目录
oom killer&reaper
kernel-4.19/mm/page_alloc.c
void show_free_areas()
5558 static void show_migration_types(unsigned char type)
5559 {
5560 static const char types[MIGRATE_TYPES] = {
5561 [MIGRATE_UNMOVABLE] = 'U',
5562 [MIGRATE_MOVABLE] = 'M',
5563 [MIGRATE_RECLAIMABLE] = 'E',
5564 [MIGRATE_HIGHATOMIC] = 'H',
5565 #ifdef CONFIG_CMA
5566 [MIGRATE_CMA] = 'C',
5567 #endif
5568 #ifdef CONFIG_MEMORY_ISOLATION
5569 [MIGRATE_ISOLATE] = 'I',
5570 #endif
5571 };
5572 char tmp[MIGRATE_TYPES + 1];
5573 char *p = tmp;
5574 int i;
5575
5576 for (i = 0; i < MIGRATE_TYPES; i++) {
5577 if (type & (1 << i))
5578 *p++ = types[i];
5579 }
5580
5581 *p = '\0';
5582 printk(KERN_CONT "(%s) ", tmp);
5583 }
5584
07-26 07:17:13.012294 665 665 I tombstoned: received crash request for pid 1666
07-26 07:17:13.069550 1666 1678 I system_server: Wrote stack traces to tombstoned
07-26 07:17:13.069883 665 665 E tombstoned: Traces for pid 1666 written to: trace_14
free 内存：[52244.829414] Normal free:176476kB min:8084kB low:41816kB high:57100kB
低于low 水位
<4>[51754.901217] Normal free:37948kB min:8084kB low:41816kB high:57100kB active_anon:1186056kB inactive_anon:902712kB active_file:478228kB inactive_file:771480kB unevictable:160100kB writepending:180kB present:5242872kB managed:5095344kB mlocked:160100kB kernel_stack:87272kB pagetables:112028kB bounce:0kB free_pcp:7580kB local_pcp:1000kB free_cma:0kB
<4>[52244.829414] Normal free:176476kB min:8084kB low:41816kB high:57100kB active_anon:1017432kB inactive_anon:933272kB active_file:351592kB inactive_file:674244kB unevictable:160108kB writepending:4572kB present:5242872kB managed:5095344kB mlocked:160108kB kernel_stack:88052kB pagetables:115716kB bounce:0kB free_pcp:4680kB local_pcp:184kB free_cma:4944kB
<4>[52617.818993] Normal free:13104kB min:8084kB low:41816kB high:57100kB active_anon:1249956kB inactive_anon:815476kB active_file:347316kB inactive_file:683292kB unevictable:160108kB writepending:1596kB present:5242872kB managed:5095344kB mlocked:160108kB kernel_stack:91604kB pagetables:123852kB bounce:0kB free_pcp:9056kB local_pcp:1092kB free_cma:696kB
<4>[52716.114577] Normal free:254152kB min:8084kB low:41816kB high:57100kB active_anon:851372kB inactive_anon:776516kB active_file:327688kB inactive_file:558232kB unevictable:160108kB writepending:780kB present:5242872kB managed:5095344kB mlocked:160108kB kernel_stack:78948kB pagetables:146820kB bounce:0kB free_pcp:5552kB local_pcp:536kB free_cma:23092kB
<4>[52813.015225] Normal free:42824kB min:8084kB low:41816kB high:57100kB active_anon:1100268kB inactive_anon:670188kB active_file:592840kB inactive_file:912928kB unevictable:160124kB writepending:848kB present:5242872kB managed:5095344kB mlocked:160124kB kernel_stack:80996kB pagetables:106528kB bounce:0kB free_pcp:6908kB local_pcp:428kB free_cma:496kB
内存信息：
<3>[52892.632369] (6)[10640:updateBufferCou][ION]warn: alloc pages order: 1 time: 35948307 ns
<4>[52892.632380] (6)[10640:updateBufferCou]active_anon:388097 inactive_anon:192252 isolated_anon:0
<4>[52892.632380] active_file:161630 inactive_file:412807 isolated_file:0
<4>[52892.632380] unevictable:40309 dirty:8659 writeback:114 unstable:0
<4>[52892.632380] slab_reclaimable:66918 slab_unreclaimable:84971
<4>[52892.632380] mapped:303466 shmem:24030 pagetables:35513 bounce:0
<4>[52892.632380] free:104913 free_pcp:3369 free_cma:489
<4>[52892.632387] (6)[10640:updateBufferCou]Node 0 active_anon:1552388kB inactive_anon:769008kB active_file:646520kB inactive_file:1651228kB unevictable:161236kB isolated(anon):0kB isolated(file):0kB mapped:1213864kB dirty:34636kB writeback:456kB shmem:96120kB writeback_tmp:0kB unstable:0kB all_unreclaimable? no
<4>[52892.632392] DMA32 free:347432kB min:4284kB low:22160kB high:30260kB active_anon:448000kB inactive_anon:176596kB active_file:175432kB inactive_file:576756kB unevictable:1112kB writepending:416kB present:2770188kB managed:2719800kB mlocked:1112kB kernel_stack:31020kB pagetables:43660kB bounce:0kB free_pcp:10512kB local_pcp:1332kB free_cma:1264kB
<4>[52892.632395] (6)[10640:updateBufferCou]lowmem_reserve[]: 0 4975 4975
<4>[52892.632400] Normal free:72220kB min:8084kB low:41816kB high:57100kB active_anon:1104904kB inactive_anon:592640kB active_file:471088kB inactive_file:1074472kB unevictable:160124kB writepending:34480kB present:5242872kB managed:5095344kB mlocked:160124kB kernel_stack:75024kB pagetables:98392kB bounce:0kB free_pcp:2936kB local_pcp:624kB free_cma:692kB
<4>[52892.632401] (6)[10640:updateBufferCou]lowmem_reserve[]: 0 0 0
<4>[52892.632404] DMA32: 2449*4kB (UMECH) 2355*8kB (UMECH) 207*16kB (UECH) 1*32kB (UECH) 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB 11884*4kB (UMECH) 4727*8kB (UMECH) 546*16kB (UECH) 7*32kB (UECH) 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB 16521*4kB (UMECH) 4075*8kB (UMECH) 258*16kB (UECH) 6*32kB (UECH) 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB 10031*4kB (UMECH) 2727*8kB (UMECH) 1490*16kB (UECH) 1014*32kB (UECH) 0*64kB 1*128kB (H) 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 347652kB
<4>[52892.632423] Normal: 2*4kB (UMEH) 0*8kB 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB 368*4kB (UMEH) 0*8kB 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB 1887*4kB (UMEH) 2489*8kB (MEH) 2*16kB (MEH) 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB 3384*4kB (UMEH) 2502*8kB (MEH) 321*16kB (MEH) 132*32kB (MEH) 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 71884kB
<4>[52892.632438] (6)[10640:updateBufferCou]643408 total pagecache pages
<4>[52892.632442] (6)[10640:updateBufferCou]5042 pages in swap cache
<4>[52892.632444] (6)[10640:updateBufferCou]Swap cache stats: add 5650558, delete 5645530, find 2491845/4236319
<4>[52892.632446] (6)[10640:updateBufferCou]Free swap = 2850816kB
<4>[52892.632448] (6)[10640:updateBufferCou]Total swap = 4194300kB
<3>[52892.639497] (5)[10648:camerahalserver][ION] ion_mm_heap_allocate warn: size: 6291456 time: 29212000 ns --12
kernel-4.19/drivers/staging/android/mtk_ion/mtk/ion_mm_heap.c
static int ion_mm_heap_allocate
ION &free_cma
<4>[51754.901177] free:23018 free_pcp:2800 free_cma:0
<4>[51754.901201] DMA32 free:54124kB min:4284kB low:22160kB high:30260kB active_anon:764840kB inactive_anon:337536kB active_file:210404kB inactive_file:450608kB unevictable:1088kB writepending:388kB present:2770188kB managed:2719800kB mlocked:1088kB kernel_stack:42520kB pagetables:63680kB bounce:0kB free_pcp:3616kB local_pcp:480kB free_cma:0kB
<4>[51754.901217] Normal free:37948kB min:8084kB low:41816kB high:57100kB active_anon:1186056kB inactive_anon:902712kB active_file:478228kB inactive_file:771480kB unevictable:160100kB writepending:180kB present:5242872kB managed:5095344kB mlocked:160100kB kernel_stack:87272kB pagetables:112028kB bounce:0kB free_pcp:7580kB local_pcp:1000kB free_cma:0kB
<4>[52244.829368] free:117621 free_pcp:3984 free_cma:1423
<4>[52244.829398] DMA32 free:294008kB min:4284kB low:22160kB high:30260kB active_anon:462680kB inactive_anon:400480kB active_file:150328kB inactive_file:500308kB unevictable:1096kB writepending:528kB present:2770188kB managed:2719800kB mlocked:1096kB kernel_stack:41244kB pagetables:57396kB bounce:0kB free_pcp:11256kB local_pcp:1424kB free_cma:748kB
<4>[52244.829414] Normal free:176476kB min:8084kB low:41816kB high:57100kB active_anon:1017432kB inactive_anon:933272kB active_file:351592kB inactive_file:674244kB unevictable:160108kB writepending:4572kB present:5242872kB managed:5095344kB mlocked:160108kB kernel_stack:88052kB pagetables:115716kB bounce:0kB free_pcp:4680kB local_pcp:184kB free_cma:4944kB
<4>[52617.818954] free:14475 free_pcp:4365 free_cma:174
<3>[52104.023224] (6)[865:HwBinder:820_1][ION] ion_mm_heap_allocate warn: size: 4833280 time: 11988847 ns --10
<3>[52149.067876] (1)[820:allocator@4.0-s][ION] ion_mm_heap_allocate warn: size: 4644864 time: 15130462 ns --10
<3>[52177.676606] (4)[865:HwBinder:820_1][ION] ion_mm_heap_allocate warn: size: 4833280 time: 12451308 ns --10
<3>[52244.648844] (1)[865:HwBinder:820_1][ION] ion_mm_heap_allocate warn: size: 4587520 time: 11143693 ns --10
<3>[52244.853367] (2)[865:HwBinder:820_1][ION] ion_mm_heap_allocate warn: size: 4640768 time: 48444693 ns --10
<3>[52281.490891] (2)[1150:HwBinder:820_3][ION] ion_mm_heap_allocate warn: size: 4644864 time: 20040308 ns --10
<3>[52285.704463] (5)[1150:HwBinder:820_3][ION] ion_mm_heap_allocate warn: size: 4833280 time: 14012308 ns --10
<3>[52342.068943] (0)[1150:HwBinder:820_3][ION] ion_mm_heap_allocate warn: size: 4657152 time: 10820385 ns --10
oom-killer 触发 oom_reaper 回收内存
<6>[52422.931280] (6)[85:oom_reaper][wlan][17241]nicGetPendingCmdInfo:(TX INFO) Get command: 000000003d899667, nicCmdEventQueryStatistics.cfi_jt [wlan_drv_gen4m], cmd=0x82, seq=125
<6>[52422.936286] (6)[85:oom_reaper]oom_reaper: reaped process 32659 (ocess.gservices), now anon-rss:0kB, file-rss:0kB, shmem-rss:476kB
<7>[52422.942561] (6)[5106:mali-cmar-backe]mtk_dbgtop_dfd_timeout: before MTK_DBGTOP_LATCH_CTL2(0x603e8)
<7>[52422.970486] (1)[5106:mali-cmar-backe]mtk_dbgtop_dfd_timeout: before MTK_DBGTOP_LATCH_CTL2(0x603e8)
<6>[52422.972047] (6)[85:oom_reaper]oom_reaper: reaped process 19935 (.android.gms.ui), now anon-rss:0kB, file-rss:8716kB, shmem-rss:804kB
<6>[52422.980762] (6)[85:oom_reaper]oom_reaper: reaped process 16233 (id.printspooler), now anon-rss:0kB, file-rss:0kB, shmem-rss:456kB
<7>[52422.996885] (7)[5106:mali-cmar-backe]mtk_dbgtop_dfd_timeout: before MTK_DBGTOP_LATCH_CTL2(0x603e8)
<6>[52422.999074] (6)[85:oom_reaper]oom_reaper: reaped process 7292 (ndroid.calendar), now anon-rss:0kB, file-rss:7712kB, shmem-rss:2336kB
<6>[52423.019935] (2)[128:watchdogd][wdtk] kick watchdog
<6>[52423.023571] (6)[85:oom_reaper]oom_reaper: reaped process 31759 (id.apps.tachyon), now anon-rss:0kB, file-rss:416kB, shmem-rss:748kB
<6>[52423.029840] (6)[85:oom_reaper]oom_reaper: reaped process 7126 (eng:pushservice), now anon-rss:0kB, file-rss:0kB, shmem-rss:468kB
<7>[52423.030867] (7)[5106:mali-cmar-backe]mtk_dbgtop_dfd_timeout: before MTK_DBGTOP_LATCH_CTL2(0x603e8)
<6>[52423.045601] (6)[85:oom_reaper]oom_reaper: reaped process 30465 (wps.moffice_eng), now anon-rss:0kB, file-rss:2880kB, shmem-rss:904kB
<6>[52423.051797] (6)[85:oom_reaper]oom_reaper: reaped process 6593 (ocessService0:0), now anon-rss:0kB, file-rss:0kB, shmem-rss:528kB
<6>[52423.058919] (6)[85:oom_reaper]oom_reaper: reaped process 30827 (ice_eng:gcmpush), now anon-rss:0kB, file-rss:0kB, shmem-rss:648kB
<6>[52423.064856] (6)[85:oom_reaper]oom_reaper: reaped process 7146 (erseabackground), now anon-rss:0kB, file-rss:0kB, shmem-rss:476kB
<7>[52423.066918] (7)[5106:mali-cmar-backe]mtk_dbgtop_dfd_timeout: before MTK_DBGTOP_LATCH_CTL2(0x603e8)
<6>[52423.070778] (6)[85:oom_reaper]oom_reaper: reaped process 6658 (:widgetProvider), now anon-rss:0kB, file-rss:0kB, shmem-rss:480kB
<6>[52423.079906] (6)[85:oom_reaper]oom_reaper: reaped process 6689 (office_eng:scan), now anon-rss:0kB, file-rss:0kB, shmem-rss:468kB
<3>[52423.085944] (6)[26470:kworker/6:2][sensor_devinfo] sync_utc2scp_work 583 : kernel_ts: 1658790184.875517, 1658790184.875517
<3>[52423.086691] -(1)[27755:binder:20473_8][mtk_nanohub]IPI_SENSOR cannot find cmd!
<7>[52423.097788] (1)[5106:mali-cmar-backe]mtk_dbgtop_dfd_timeout: before MTK_DBGTOP_LATCH_CTL2(0x603e8)
Low on memory
07-26 07:18:57.380075 16722 17348 I ActivityManager: Low on memory:
07-26 07:18:57.380399 16722 17348 I ActivityManager: MemInfo: 677,896K slab, 9,172K shmem, 132,720K vm alloc, 39,216K page tables 37,468K kernel stack
07-26 07:18:57.380399 16722 17348 I ActivityManager: 5,924K buffers, 4,145,992K cached, 680,532K mapped, 1,117,072K free
07-26 07:18:57.380399 16722 17348 I ActivityManager: ZRAM: 223,464K RAM, 4,194,300K swap total, 3,831,784K swap free
07-26 07:18:57.380399 16722 17348 I ActivityManager: Free RAM: 5,513,732K
07-26 07:18:57.380399 16722 17348 I ActivityManager: ION: 512,372K
07-26 07:18:57.380399 16722 17348 I ActivityManager: GPU: 0K
07-26 07:18:57.380399 16722 17348 I ActivityManager: Used RAM: 2,068,918K
07-26 07:18:57.380399 16722 17348 I ActivityManager: Lost RAM: 381,511K
1314 @GuardedBy("mService")
1315 final void doLowMemReportIfNeededLocked(ProcessRecord dyingProc) {
1316 // If there are no longer any background processes running,
1317 // and the app that died was not running instrumentation,
1318 // then tell everyone we are now low on memory.
1319 if (!mService.mProcessList.haveBackgroundProcessLOSP()) {
1320 boolean doReport = Build.IS_DEBUGGABLE;
1321 final long now = SystemClock.uptimeMillis();
1322 if (doReport) {
1323 if (now < (mLastMemUsageReportTime + 5 * 60 * 1000)) {
1324 doReport = false;
1325 } else {
1326 mLastMemUsageReportTime = now;
1327 }
1328 }
<4>[53359.909526] -(4)[3012:binder:1666_B]Some other process 3012:binder:1666_B want to send sig:9 to pid:16507 tgid:792 comm:FinalizerWatchd
<4>[53359.909996] (4)[792:main]critical svc 792:main exit with 9 !
native 进程内存泄漏
从 event log 中可以看到进程的内存使用信息。
一般通过 am_pss 中能看个各个进程内存使用情况，某个 native 进程的 am_pss 中 uss 过高，大概率是它引起内存泄漏。
am_pss: Pid, UID, ProcessName, Pss, Uss。
am_meminfo: Cached,Free,Zram,Kernel,Native
am_low_memory: NumProcesses
vss (virtual set size) 虚拟内存，从进程地址空间统计，包括未实际申请到物理内存的部分。
rss (resident set size) 实际物理内存+共享库。共享库如果映射多个进程，不均摊。
pss ( proportional set size) 物理内存+均摊的共享内存。
uss (unique set size) 独占物理内存，不包含共享库部分。
虚拟地址内存泄漏
vss oom，多发生在 32 位应用。虚拟地址空间不足，无法申请到 vma，所以申请内存失败。
一般只有发生泄漏的应用会崩溃，物理内存情况可能使用并不多，虚拟内存可能接近 4G(32位)。
一般需要 smaps/maps 信息做进一步分析，确认哪种类型的 vma 占比较多，那么大概率是它泄漏（比如 libc, egl，ion，等等）。
ion 内存泄漏
ion 是 android 中特有的内存分配器，一般在 camera，图像中使用较多。
通过 ion 的 ioctl 接口，可以申请不同类型的内存，可以为指定进程预留，比如 物理地址空间连续（cma），为相机预留。
ion 申请的内存需要主动释放，不释放会存在泄漏。每一个 heap 中申请的都对应一个 ion_buffer，我们可以统计 ion buffer 中某个进程占比多少（高通支持）。
如果 ion 的总量特别大（比如 4/8G），那么大概率是 ion 泄漏。再通过每个进程的信息，确定到是哪个进程申请导致的泄漏。
slab 内存泄漏
slab 机制是内核申请小块内存的管理机制，同样需要主动 free。
task 进程内存回收
在内核执行分配内存不够时，会执行out_of_memory ，会wake_oom_reaper
创建oom 内核线程
679 static int __init oom_init(void)
680 {
681 oom_reaper_th = kthread_run(oom_reaper, NULL, "oom_reaper");
682 return 0;
683 }
唤醒oom 线程执行 oom_reaper
663 static void wake_oom_reaper(struct task_struct *tsk)
664 {
665 /* mm is already queued? */
666 if (test_and_set_bit(MMF_OOM_REAP_QUEUED, &tsk->signal->oom_mm->flags))
667 return;
668
669 get_task_struct(tsk);
670
671 spin_lock(&oom_reaper_lock);
672 tsk->oom_reaper_list = oom_reaper_list; //保存之前的记录
673 oom_reaper_list = tsk; //记录要回收内存的task
674 spin_unlock(&oom_reaper_lock);
675 trace_wake_reaper(tsk->pid);
676 wake_up(&oom_reaper_wait);
677 }
对task 内存进行回收
643 static int oom_reaper(void *unused)
644 {
645 while (true) {
646 struct task_struct *tsk = NULL;
647
648 wait_event_freezable(oom_reaper_wait, oom_reaper_list != NULL);
649 spin_lock(&oom_reaper_lock);
650 if (oom_reaper_list != NULL) {
651 tsk = oom_reaper_list; //要回收内存的task
652 oom_reaper_list = tsk->oom_reaper_list; //还原之前的记录
653 }
654 spin_unlock(&oom_reaper_lock);
655
656 if (tsk)
657 oom_reap_task(tsk);
658 }
659
660 return 0;
661 }
对匿名和非VM_SHARED 页面回收
612 #define MAX_OOM_REAP_RETRIES 10
613 static void oom_reap_task(struct task_struct *tsk)
614 {
615 int attempts = 0;
616 struct mm_struct *mm = tsk->signal->oom_mm;
617
618 /* Retry the down_read_trylock(mmap_sem) a few times */
619 while (attempts++ < MAX_OOM_REAP_RETRIES && !oom_reap_task_mm(tsk, mm))
620 schedule_timeout_idle(HZ/10);
621
622 if (attempts <= MAX_OOM_REAP_RETRIES ||
623 test_bit(MMF_OOM_SKIP, &mm->flags))
624 goto done;
625
626 pr_info("oom_reaper: unable to reap pid:%d (%s)\n",
627 task_pid_nr(tsk), tsk->comm);
628 debug_show_all_locks();
629
630 done:
631 tsk->oom_reaper_list = NULL;
632
633 /*
634 * Hide this mm from OOM killer because it has been either reaped or
635 * somebody can't call up_write(mmap_sem).
636 */
637 set_bit(MMF_OOM_SKIP, &mm->flags);
638
639 /* Drop a reference taken by wake_oom_reaper */
640 put_task_struct(tsk);
641 }
杀进程内存回收
/**
1087 * out_of_memory - kill the "best" process when we run out of memory
1088 * @oc: pointer to struct oom_control
1089 *
1090 * If we run out of memory, we have the choice between either
1091 * killing a random task (bad), letting the system crash (worse)
1092 * OR try to be smart about which process to kill. Note that we
1093 * don't have to be perfect here, we just have to be good.
1094 */
1095 bool out_of_memory(struct oom_control *oc)
1096 {
1097 unsigned long freed = 0;
1098 enum oom_constraint constraint = CONSTRAINT_NONE;
1099
1100 if (oom_killer_disabled)
1101 return false;
1102
1103 if (!is_memcg_oom(oc)) {
1104 blocking_notifier_call_chain(&oom_notify_list, 0, &freed);
1105 if (freed > 0)
1106 /* Got some memory back in the last second. */
1107 return true;
1108 }
1109
1110 /*
1111 * If current has a pending SIGKILL or is exiting, then automatically
1112 * select it. The goal is to allow it to allocate so that it may
1113 * quickly exit and free its memory.
1114 */
1115 if (task_will_free_mem(current)) {
1116 mark_oom_victim(current);
1117 wake_oom_reaper(current);
1118 return true;
1119 }
1120
1121 /*
1122 * The OOM killer does not compensate for IO-less reclaim.
1123 * pagefault_out_of_memory lost its gfp context so we have to
1124 * make sure exclude 0 mask - all other users should have at least
1125 * ___GFP_DIRECT_RECLAIM to get here. But mem_cgroup_oom() has to
1126 * invoke the OOM killer even if it is a GFP_NOFS allocation.
1127 */
1128 if (oc->gfp_mask && !(oc->gfp_mask & __GFP_FS) && !is_memcg_oom(oc))
1129 return true;
1130
1131 /*
1132 * Check if there were limitations on the allocation (only relevant for
1133 * NUMA and memcg) that may require different handling.
1134 */
1135 constraint = constrained_alloc(oc);
1136 if (constraint != CONSTRAINT_MEMORY_POLICY)
1137 oc->nodemask = NULL;
1138 check_panic_on_oom(oc, constraint);
1139
1140 if (!is_memcg_oom(oc) && sysctl_oom_kill_allocating_task &&
1141 current->mm && !oom_unkillable_task(current, NULL, oc->nodemask) &&
1142 current->signal->oom_score_adj != OOM_SCORE_ADJ_MIN) {
1143 get_task_struct(current);
1144 oc->chosen = current;
1145 oom_kill_process(oc, "Out of memory (oom_kill_allocating_task)");
1146 return true;
1147 }
1148
1149 select_bad_process(oc);
1150 /* Found nothing?!?! */
1151 if (!oc->chosen) {
1152 dump_header(oc, NULL);
1153 pr_warn("Out of memory and no killable processes...\n");
1154 /*
1155 * If we got here due to an actual allocation at the
1156 * system level, we cannot survive this and will enter
1157 * an endless loop in the allocator. Bail out now.
1158 */
1159 if (!is_sysrq_oom(oc) && !is_memcg_oom(oc)) {
1160 #ifdef CONFIG_PAGE_OWNER
1161 print_max_page_owner();
1162 #endif
1163 panic("System is deadlocked on memory\n");
1164 }
1165 }
1166 if (oc->chosen && oc->chosen != (void *)-1UL)
1167 oom_kill_process(oc, !is_memcg_oom(oc) ? "Out of memory" :
1168 "Memory cgroup out of memory");
1169 return !!oc->chosen;
1170 }
-
首先通知 oom_notify_list 链表的订阅者：依据通知链（notification chains）机制，通知注册了 oom_notify_list 的模块释放内存；如果订阅者能够处理 OOM，释放了内存则会退出 OOM killer，不执行后续操作。
-
如果当前 task 存在 pending 的 SIGKILL，或者已经退出的时，会释放当前进程的资源。包括和 task 共享同一个内存描述符 mm_struct 的进程、线程也会被杀掉。
-
对于 IO-less 的回收，依据 gfp_mask 判断，如果 1) 分配的是非 FS 操作类型的分配，并且 2）不是 cgroup 的内存 OOM -> 直接退出 oom-killer。
-
检查内存分配的约束（例如 NUMA），有 CONSTRAINT_NONE, CONSTRAINT_CPUSET，CONSTRAINT_MEMORY_POLICY, CONSTRAINT_MEMCG 类型。
- 检查
/proc/sys/vm/panic_on_oom的设置，做操作；为0 就不会直接panic;为1 可能 panic，也可能尝试 oom_killer。如果 panic_on_oom 设置的为 2，则进程直接 panic 强制退出 -
/proc/sys/vm/oom_kill_allocating_task为 true 的时候，调用 oom_kill_process 直接 kill 掉当前想要分配内存的进程 (此进程能够被 kill 时)。 -
select_bad_process()，选择最合适的进程，调用 oom_kill_process。
-
如果没有合适的进程，如果非 sysrq 和 memcg，则 panic 强制退出。
通过oom_kill_process 可能会调用wake_oom_reaper 回收内存。
Android OOM、OOMKillery以及LMK相关概念_尹杰Enjoy your code的博客-优快云博客
Kubernetes 单机侧的驱逐策略总结_米开朗基杨的博客-优快云博客
lmkd killer
lmk & shrinker
这个不同的android 版本，实现有些差异
Linux内核机制总结内存管理之页回收(二十三)_张衡天的博客-优快云博客_linux内存回收命令
lowmemorykiller驱动 - ruby.dongyu - 博客园
binder.c
__init binder_init(void){
binder_alloc_shrinker_init();
init_binder_device(device_name)；
init_binderfs();
}
一个例子就只binder 会注册shrinker ，低内存会通过shrinke_slab 进行回收bindr_alloc 分配的页面。
ProcessList.java
// Low Memory Killer Daemon command codes.
346 // These must be kept in sync with lmk_cmd definitions in lmkd.h
347 //
348 // LMK_TARGET <minfree> <minkillprio> ... (up to 6 pairs)
349 // LMK_PROCPRIO <pid> <uid> <prio>
350 // LMK_PROCREMOVE <pid>
351 // LMK_PROCPURGE
352 // LMK_GETKILLCNT
353 // LMK_SUBSCRIBE
354 // LMK_PROCKILL
355 // LMK_UPDATE_PROPS
356 // LMK_KILL_OCCURRED
357 // LMK_STATE_CHANGED
358 static final byte LMK_TARGET = 0;
359 static final byte LMK_PROCPRIO = 1;
360 static final byte LMK_PROCREMOVE = 2;
361 static final byte LMK_PROCPURGE = 3;
362 static final byte LMK_GETKILLCNT = 4;
363 static final byte LMK_SUBSCRIBE = 5;
364 static final byte LMK_PROCKILL = 6; // Note: this is an unsolicited command
365 static final byte LMK_UPDATE_PROPS = 7;
366 static final byte LMK_KILL_OCCURRED = 8; // Msg to subscribed clients on kill occurred event
367 static final byte LMK_STATE_CHANGED = 9; // Msg to subscribed clients on state changed
public static void setOomAdj(int pid, int uid, int amt) {
long start = SystemClock.elapsedRealtime();
1508 ByteBuffer buf = ByteBuffer.allocate(4 * 4);
1509 buf.putInt(LMK_PROCPRIO);
1510 buf.putInt(pid);
1511 buf.putInt(uid);
1512 buf.putInt(amt);
1513 writeLmkd(buf, null);
1514 long now = SystemClock.elapsedRealtime();
1515 if ((now-start) > 250) {
1516 Slog.w("ActivityManager", "SLOW OOM ADJ: " + (now-start) + "ms for pid " + pid
1517 + " = " + amt);
1518 }
1519 }
1520
ams 根据进程状态，更新oom ，这样就会跟lmkd 通信
system/memory/lmkd/lmkd.cpp
7 /*
118 * PSI monitor tracking window size.
119 * PSI monitor generates events at most once per window,
120 * therefore we poll memory state for the duration of
121 * PSI_WINDOW_SIZE_MS after the event happens.
122 */
123 #define PSI_WINDOW_SIZE_MS 1000
124 /* Polling period after PSI signal when pressure is high */
125 #define PSI_POLL_PERIOD_SHORT_MS 10
126 /* Polling period after PSI signal when pressure is low */
127 #define PSI_POLL_PERIOD_LONG_MS 100
128
129 #define min(a, b) (((a) < (b)) ? (a) : (b))
130 #define max(a, b) (((a) > (b)) ? (a) : (b))
131
132 #define FAIL_REPORT_RLIMIT_MS 1000
133
134 /*
135 * System property defaults
136 */
137 /* ro.lmk.swap_free_low_percentage property defaults */
138 #define DEF_LOW_SWAP 10
139 /* ro.lmk.thrashing_limit property defaults */
140 #define DEF_THRASHING_LOWRAM 30
141 #define DEF_THRASHING 100
142 /* ro.lmk.thrashing_limit_decay property defaults */
143 #define DEF_THRASHING_DECAY_LOWRAM 50
144 #define DEF_THRASHING_DECAY 10
145 /* ro.lmk.psi_partial_stall_ms property defaults */
146 #define DEF_PARTIAL_STALL_LOWRAM 200
147 #define DEF_PARTIAL_STALL 70
148 /* ro.lmk.psi_complete_stall_ms property defaults */
149 #define DEF_COMPLETE_STALL 700
150
151 #define LMKD_REINIT_PROP "lmkd.reinit"
152
153 /* default to old in-kernel interface if no memory pressure events */
154 static bool use_inkernel_interface = true;
155 static bool has_inkernel_module;
156
157 /* memory pressure levels */
158 enum vmpressure_level {
159 VMPRESS_LEVEL_LOW = 0,
160 VMPRESS_LEVEL_MEDIUM,
161 VMPRESS_LEVEL_CRITICAL,
162 VMPRESS_LEVEL_SUPER_CRITICAL,
163 VMPRESS_LEVEL_COUNT
164 };
int main(int argc, char **argv) {
3949 if (!init()) {
3950 if (!use_inkernel_interface) {
3951 /*
3952 * MCL_ONFAULT pins pages as they fault instead of loading
3953 * everything immediately all at once. (Which would be bad,
3954 * because as of this writing, we have a lot of mapped pages we
3955 * never use.) Old kernels will see MCL_ONFAULT and fail with
3956 * EINVAL; we ignore this failure.
3957 *
3958 * N.B. read the man page for mlockall. MCL_CURRENT | MCL_ONFAULT
3959 * pins ⊆ MCL_CURRENT, converging to just MCL_CURRENT as we fault
3960 * in pages.
3961 */
3962 /* CAP_IPC_LOCK required */
3963 if (mlockall(MCL_CURRENT | MCL_FUTURE | MCL_ONFAULT) && (errno != EINVAL)) {
3964 ALOGW("mlockall failed %s", strerror(errno));
3965 }
3966
3967 /* CAP_NICE required */
3968 struct sched_param param = {
3969 .sched_priority = 1,
3970 };
3971 if (sched_setscheduler(0, SCHED_FIFO, ¶m)) {
3972 ALOGW("set SCHED_FIFO failed %s", strerror(errno));
3973 }
3974 }
3975
3976 mainloop();
3977 }
3978
3979 android_log_destroy(&ctx);
3980
3981 ALOGI("exiting");
3982 return 0;
3983 }
static int init(void) {
3547 static struct event_handler_info kernel_poll_hinfo = { 0, kernel_event_handler };
3552 struct reread_data file_data = {
3553 .filename = ZONEINFO_PATH,
3554 .fd = -1,
3555 };
3556 struct epoll_event epev;
3557 int pidfd;
3558 int i;
3559 int ret;
3560
3561 page_k = sysconf(_SC_PAGESIZE);
3562 if (page_k == -1)
3563 page_k = PAGE_SIZE;
3564 page_k /= 1024;
3565
3566 epollfd = epoll_create(MAX_EPOLL_EVENTS);
3567 if (epollfd == -1) {
3568 ALOGE("epoll_create failed (errno=%d)", errno);
3569 return -1;
3570 }
3571
3572 // mark data connections as not connected
3573 for (int i = 0; i < MAX_DATA_CONN; i++) {
3574 data_sock[i].sock = -1;
3575 }
3576
3577 ctrl_sock.sock = android_get_control_socket("lmkd");
3578 if (ctrl_sock.sock < 0) {
3579 ALOGE("get lmkd control socket failed");
3580 return -1;
3581 }
3582
3583 ret = listen(ctrl_sock.sock, MAX_DATA_CONN);
3584 if (ret < 0) {
3585 ALOGE("lmkd control socket listen failed (errno=%d)", errno);
3586 return -1;
3587 }
3588
3589 epev.events = EPOLLIN;
3590 ctrl_sock.handler_info.handler = ctrl_connect_handler;
3591 epev.data.ptr = (void *)&(ctrl_sock.handler_info);
3592 if (epoll_ctl(epollfd, EPOLL_CTL_ADD, ctrl_sock.sock, &epev) == -1) {
3593 ALOGE("epoll_ctl for lmkd control socket failed (errno=%d)", errno);
3594 return -1;
3595 }
3596 maxevents++;
if (!init_monitors()) {
3618 return -1;
3619 }
3620 /* let the others know it does support reporting kills */
3621 property_set("sys.lmk.reportkills", "1");
3622 }
..........
}
/* default to old in-kernel interface if no memory pressure events */
static bool use_inkernel_interface = true;
static bool has_inkernel_module;
#define INKERNEL_MINFREE_PATH "/sys/module/lowmemorykiller/parameters/minfree"
#define INKERNEL_ADJ_PATH "/sys/module/lowmemorykiller/parameters/adj"
默认使用以前的mlk 机制，也就是内核lmk 模块低内存杀应用，对应的水位和adj 对应INKERNEL_MINFREE_PATH 和 INKERNEL_ADJ_PATH ，新的lmk 机制是通过内存压力事件psi 来杀应用，这样不存在内核模块对应的adj 和 内存水位文件，这样就会has_inkernel_module 和 use_inkernel_interface 都为false ，使用用户空间lmk ，用户空间lmk内存压力事件上报方式有vmpressure和psi两种方式
psi
3359 static bool init_monitors() {
3360 /* Try to use psi monitor first if kernel has it */
3361 use_psi_monitors = property_get_bool("ro.lmk.use_psi", true) &&
3362 init_psi_monitors();
3363 /* Fall back to vmpressure */
3364 if (!use_psi_monitors &&
3365 (!init_mp_common(VMPRESS_LEVEL_LOW) ||
3366 !init_mp_common(VMPRESS_LEVEL_MEDIUM) ||
3367 !init_mp_common(VMPRESS_LEVEL_CRITICAL))) {
3368 ALOGE("Kernel does not support memory pressure events or in-kernel low memory killer");
3369 return false;
3370 }
3371 if (use_psi_monitors) {
3372 ALOGI("Using psi monitors for memory pressure detection");
3373 } else {
3374 ALOGI("Using vmpressure for memory pressure detection");
3375 }
3376 return true;
3377 }
3378
3239 static bool init_psi_monitors() {
3240 /*
3241 * When PSI is used on low-ram devices or on high-end devices without memfree levels
3242 * use new kill strategy based on zone watermarks, free swap and thrashing stats
3243 */
3244 bool use_new_strategy =
3245 property_get_bool("ro.lmk.use_new_strategy", low_ram_device || !use_minfree_levels);
3246
3247 /* In default PSI mode override stall amounts using system properties */
3248 if (use_new_strategy) {
3249 /* Do not use low pressure level */
3250 psi_thresholds[VMPRESS_LEVEL_LOW].threshold_ms = 0;
3251 psi_thresholds[VMPRESS_LEVEL_MEDIUM].threshold_ms = psi_partial_stall_ms;
3252 psi_thresholds[VMPRESS_LEVEL_CRITICAL].threshold_ms = psi_complete_stall_ms;
3253 }
3254
3255 if (!init_mp_psi(VMPRESS_LEVEL_LOW, use_new_strategy)) {
3256 return false;
3257 }
3258 if (!init_mp_psi(VMPRESS_LEVEL_MEDIUM, use_new_strategy)) {
3259 destroy_mp_psi(VMPRESS_LEVEL_LOW);
3260 return false;
3261 }
3262 if (!init_mp_psi(VMPRESS_LEVEL_CRITICAL, use_new_strategy)) {
3263 destroy_mp_psi(VMPRESS_LEVEL_MEDIUM);
3264 destroy_mp_psi(VMPRESS_LEVEL_LOW);
3265 return false;
3266 }
3267 return true;
3268 }
208 static struct psi_threshold psi_thresholds[VMPRESS_LEVEL_COUNT] = {
209 { PSI_SOME, 70 }, /* 70ms out of 1sec for partial stall */
210 { PSI_SOME, 100 }, /* 100ms out of 1sec for partial stall */
211 { PSI_FULL, 70 }, /* 70ms out of 1sec for complete stall */
212 };
其中partial stall指的是该时间段内有一个或多个task因为缺少资源而等待，
complete stall指的是该时间段内所有的task都因得不到资源而等待。
psi可以是针对system-wide的，也可以是per-cgroup的。
3195 static bool init_mp_psi(enum vmpressure_level level, bool use_new_strategy) {
3196 int fd;
3197
3198 /* Do not register a handler if threshold_ms is not set */
3199 if (!psi_thresholds[level].threshold_ms) {
3200 return true;
3201 }
3202
####设置psi 参数 到 /proc/pressure/memory
3203 fd = init_psi_monitor(psi_thresholds[level].stall_type,
3204 psi_thresholds[level].threshold_ms * US_PER_MS,
3205 PSI_WINDOW_SIZE_MS * US_PER_MS);
3206
3207 if (fd < 0) {
3208 return false;
3209 }
3210
######监听内核发送满足参数的事件 及 执行函数
3211 vmpressure_hinfo[level].handler = use_new_strategy ? mp_event_psi : mp_event_common;
3212 vmpressure_hinfo[level].data = level;
3213 if (register_psi_monitor(epollfd, fd, &vmpressure_hinfo[level]) < 0) {
3214 destroy_psi_monitor(fd);
3215 return false;
3216 }
3217 maxevents++;
3218 mpevfd[level] = fd;
3219
3220 return true;
3221 }
将psi 参数写入 /proc/pressure/memory ，并监听这个文件句柄对应的事件
#define PSI_MON_FILE_MEMORY "/proc/pressure/memory"
int init_psi_monitor(enum psi_stall_type stall_type,
39 int threshold_us, int window_us) {
40 int fd;
41 int res;
42 char buf[256];
43
44 fd = TEMP_FAILURE_RETRY(open(PSI_MON_FILE_MEMORY, O_WRONLY | O_CLOEXEC));
45 if (fd < 0) {
46 ALOGE("No kernel psi monitor support (errno=%d)", errno);
47 return -1;
48 }
49
50 switch (stall_type) {
51 case (PSI_SOME):
52 case (PSI_FULL):
53 res = snprintf(buf, sizeof(buf), "%s %d %d",
54 stall_type_name[stall_type], threshold_us, window_us);
55 break;
56 default:
57 ALOGE("Invalid psi stall type: %d", stall_type);
58 errno = EINVAL;
59 goto err;
60 }
61
62 if (res >= (ssize_t)sizeof(buf)) {
63 ALOGE("%s line overflow for psi stall type '%s'",
64 PSI_MON_FILE_MEMORY, stall_type_name[stall_type]);
65 errno = EINVAL;
66 goto err;
67 }
68
69 res = TEMP_FAILURE_RETRY(write(fd, buf, strlen(buf) + 1));
70 if (res < 0) {
71 ALOGE("%s write failed for psi stall type '%s'; errno=%d",
72 PSI_MON_FILE_MEMORY, stall_type_name[stall_type], errno);
73 goto err;
74 }
75
76 return fd;
77
78 err:
79 close(fd);
80 return -1;
81 }
参考
https://www.jianshu.com/p/e01063abe31cPSI - Pressure Stall Information — The Linux Kernel documentationhttps://www.jianshu.com/p/e01063abe31c
vmpressure
3359 static bool init_monitors() {
3360 /* Try to use psi monitor first if kernel has it */
3361 use_psi_monitors = property_get_bool("ro.lmk.use_psi", true) &&
3362 init_psi_monitors();
3363 /* Fall back to vmpressure */
3364 if (!use_psi_monitors &&
3365 (!init_mp_common(VMPRESS_LEVEL_LOW) ||
3366 !init_mp_common(VMPRESS_LEVEL_MEDIUM) ||
3367 !init_mp_common(VMPRESS_LEVEL_CRITICAL))) {
3368 ALOGE("Kernel does not support memory pressure events or in-kernel low memory killer");
3369 return false;
3370 }
.......
}
3270 static bool init_mp_common(enum vmpressure_level level) {
3271 int mpfd;
3272 int evfd;
3273 int evctlfd;
3274 char buf[256];
3275 struct epoll_event epev;
3276 int ret;
3277 int level_idx = (int)level;
3278 const char *levelstr = level_name[level_idx];
3279
3280 /* gid containing AID_SYSTEM required */
3281 mpfd = open(MEMCG_SYSFS_PATH "memory.pressure_level", O_RDONLY | O_CLOEXEC);
3282 if (mpfd < 0) {
3283 ALOGI("No kernel memory.pressure_level support (errno=%d)", errno);
3284 goto err_open_mpfd;
3285 }
3286
3287 evctlfd = open(MEMCG_SYSFS_PATH "cgroup.event_control", O_WRONLY | O_CLOEXEC);
3288 if (evctlfd < 0) {
3289 ALOGI("No kernel memory cgroup event control (errno=%d)", errno);
3290 goto err_open_evctlfd;
3291 }
3292
3293 evfd = eventfd(0, EFD_NONBLOCK | EFD_CLOEXEC);
3294 if (evfd < 0) {
3295 ALOGE("eventfd failed for level %s; errno=%d", levelstr, errno);
3296 goto err_eventfd;
3297 }
3298
3299 ret = snprintf(buf, sizeof(buf), "%d %d %s", evfd, mpfd, levelstr);
3300 if (ret >= (ssize_t)sizeof(buf)) {
3301 ALOGE("cgroup.event_control line overflow for level %s", levelstr);
3302 goto err;
3303 }
3304
3305 ret = TEMP_FAILURE_RETRY(write(evctlfd, buf, strlen(buf) + 1));
3306 if (ret == -1) {
3307 ALOGE("cgroup.event_control write failed for level %s; errno=%d",
3308 levelstr, errno);
3309 goto err;
3310 }
3311
3312 epev.events = EPOLLIN;
3313 /* use data to store event level */
3314 vmpressure_hinfo[level_idx].data = level_idx;
3315 vmpressure_hinfo[level_idx].handler = mp_event_common;
3316 epev.data.ptr = (void *)&vmpressure_hinfo[level_idx];
3317 ret = epoll_ctl(epollfd, EPOLL_CTL_ADD, evfd, &epev);
3318 if (ret == -1) {
3319 ALOGE("epoll_ctl for level %s failed; errno=%d", levelstr, errno);
3320 goto err;
3321 }
3322 maxevents++;
3323 mpevfd[level] = evfd;
3324 close(evctlfd);
3325 return true;
3326
}
/dev/memcg/memory.pressure_level
/dev/memcg/cgroup.event_control
向/dev/memcg/cgroup.event_control节点写入"evfd mpfd levelstr"即可注册监听，
其中evfd告诉内核事件发生后通知谁，mpfd表示监听的是什么事件(这里为memory.pressure_level)，levelstr表示监听内存压力级别，可以是low,medium,critical
监听到事件调用 mp_event_common
static void mp_event_common(int data, uint32_t events, struct polling_params *poll_params) {
2960 unsigned long long evcount;
2961 int64_t mem_usage, memsw_usage;
2962 int64_t mem_pressure;
2963 union meminfo mi;
2964 struct zoneinfo zi;
2965 struct timespec curr_tm;
2966 static unsigned long kill_skip_count = 0;
2967 enum vmpressure_level level = (enum vmpressure_level)data;
2968 long other_free = 0, other_file = 0;
2969 int min_score_adj;
2970 int minfree = 0;
2971 static struct reread_data mem_usage_file_data = {
2972 .filename = MEMCG_MEMORY_USAGE,
2973 .fd = -1,
2974 };
2975 static struct reread_data memsw_usage_file_data = {
2976 .filename = MEMCG_MEMORYSW_USAGE,
2977 .fd = -1,
####ro.lmk.use_minfree_levels 这里确定是否用之前的 lmkd 水位和对应的 adj 杀应用
if (use_minfree_levels) {
3053 int i;
3054
3055 other_free = mi.field.nr_free_pages - zi.totalreserve_pages;
3056 if (mi.field.nr_file_pages > (mi.field.shmem + mi.field.unevictable + mi.field.swap_cached)) {
3057 other_file = (mi.field.nr_file_pages - mi.field.shmem -
3058 mi.field.unevictable - mi.field.swap_cached);
3059 } else {
3060 other_file = 0;
3061 }
3062
3063 min_score_adj = OOM_SCORE_ADJ_MAX + 1;
3064 for (i = 0; i < lowmem_targets_size; i++) {
3065 minfree = lowmem_minfree[i];
3066 if (other_free < minfree && other_file < minfree) {
3067 min_score_adj = lowmem_adj[i];
3068 break;
3069 }
3070 }
3071
3072 if (min_score_adj == OOM_SCORE_ADJ_MAX + 1) {
3073 if (debug_process_killing) {
3074 ALOGI("Ignore %s memory pressure event "
3075 "(free memory=%ldkB, cache=%ldkB, limit=%ldkB)",
3076 level_name[level], other_free * page_k, other_file * page_k,
3077 (long)lowmem_minfree[lowmem_targets_size - 1] * page_k);
3078 }
3079 return;
3080 }
3081
3082 goto do_kill;
3083 }
if (level == VMPRESS_LEVEL_LOW) {
3086 record_low_pressure_levels(&mi);
3087 }
3088
3089 if (level_oomadj[level] > OOM_SCORE_ADJ_MAX) {
3090 /* Do not monitor this pressure level */
3091 return;
3092 }
3093
3094 if ((mem_usage = get_memory_usage(&mem_usage_file_data)) < 0) {
3095 goto do_kill;
3096 }
3097 if ((memsw_usage = get_memory_usage(&memsw_usage_file_data)) < 0) {
3098 goto do_kill;
3099 }
3100
3101 // Calculate percent for swappinness.
3102 mem_pressure = (mem_usage * 100) / memsw_usage;
3103
3104 if (enable_pressure_upgrade && level != VMPRESS_LEVEL_CRITICAL) {
3105 // We are swapping too much.
3106 if (mem_pressure < upgrade_pressure) {
3107 level = upgrade_level(level);
3108 if (debug_process_killing) {
3109 ALOGI("Event upgraded to %s", level_name[level]);
3110 }
3111 }
3112 }
3113
3114 // If we still have enough swap space available, check if we want to
3115 // ignore/downgrade pressure events.
3116 if (mi.field.free_swap >=
3117 mi.field.total_swap * swap_free_low_percentage / 100) {
3118 // If the pressure is larger than downgrade_pressure lmk will not
3119 // kill any process, since enough memory is available.
3120 if (mem_pressure > downgrade_pressure) {
3121 if (debug_process_killing) {
3122 ALOGI("Ignore %s memory pressure", level_name[level]);
3123 }
3124 return;
3125 } else if (level == VMPRESS_LEVEL_CRITICAL && mem_pressure > upgrade_pressure) {
3126 if (debug_process_killing) {
3127 ALOGI("Downgrade critical memory pressure");
3128 }
3129 // Downgrade event, since enough memory available.
3130 level = downgrade_level(level);
3131 }
3132 }
3133
3134 do_kill:
3135 if (low_ram_device) {
3136 /* For Go devices kill only one task */
3137 if (find_and_kill_process(level_oomadj[level], NULL, &mi, &wi, &curr_tm) == 0) {
3138 if (debug_process_killing) {
3139 ALOGI("Nothing to kill");
3140 }
3141 }
3142 } else {
3143 int pages_freed;
3144 static struct timespec last_report_tm;
3145 static unsigned long report_skip_count = 0;
3146
3147 if (!use_minfree_levels) {
3148 /* Free up enough memory to downgrate the memory pressure to low level */
3149 if (mi.field.nr_free_pages >= low_pressure_mem.max_nr_free_pages) {
3150 if (debug_process_killing) {
3151 ALOGI("Ignoring pressure since more memory is "
3152 "available (%" PRId64 ") than watermark (%" PRId64 ")",
3153 mi.field.nr_free_pages, low_pressure_mem.max_nr_free_pages);
3154 }
3155 return;
3156 }
3157 min_score_adj = level_oomadj[level];
3158 }
3159
3160 pages_freed = find_and_kill_process(min_score_adj, NULL, &mi, &wi, &curr_tm);
3161
3162 if (pages_freed == 0) {
3163 /* Rate limit kill reports when nothing was reclaimed */
3164 if (get_time_diff_ms(&last_report_tm, &curr_tm) < FAIL_REPORT_RLIMIT_MS) {
3165 report_skip_count++;
3166 return;
3167 }
3168 }
3169
3170 /* Log whenever we kill or when report rate limit allows */
3171 if (use_minfree_levels) {
3172 ALOGI("Reclaimed %ldkB, cache(%ldkB) and free(%" PRId64 "kB)-reserved(%" PRId64 "kB) "
3173 "below min(%ldkB) for oom_score_adj %d",
3174 pages_freed * page_k,
3175 other_file * page_k, mi.field.nr_free_pages * page_k,
3176 zi.totalreserve_pages * page_k,
3177 minfree * page_k, min_score_adj);
3178 } else {
3179 ALOGI("Reclaimed %ldkB at oom_score_adj %d", pages_freed * page_k, min_score_adj);
3180 }
3181
3182 if (report_skip_count > 0) {
3183 ALOGI("Suppressed %lu failed kill reports", report_skip_count);
3184 report_skip_count = 0;
3185 }
3186
3187 last_report_tm = curr_tm;
3188 }
3189 if (is_waiting_for_kill()) {
3190 /* pause polling if we are waiting for process death notification */
3191 poll_params->update = POLLING_PAUSE;
3192 }
3193 }
事件通知
PSI
使用psi_memstall_enter和psi_memstall_leave包裹相关内存操作，实现事件信息统计。这些操作有以下几种：
kernel/msm-4.14/mm/vmscan.c
在try_to_free_mem_cgroup_pages函数中，调用do_try_to_free_pages进行内存回收的时候
kswapd在调用balance_pgdat进行内存回收的时候
kernel/msm-4.14/mm/compaction.c
kcompactd函数在进行内存压缩的时候
kernel/msm-4.14/mm/page_alloc.c
调用__alloc_pages_direct_compact进行内存压缩的时候
调用__perform_reclaim进行内存回收的时候
kernel/msm-4.14/mm/filemap.c
调用wait_on_page_locked，等待文件页就绪的时候
//满足注册条件后开始上报
vmpressure
通过以下几条路径触发事件的上报：
kernel/msm-4.14/mm/vmscan.c:
//分配物理页时，水位不满足要求，触发内存回收时上报
__alloc_pages ->__alloc_pages_nodemask -> get_page_from_freelist
-> node_reclaim -> __node_reclaim -> shrink_node -> vmpressure
//分配物理页时，进入slow path，进行直接内存回收的过程中上报
__alloc_pages -> __alloc_pages_nodemask -> __alloc_pages_slowpath
-> __alloc_pages_direct_reclaim -> __perform_reclaim -> try_to_free_pages
-> do_try_to_free_pages -> shrink_zones -> shrink_node -> vmpressure
//回收cgroup内存的过程中上报
try_to_free_mem_cgroup_pages -> do_try_to_free_pages -> shrink_zones
-> shrink_node -> vmpressure
//分配物理页时，进入slow path，唤醒kswapd，kswapd在回收内存的过程中上报
kswapd -> balance_pgdat -> kswapd_shrink_node -> shrink_node -> vmpressure
//vmpressure中进行事件上报
其中存在变量 vmpressure_win = SWAP_CLUSTER_MAX*16;
内核psi 实现
kernel-4.19/kernel/sched/psi.c
1287 static int __init psi_proc_init(void)
1288 {
1289 proc_mkdir("pressure", NULL);
1290 proc_create("pressure/io", 0, NULL, &psi_io_fops);
1291 proc_create("pressure/memory", 0, NULL, &psi_memory_fops);
1292 proc_create("pressure/cpu", 0, NULL, &psi_cpu_fops);
1293 return 0;
1294 }
1295 module_init(psi_proc_init);
参考
https://cloud.tencent.com/developer/article/2003334
内核vmpressure
原生Linux内核是把vmpressure和CONFIG_MEMCG绑定的，是给用户态用的。
参考
扫一扫
703
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
