m0_54220094的博客

基本互联的IS-IS路由配置

OSPFV3简单配置实验，供初学者学习与参考。

本文针对特定IP进行专家级ACL管理

本次实验主要是在OSPF的网络类型通信情况下，调整接口的网络类型为point to point 模式，以此达到加快邻居关系收敛的目的。

拓扑图：步骤一：配置IP地址PCA IP:172.20.106.2 MASK:255.255.255.0 GAT :172.20.106.1SERVER0: IP: 10.10.10.2 MASK:255.255.255.0 GAT:10.10.10.1RA:Router#Router#confConfiguring from terminal, memory, or network [terminal]?Enter configuration commands, on.

拓扑图：步骤一：配置IP地址PCA IP:172.20.106.2 MASK:255.255.255.0 GAT :172.20.106.1SERVER0: IP: 10.10.10.2 MASK:255.255.255.0 GAT:10.10.10.1RA:Router#Router#confConfiguring from terminal, memory, or network [terminal]?Enter configuration commands, one

拓扑图：步骤一：配置ip地址PCA: IP:172.20.106.2 MASK: 255.255.255.0 GAT:172.20.106.1PCB: IP：192.168.10.2 MASK:255.255.255.0 GAT:192.168.10.1RA：RA#RA#confConfiguring from terminal, memory, or network [terminal]?Enter configuration commands, one per .

Switch>enableSwitch#confConfiguring from terminal, memory, or network [terminal]?Enter configuration commands, one per line. End with CNTL/Z.Switch(config)#vlan 10Switch(config-vlan)#vlan 20Switch(config-vlan)#int vlan 10Switch(config...

拓扑图R1Router#Router#confConfiguring from terminal, memory, or network [terminal]?Enter configuration commands, one per line. End with CNTL/Z.Router(config)#hostname R1R1(config)#int s2/0R1(config-if)#ip add 172.20.106.1 255.255.255.0R.

拓扑图Switch配置：Switch>enableSwitch#config terminalEnter configuration commands, one per line. End with CNTL/Z.Switch(config)#vlan 10Switch(config-vlan)#vlan 20Switch(config-vlan)#int vlan 10Switch(config-if)#%LINK-5-CHANGED: Interface V

拓扑图：Router配置Router>enableRouter#confConfiguring from terminal, memory, or network [terminal]?Enter configuration commands, one per line. End with CNTL/Z.Router(config)#int f0/0Router(config-if)#no shRouter(config-if)#%LINK-5-CHANGED: