fbtest

本文详细介绍了如何使用Linux framebuffer设备在屏幕上绘制矩形,包括打开设备、获取屏幕信息、映射内存、设置颜色并绘制图形的过程。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

http://blog.sina.com.cn/s/blog_4a0a39c30100ax1v.html

fbtest.c:

//http://blog.sina.com.cn/s/blog_4a0a39c30100ax1v.html


#include <unistd.h>
#include <stdio.h>
#include <fcntl.h>
#include <linux/fb.h>
#include <sys/mman.h>
inline static unsigned short int make16color(unsigned char r, unsigned char g, unsigned char b)
{
    return (
 (((r >> 3) & 31) << 11) |
 (((g >> 2) & 63) << 5)  |
  ((b >> 3) & 31)        );
}
int main() {
    int fbfd = 0;
    struct fb_var_screeninfo vinfo;
    struct fb_fix_screeninfo finfo;
    long int screensize = 0;
 char *fbp = 0;
    int x = 0, y = 0;
    int guage_height = 20, step = 10;
    long int location = 0;
    // Open the file for reading and writing
    fbfd = open("/dev/graphics/fb0", O_RDWR);
    if (!fbfd) {
        printf("Error: cannot open framebuffer device.\n");
        exit(1);
    }
    printf("The framebuffer device was opened successfully.\n");
    // Get fixed screen information
    if (ioctl(fbfd, FBIOGET_FSCREENINFO, &finfo)) {
        printf("Error reading fixed information.\n");
        exit(2);
    }
    // Get variable screen information
    if (ioctl(fbfd, FBIOGET_VSCREENINFO, &vinfo)) {
        printf("Error reading variable information.\n");
        exit(3);
    }
 printf("sizeof(unsigned short) = %d\n", sizeof(unsigned short));
    printf("%dx%d, %dbpp\n", vinfo.xres, vinfo.yres, vinfo.bits_per_pixel );
 printf("xoffset:%d, yoffset:%d, line_length: %d\n", vinfo.xoffset, vinfo.yoffset, finfo.line_length );
    // Figure out the size of the screen in bytes
    screensize = vinfo.xres * vinfo.yres * vinfo.bits_per_pixel / 8;;
    // Map the device to memory
    fbp = (char *)mmap(0, screensize, PROT_READ | PROT_WRITE, MAP_SHARED,
                       fbfd, 0);
    if ((int)fbp == -1) {
        printf("Error: failed to map framebuffer device to memory.\n");
        exit(4);
    }
    printf("The framebuffer device was mapped to memory successfully.\n");
 //set to black color first
 memset(fbp, 0, screensize);
    //draw rectangle
    y = (vinfo.yres - guage_height) / 2 - 2;       // Where we are going to put the pixel
    for (x = step - 2; x < vinfo.xres - step + 2; x++) {
        location = (x+vinfo.xoffset) * (vinfo.bits_per_pixel/8) +
                       (y+vinfo.yoffset) * finfo.line_length;
        *((unsigned short int*)(fbp + location)) = 255;
    }
    y = (vinfo.yres + guage_height) / 2 + 2;       // Where we are going to put the pixel
    for (x = step - 2; x < vinfo.xres - step + 2; x++) {
        location = (x+vinfo.xoffset) * (vinfo.bits_per_pixel/8) +
                       (y+vinfo.yoffset) * finfo.line_length;
        *((unsigned short int*)(fbp + location)) = 255;
    }
    x = step - 2;
    for (y = (vinfo.yres - guage_height) / 2 - 2; y < (vinfo.yres + guage_height) / 2 + 2; y++) {
        location = (x+vinfo.xoffset) * (vinfo.bits_per_pixel/8) +
                       (y+vinfo.yoffset) * finfo.line_length;
        *((unsigned short int*)(fbp + location)) = 255;
    }
    x = vinfo.xres - step + 2;
    for (y = (vinfo.yres - guage_height) / 2 - 2; y < (vinfo.yres + guage_height) / 2 + 2; y++) {
        location = (x+vinfo.xoffset) * (vinfo.bits_per_pixel/8) +
                       (y+vinfo.yoffset) * finfo.line_length;
        *((unsigned short int*)(fbp + location)) = 255;
    }
    // Figure out where in memory to put the pixel
    for ( x = step; x < vinfo.xres - step; x++ ) {
        for ( y = (vinfo.yres - guage_height) / 2; y < (vinfo.yres + guage_height) / 2; y++ ) {
            location = (x+vinfo.xoffset) * (vinfo.bits_per_pixel/8) +
                       (y+vinfo.yoffset) * finfo.line_length;
            if ( vinfo.bits_per_pixel == 32 ) {
                *(fbp + location) = 100;        // Some blue
                *(fbp + location + 1) = 15+(x-100)/2;     // A little green
                *(fbp + location + 2) = 200-(y-100)/5;    // A lot of red
                *(fbp + location + 3) = 0;      // No transparency
            } else { //assume 16bpp
                unsigned char b = 255 * x / (vinfo.xres - step);
                unsigned char g = 255;     // (x - 100)/6 A little green
                unsigned char r = 255;    // A lot of red
                unsigned short int t = make16color(r, g, b);
                *((unsigned short int*)(fbp + location)) = t;
            }
        }
  //printf("x = %d, temp = %d\n", x, temp);
        //sleep to see it
        usleep(200);
    }
    //clean framebuffer
    munmap(fbp, screensize);
    close(fbfd);
    return 0;
}


****************************************************

Android.mk:

      LOCAL_PATH := $(call my-dir)
      include $(CLEAR_VARS)
      LOCAL_MODULE_TAGS := optional
      LOCAL_MODULE := fbtest
      LOCAL_SRC_FILES := $(call all-subdir-c-files)
      include $(BUILD_EXECUTABLE) 


**********************

mmm showcommands ../../../../external/fbtest/

./adb push /media/linux/1/touch/export/phablet-ubuntu-20130618/out/target/product/generic/system/bin/fbtest /data/ubuntu

./adb -e shell

cd /data/ubuntu

./fbtest


评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值