POJ1003:Hangover

Description

How far can you make a stack of cards overhang a table? If you have one card, you can create a maximum overhang of half a card length. (We're assuming that the cards must be perpendicular to the table.) With two cards you can make the top card overhang the bottom one by half a card length, and the bottom one overhang the table by a third of a card length, for a total maximum overhang of 1/2+ 1/3= 5/6 card lengths. In general you can maken cards overhang by 1/2+ 1/3+ 1/4 + ... + 1/(n+ 1) card lengths, where the top card overhangs the second by 1/2, the second overhangs tha third by 1/3, the third overhangs the fourth by 1/4, etc., and the bottom card overhangs the table by 1/(n+ 1). This is illustrated in the figure below.

Input

The input consists of one or more test cases, followed by a line containing the number 0.00 that signals the end of the input. Each test case is a single line containing a positive floating-point number c whose value is at least 0.01 and at most 5.20; c will contain exactly three digits.

Output

For each test case, output the minimum number of cards necessary to achieve an overhang of at least c card lengths. Use the exact output format shown in the examples.

Sample Input

1.00
3.71
0.04
5.19
0.00

Sample Output

3 card(s)
61 card(s)
1 card(s)
273 card(s)

#include <stdio.h>

int main()
{
    int n;
    float a,b;
    while(~scanf("%f",&b),b)
    {
        a = 0.0;
        for(n = 1;a<b;++n)
        a+=1.0/(float)(n+1);
        printf("%d card(s)\n",n-1);
    }

    return 0;
}