solaris11 创建DLMP聚合

最新推荐文章于 2025-04-14 13:17:38 发布

lisp007

最新推荐文章于 2025-04-14 13:17:38 发布

阅读量666

点赞数

CC 4.0 BY-SA版权

分类专栏： solaris11

本文链接：https://blog.youkuaiyun.com/li1121567428/article/details/83749324

solaris11 专栏收录该内容

6 篇文章

订阅专栏

本文详细介绍了在SunOS系统中创建链路聚合的过程，包括使用dladm和ipadm命令创建链路聚合、将链路添加到聚合、为聚合分配IP地址以及从聚合中删除链路的方法。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

创建链路聚合

1、创建链路聚合

root@solts01:~# dladm show-phys
LINK MEDIA STATE SPEED DUPLEX DEVICE
net1 Ethernet unknown 0 unknown e1000g1
net2 Ethernet unknown 0 unknown e1000g2
net3 Ethernet unknown 0 unknown e1000g3
net0 Ethernet up 1000 full e1000g0

root@solts01:~# ipadm show-if
IFNAME CLASS STATE ACTIVE OVER
lo0 loopback ok yes –
net0 ip ok yes –

root@solts01:~# dladm show-link
LINK CLASS MTU STATE OVER
net1 phys 1500 unknown –
net2 phys 1500 unknown –
net3 phys 1500 unknown –
net0 phys 1500 up –

root@solts01:~# dladm create-aggr -m dlmp -l net1 -l net2 -l net3 dlmp0
root@solts01:~# dladm show-aggr -x
LINK PORT SPEED DUPLEX STATE ADDRESS PORTSTATE
dlmp0 – 1000Mb full up 0:c:29:4f:53:74 –
net3 1000Mb full up 0:c:29:4f:53:88 attached
net1 1000Mb full up 0:c:29:4f:53:74 attached
net2 1000Mb full up 0:c:29:4f:53:7e attached

root@solts01:~# ipadm create-ip dlmp0
root@solts01:~# ipadm create-addr -T static -a local=192.168.2.136/24 dlmp0/v4

root@solts01:~# dladm show-aggr -x
LINK PORT SPEED DUPLEX STATE ADDRESS PORTSTATE
dlmp0 – 1000Mb full up 0:c:29:4f:53:74 –
net3 1000Mb full up 0:c:29:4f:53:88 attached
net1 1000Mb full up 0:c:29:4f:53:74 attached
net2 1000Mb full up 0:c:29:4f:53:7e attached

root@solts01:~# ipadm show-addr
ADDROBJ TYPE STATE ADDR
lo0/v4 static ok 127.0.0.1/8
net0/v4 static ok 192.168.2.135/24
dlmp0/v4 static ok 192.168.2.136/24
lo0/v6 static ok ::1/128
net0/v6 addrconf ok fe80::20c:29ff:fe4f:536a/10

root@solts01:~# ipadm create-addr -T dhcp dlmp0
dlmp0/v4a

root@solts01:~# ipadm show-addr
ADDROBJ TYPE STATE ADDR
lo0/v4 static ok 127.0.0.1/8
dlmp0/v4 static ok 192.168.2.136/24
dlmp0/v4a dhcp ok 192.168.2.183/24
net0/v4 static ok 192.168.2.135/24
lo0/v6 static ok ::1/128
net0/v6 addrconf ok fe80::20c:29ff:fe4f:536a/10

2、将链路添加到聚合

root@solts01:~# ipadm show-if
IFNAME CLASS STATE ACTIVE OVER
lo0 loopback ok yes –
dlmp0 ip ok yes –
net0 ip ok yes –

root@solts01:~# dladm show-link
LINK CLASS MTU STATE OVER
net1 phys 1500 up –
net2 phys 1500 up –
net3 phys 1500 unknown –
net0 phys 1500 up –
dlmp0 aggr 1500 up net1 net2

root@solts01:~# ipadm delete-ip net3
root@solts01:~# dladm add-aggr -l net3 dlmp0

root@solts01:~# dladm show-link
LINK CLASS MTU STATE OVER
net1 phys 1500 up –
net2 phys 1500 up –
net3 phys 1500 up –
net0 phys 1500 up –
dlmp0 aggr 1500 up net1 net2 net3

3、从聚合中删除链路

root@solts01:~# dladm show-link
LINK CLASS MTU STATE OVER
net1 phys 1500 up –
net2 phys 1500 up –
net3 phys 1500 up –
net0 phys 1500 up –
dlmp0 aggr 1500 up net3 net1 net2

root@solts01:~# dladm remove-aggr -l net3 dlmp0

root@solts01:~# dladm show-link
LINK CLASS MTU STATE OVER
net1 phys 1500 up –
net2 phys 1500 up –
net3 phys 1500 unknown –
net0 phys 1500 up –
dlmp0 aggr 1500 up net1 net2