关推荐

易语言Ping网络IP地址源码-易语言

易语言Ping网络IP地址源码

易语言服务器ping,Ping网络IP地址易语言源码

程序结合易语言应用接口支持库,调用API函数实现Ping网络IP地址。@易语言源码大全.版本2.支持库eAPI.子程序_按钮1_被单击.如果(寻找文本(编辑框2.内容,“-t”,,假)=-1)编辑框1.加入文本(#换行符+“正在Ping”+编辑框2.内容+“[”+取IP地址(编辑框2.内容)+“]”+“具有32字节的数据:”+#换行符...

weixin_36338946的博客 4505

易语言-多线程小例子之多线程Ping延迟测速

处理(易语言)从一大堆IP地址里筛选出一个延迟最低的 没写导入,默认读取运行目录下的这个文件

VC]微软ping程序源代码完整版

内容简介: 编写自己的一个ping程序,可以说是许多人迈出网络编程的第一步吧!!这个ping程序的源代码经过我的修改和调试,基本上可以取代windows中自带的ping程序. 各个模块后都有我的详细注释和修改日志,希望能够对大家的学习有所帮助!!/* 本程序的主要源代码来自MSDN网站, 笔者只是做了一些改进和注释! 另外需要注意的是在Build之前,必须加入ws2_32.lib库文件,否则会提示

patrice的专栏 3620

网络和IP地址计算器 And 多线程pingIP段 [更新]-易语言

添加了简ping模式, 简洁模式:选中表格后开始按钮下面表格的第6行实际IP有显示

易语言多线程ping

易语言多线程ping源码系统结构:设定变量,初始化表格,加入表项,加入一个IP,开始检测,检测线程, ======窗口程序集1 || ||------__启动窗口_创建完毕 || ||------设定变量 || ||------初始化表格 ||

[VC]微软ping程序源代码完整版

[VC]微软ping程序源代码完整版内容简介: 编写自己的一个ping程序,可以说是许多人迈出网络编程的第一步吧!!这个ping程序的源代码经过我的修改和调试,基本上可以取代windows中自带的ping程序. 各个模块后都有我的详细注释和修改日志,希望能够对大家的学习有所帮助!!/* 本程序的主要源代码来自MSDN网站, 笔者只是做了一些改进和注释! 另外需要注意的是在Build之前,必须加

miaoshengwu Blog 1943

易语言Ping网络IP地址

易语言Ping网络IP地址源码系统结构:网络_PING网络延迟时间,Ping返回状态,GetEnvironmentVar,IcmpSendEcho,IcmpCreateFile,IcmpCloseHandle,Len_ICMP,网络通讯到网络地址_,设置时钟_,销毁时钟_,取环境变量值_

java编写ping程序源代码_微软ping程序源代码完整版

作者:侯志江编写自己的一个ping程序,可以说是许多人迈出网络编程的第一步吧!!这个ping程序的源代码经过我的修改和调试,基本上可以取代windows中自带的ping程序. 各个模块后都有我的详细注释和修改日志,希望能够对大家的学习有所帮助!!/* 本程序的主要源代码来自MSDN网站, 笔者只是做了一些改进和注释! 另外需要注意的是在Build之前,必须加入ws2_32.lib库文件,否则会提...

weixin_31486383的博客 302

易语言服务器端口检测工具

易语言服务器端口检测工具源码系统结构:读取服务器列表_,子程序_刷新,保存环境设置_,载入配置文件_,居中窗口_,刷新异常信息_, ======窗口程序集_启动窗口 || ||------__启动窗口_创建完毕

在Ultralytics YOLO中添加/更换模块详细指南

使用参数继承 my_module_args: &my_args [64, 3, 0.5] # 定义参数模板 backbone: - [-1, 1, MyModule, *my_args] # 引用参数。

MR_Colorful的博客 2583
上一篇: c++试题
下一篇: 搜 索 算 法
manplus
博客等级 码龄22年 6粉丝 160原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值