树莓派3B+ LCD-show

3B+ LCD-show 驱动下载

 

https://github.com/goodtft/LCD-show

1.)Step1, Install Raspbian official mirror 

a)Download Raspbian official mirror:
https://www.raspberrypi.org/downloads/
b)Use“SDFormatter.exe”to Format your TF Card
c)Use“Win32DiskImager.exe” Burning mirror to TF Card

2.) Step2, Clone my repo onto your pi

Use SSH to connect the raspberry pi, 
And Ensure that the raspberry pi is connected to the Internet before executing the following commands:

sudo rm -rf LCD-show
git clone https://github.com/goodtft/LCD-show.git
chmod -R 755 LCD-show
cd LCD-show/

3.)Step3, According to your LCD's type, excute:

In case of 2.4" RPi Display(MPI2401)
sudo ./LCD24-show

In case of 2.8" RPi Display(MPI2801)
sudo ./LCD28-show

In case of 3.2" RPi Display(MPI3201)
sudo ./LCD32-show

In case of 3.5inch RPi Display(MPI3501)
sudo ./LCD35-show

In case of 3.5" HDMI Display-B(MPI3508)
sudo ./MPI3508-show

In case of 3.2" High Speed display(MHS32)
sudo ./MHS32-show

In case of 3.5" High Speed display(MHS35)
sudo ./MHS35-show

In case of 4.0" High Speed display(MHS40)
sudo ./MHS40-show

In case of 4.0" HDMI Display(MPI4008)
sudo ./MPI4008-show

In case of 5inch HDMI Display-B(Capacitor touch)(MPI5001):
sudo ./MPI5001-show


In case of 5inch HDMI Display(Resistance touch)(MPI5008)
sudo ./LCD5-show

In case of 7inch HDMI Display-B-800X480(MPI7001)
sudo ./LCD7B-show

In case of 7inch HDMI Display-C-1024X600(MPI7002)
sudo ./LCD7C-show


If you need to switch back to the traditional HDMI display
sudo ./LCD-hdmi

Wait a few minutes,the system will restart automaticall , enjoy with your LCD.

The LCD-show.tar.gz also can be download from: http://www.lcdwiki.com/RaspberryPi-LCD-Driver 

 

 

设置显示方向

安装完触摸驱动后，可以通过运行以下命令修改屏幕旋转方向。
§  旋转0度：
1.  cd LCD-show/
2.  ./LCD35-show 0
§  旋转90度：
1.  cd LCD-show/
2.  ./LCD35-show 90
§  旋转180度：
1.  cd LCD-show/
2.  ./LCD35-show 180
§  旋转270度：
1.  cd LCD-show/
2.  ./LCD35-show 270