Android adb shell am/pm使用

Android_adb shell am/pm使用


adb shell am instrument [options] <COMPONENT>

作用:启动对instrument实例的监视。

参数[options]:

-e <key> <value> // -e选项需要放在-w选项之前

作用:提供了以键值对形式存在的测试选项。Android中提供了多种键值对,具体参见下表。
举例:-e class com.android.phone.FIncomingCallTests#testRejectCall

-r

作用:以原始形式输出测试结果。该选项通常是在性能测试时与-e perf true一起使用。

参数 <COMPONENT>:

-w <test_package_name>/<runner_class> //<test_package_name>和<runner_class>在测试工程的AndroidManifest.xml中查找

作用:保持adb shell打开直至测试完成
举例:-w com.android.phone.tests/com.android.phone.runners.FunctionalTestRunner

<key> <value>参考表

KeyValueDescription
package<Java_package_name>The fully-qualified Java package name for one of the packages in the test application. Any test case class that uses this package name is executed. Notice that this is not an Androidpackage name; a test package has a single Android package name but may have several Java packages within it.
class<class_name>The fully-qualified Java class name for one of the test case classes. Only this test case class is executed.
<class_name>#method nameA fully-qualified test case class name, and one of its methods. Only this method is executed. Note the hash mark (#) between the class name and the method name.
functrueRuns all test classes that extendInstrumentationTestCase.
unittrueRuns all test classes that do not extend eitherInstrumentationTestCase orPerformanceTestCase.
size[small | medium |large]Runs a test method annotated by size. The annotations are @SmallTest,@MediumTest, and @LargeTest.
perftrueRuns all test classes that implementPerformanceTestCase. When you use this option, also specify the -r flag for am instrument, so that the output is kept in raw format and not re-formatted as test results.
debugtrueRuns tests in debug mode.
logtrueLoads and logs all specified tests, but does not run them. The test information appears inSTDOUT. Use this to verify combinations of other filters and test specifications.
emmatrueRuns an EMMA code coverage analysis and writes the output to /data//coverage.econ the device. To override the file location, use the coverageFile key that is described in the following entry.

Note: This option requires an EMMA-instrumented build of the test application, which you can generate with the coveragetarget.

coverageFile<filename>

Overrides the default location of the EMMA coverage file on the device. Specify this value as a path and filename in UNIX format. The default filename is described in the entry for the emma key

 

adb shell am start [options] <INTENT>

作用:启动一个activity

举例:adb shell am start -a com.lt.test.action.SECOND

举例:adb shell am start -n com.lt.test/.MyActivity

说明:[options]与<INTENT>参见 http://developer.android.com/tools/help/adb.html#am

adb shell am startservice [options] <INTENT>

作用:启动一个service

举例:adb shell am startservice -a com.lt.test.action.ONESERVICE
举例:adb shell am startservice -n com.lt.test/.MyService

 

adb shell am force-stop <PACKAGE>
作用:强制关闭一个应用程序

举例:adb shell am force-stop com.lt.test

 

adb shell am broadcast [options] <INTENT>

作用:发送一个广播
举例:adb shell am broadcast -a "action_finish" (发送一个广播去关闭一个activity)
举例:adb shell am broadcast -a android.intent.action.MASTER_CLEAR(恢复出厂设置的方法,会清除内存所有内容)

举例:adb shell am broadcast -n com.lt.test/.MyBroadcast

 

adb shell pm list packages [options] <INTENT>

作用:列举出所有包含<INTENT>的package

举例:adb shell pm list packages com.lt

说明:[options]与<INTENT>参见 http://developer.android.com/tools/help/adb.html#pm

<think>我们被要求使用Java代码在Android应用中执行ADB命令:`adb shell am start -n com.android.launcher3/.Launcher` 注意:在Android应用中执行shell命令需要具有相应的权限(例如root权限),否则可能无法执行。 在Android应用中执行shell命令,通常使用`Runtime.getRuntime().exec()`或`ProcessBuilder`。但是,由于`am`命令是shell命令,我们需要以shell用户的身份执行。 然而,需要注意的是,普通应用没有权限执行`am`命令,除非设备已root,或者应用被授予了shell权限(这通常只适用于系统应用或通过特定签名安装的应用)。 以下是在Android应用中使用Java代码执行该命令的步骤: 1. 使用`Runtime.getRuntime().exec()`执行命令。 2. 由于`am`命令是`adb shell`的一部分,我们直接执行`am start ...`可能会遇到权限问题。因此,我们通常使用`sh`来执行。 但是,在非root设备上,普通应用只能执行一些不需要特殊权限的shell命令。而`am`命令需要`android.permission.INTERACT_ACROSS_USERS_FULL`权限,普通应用通常没有这个权限。 因此,如果应用是系统应用(安装在/system/app下)或者设备已root,那么可以尝试执行。 以下代码展示了如何执行shell命令: 注意:在非root设备上,此命令可能不会成功。 代码示例: ```java try { // 执行命令: am start -n com.android.launcher3/.Launcher Process process = Runtime.getRuntime().exec("am start -n com.android.launcher3/.Launcher"); // 如果需要读取输出,可以获取输入流 BufferedReader reader = new BufferedReader(new InputStreamReader(process.getInputStream())); String line; while ((line = reader.readLine()) != null) { Log.d("ADB_COMMAND", line); } int exitCode = process.waitFor(); Log.d("ADB_COMMAND", "Exited with code: " + exitCode); } catch (Exception e) { e.printStackTrace(); } ``` 但是,上述代码在普通应用上运行会抛出异常或者没有权限,因为普通应用没有执行`am`命令的权限。 替代方案:如果只是希望启动Launcher,其实不需要使用ADB命令。在Android中,我们可以使用Intent来启动Launcher。 启动Launcher的Intent通常是: ```java Intent intent = new Intent(Intent.ACTION_MAIN); intent.addCategory(Intent.CATEGORY_HOME); startActivity(intent); ``` 这样就会显示Launcher(即桌面)。注意,如果有多个Launcher,系统会让用户选择一个。 但是,如果用户希望启动特定的Launcher(如com.android.launcher3),则可以使用: ```java Intent intent = new Intent(); intent.setComponent(new ComponentName("com.android.launcher3", "com.android.launcher3.Launcher")); startActivity(intent); ``` 注意:这种方式需要声明权限吗?实际上,启动其他应用的Activity需要该Activity是导出的(exported)。通常Launcher的Activity是导出的,因为它是系统的入口。 但是,如果指定的包名和类名不存在,或者没有导出,则会抛出异常。因此,我们需要捕获异常。 另外,还需要在AndroidManifest.xml中声明启动其他应用的权限?实际上,启动其他应用的Activity不需要声明权限,除非目标Activity有权限要求。但通常启动Launcher不需要特殊权限。 所以,如果只是要启动Launcher,建议使用标准的Intent方式,而不是执行ADB命令。 总结: 1. 在普通应用中使用`Runtime.getRuntime().exec()`执行`am`命令通常不可行,因为权限不足。 2. 推荐使用Intent启动Launcher。 如果用户坚持要执行ADB命令(例如在root设备上),那么可以尝试使用su命令来提升权限: ```java try { Process process = Runtime.getRuntime().exec("su"); DataOutputStream os = new DataOutputStream(process.getOutputStream()); os.writeBytes("am start -n com.android.launcher3/.Launcher\n"); os.writeBytes("exit\n"); os.flush(); process.waitFor(); } catch (Exception e) { e.printStackTrace(); } ``` 注意:这需要设备已经root,并且应用已经获取了root权限(用户授权)。 因此,根据应用的具体情况(是否是系统应用、是否root)选择合适的方法。 参考文献: [^1]: 引用示例中提到了启动Settings的命令:`adb shell am start com.android.settings/com.android.settings.Settings`,这和我们启动Launcher的命令类似。 [^2]: 引用示例中提到了启动MainActivity的命令格式:`adb shell am start -n "com.demo.test/com.demo.test.MainActivity"`,注意包名和Activity全路径名。 [^4]: 引用示例中提到了一个错误:`Error: Activity class ... does not exist.`,这可能是由于Activity类路径错误或未安装应用导致的。 因此,在编写代码时,如果使用Intent,要确保包名和类名正确,且目标Activity存在且导出。 下面,我们将分别给出两种方法的代码示例: 方法一:使用Intent启动Launcher(推荐) ```java // 启动默认的Launcher(系统会弹出选择器,如果只有一个则直接启动) Intent intent = new Intent(Intent.ACTION_MAIN); intent.addCategory(Intent.CATEGORY_HOME); startActivity(intent); // 或者启动特定的Launcher(如com.android.launcher3) try { Intent intent2 = new Intent(); intent2.setComponent(new ComponentName("com.android.launcher3", "com.android.launcher3.Launcher")); startActivity(intent2); } catch (ActivityNotFoundException e) { // 处理异常,例如该Launcher未安装或未导出 e.printStackTrace(); } ``` 方法二:在root设备上使用shell命令(需要root权限) ```java public void executeRootCommand(String command) { try { Process process = Runtime.getRuntime().exec("su"); DataOutputStream os = new DataOutputStream(process.getOutputStream()); os.writeBytes(command + "\n"); os.writeBytes("exit\n"); os.flush(); process.waitFor(); } catch (Exception e) { e.printStackTrace(); } } // 调用 executeRootCommand("am start -n com.android.launcher3/.Launcher"); ``` 注意:方法二需要用户授权root权限,且不同设备的root方式可能不同,因此不是所有设备都适用。 最后,根据用户需求,如果用户明确要求使用Java执行ADB命令,那么我们需要告知用户权限问题,并提供替代方案。 相关问题: 1.Android应用中执行shell命令需要什么权限? 2. 如何在没有root权限的情况下启动其他应用的Activity? 3. 使用Intent启动Launcher和通过ADB命令启动有什么区别? 4. 如何避免启动特定Launcher时出现ActivityNotFoundException?</think>在Android应用中通过Java执行ADB命令启动Launcher需要特殊权限,普通应用无法直接执行。以下是两种实现方案及注意事项: ### ⚠️ 关键限制 1. **需要root权限或系统签名**:普通应用无法执行`am`命令(需`INTERACT_ACROSS_USERS`权限) 2. **高版本Android限制更严格**:Android 10+对后台启动Activity有额外限制 3. **替代方案更安全**:推荐使用标准Intent方式启动Launcher ### 方案一:使用Intent启动Launcher(推荐) 无需特殊权限,兼容所有Android版本: ```java // 启动系统默认Launcher Intent homeIntent = new Intent(Intent.ACTION_MAIN); homeIntent.addCategory(Intent.CATEGORY_HOME); homeIntent.setFlags(Intent.FLAG_ACTIVITY_NEW_TASK); startActivity(homeIntent); // 启动特定Launcher(如com.android.launcher3) try { Intent specificLauncher = new Intent(); specificLauncher.setComponent(new ComponentName( "com.android.launcher3", "com.android.launcher3.Launcher" )); specificLauncher.addFlags(Intent.FLAG_ACTIVITY_NEW_TASK); startActivity(specificLauncher); } catch (ActivityNotFoundException e) { // 处理Launcher未安装的情况 } ``` ### 方案二:通过Shell执行命令(需root) 仅适用于已root设备或系统应用: ```java public void executeAdbCommand() { new Thread(() -> { try { // 请求root权限执行命令 Process process = Runtime.getRuntime().exec("su"); DataOutputStream os = new DataOutputStream(process.getOutputStream()); // 写入am命令 os.writeBytes("am start -n com.android.launcher3/.Launcher\n"); os.writeBytes("exit\n"); os.flush(); // 检查执行结果 int exitCode = process.waitFor(); if (exitCode != 0) { Log.e("ADB_CMD", "命令执行失败"); } } catch (Exception e) { e.printStackTrace(); } }).start(); } ``` ### 常见错误处理 1. **权限不足错误**: ```log java.lang.SecurityException: Permission Denial ``` **解决方案**:仅系统应用可使用此方式,或使用方案一 2. **Activity不存在错误**: ```log Error: Activity class {com.android.launcher3/com.android.launcher3.Launcher} does not exist ``` **解决方案**: - 确认设备是否安装该Launcher:`adb shell pm list packages | grep launcher` - 检查Activity名称是否匹配(不同厂商可能不同) 3. **Android 10+后台限制**: ```log Background activity start from package ... not allowed ``` **解决方案**: - 确保命令在前台执行 - 添加`-D`参数:`am start -D -n ...` ### 注意事项 1. **厂商兼容性**:部分厂商(华为、小米)修改了Launcher包名 2. **AndroidManifest权限**:即使root也需声明 ```xml <uses-permission android:name="android.permission.INTERACT_ACROSS_USERS" /> ``` 3. **安全性风险**:root操作可能导致系统不稳定 ---
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值