Linux proc status man

本文介绍了/proc/[pid]/status文件,它以易解析格式提供了/proc/[pid]/stat和/proc/[pid]/statm中的很多信息。还给出了示例,并详细解释了各字段含义,如进程名、状态、线程组ID、虚拟内存大小等。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

 /proc/[pid]/status               Provides much of the information in /proc/[pid]/stat and /proc/[pid]/statm in a format that's easier for humans to parse.  Here's an example:                   $ cat /proc/$$/status                   Name:   bash                   State:  S (sleeping)                   Tgid:   3515                   Pid:    3515                   PPid:   3452                   TracerPid:      0                   Uid:    1000    1000    1000    1000                   Gid:    100     100     100     100                   FDSize: 256                   Groups: 16 33 100                   VmPeak:     9136 kB                   VmSize:     7896 kB                   VmLck:         0 kB                   VmPin:         0 kB                   VmHWM:      7572 kB                   VmRSS:      6316 kB                   VmData:     5224 kB                   VmStk:        88 kB                   VmExe:       572 kB                   VmLib:      1708 kB                   VmPMD:         4 kB                   VmPTE:        20 kB                   VmSwap:        0 kB                   Threads:        1                   SigQ:   0/3067                   SigPnd: 0000000000000000                   ShdPnd: 0000000000000000                   SigBlk: 0000000000010000                   SigIgn: 0000000000384004                   SigCgt: 000000004b813efb                   CapInh: 0000000000000000                   CapPrm: 0000000000000000                   CapEff: 0000000000000000                   CapBnd: ffffffffffffffff                   CapAmb:   0000000000000000                   Seccomp:        0                   Cpus_allowed:   00000001                   Cpus_allowed_list:      0                   Mems_allowed:   1                   Mems_allowed_list:      0                   voluntary_ctxt_switches:        150                   nonvoluntary_ctxt_switches:     545               The fields are as follows:               * Name: Command run by this process.               * State: Current state of the process.  One of "R (running)", "S (sleeping)", "D (disk sleep)", "T (stopped)", "T (tracing stop)", "Z (zombie)", or "X (dead)".               * Tgid: Thread group ID (i.e., Process ID).               * Pid: Thread ID (see gettid(2)).               * PPid: PID of parent process.               * TracerPid: PID of process tracing this process (0 if not being traced).               * Uid, Gid: Real, effective, saved set, and filesystem UIDs (GIDs).               * FDSize: Number of file descriptor slots currently allocated.               * Groups: Supplementary group list.               * VmPeak: Peak virtual memory size.               * VmSize: Virtual memory size.               * VmLck: Locked memory size (see mlock(3)).               * VmPin: Pinned memory size (since Linux 3.2).  These are pages that can't be moved because something needs to directly access physical memory.               * VmHWM: Peak resident set size ("high water mark").               * VmRSS: Resident set size.               * VmData, VmStk, VmExe: Size of data, stack, and text segments.               * VmLib: Shared library code size.               * VmPTE: Page table entries size (since Linux 2.6.10).               * VmPMD: Size of second-level page tables (since Linux 4.0).               * VmSwap: Swapped-out virtual memory size by anonymous private pages; shmem swap usage is not included (since Linux 2.6.34).               * Threads: Number of threads in process containing this thread.               * SigQ: This field contains two slash-separated numbers that relate to queued signals for the real user ID of this process.  The first of these is the number of cur‐                 rently queued signals for this real user ID, and the second is the resource limit on the number of  queued  signals  for  this  process  (see  the  description  of                 RLIMIT_SIGPENDING in getrlimit(2)).               * SigPnd, ShdPnd: Number of signals pending for thread and for process as a whole (see pthreads(7) and signal(7)).               * SigBlk, SigIgn, SigCgt: Masks indicating signals being blocked, ignored, and caught (see signal(7)).               * CapInh, CapPrm, CapEff: Masks of capabilities enabled in inheritable, permitted, and effective sets (see capabilities(7)).               * CapBnd: Capability Bounding set (since Linux 2.6.26, see capabilities(7)).               * CapAmb: Ambient capability set (since Linux 4.3, see capabilities(7)).               * Seccomp:  Seccomp  mode of the process (since Linux 3.8, see seccomp(2)).  0 means SECCOMP_MODE_DISABLED; 1 means SECCOMP_MODE_STRICT; 2 means SECCOMP_MODE_FILTER.                 This field is provided only if the kernel was built with the CONFIG_SECCOMP kernel configuration option enabled.               * Cpus_allowed: Mask of CPUs on which this process may run (since Linux 2.6.24, see cpuset(7)).               * Cpus_allowed_list: Same as previous, but in "list format" (since Linux 2.6.26, see cpuset(7)).               * Mems_allowed: Mask of memory nodes allowed to this process (since Linux 2.6.24, see cpuset(7)).               * Mems_allowed_list: Same as previous, but in "list format" (since Linux 2.6.26, see cpuset(7)).               * voluntary_ctxt_switches, nonvoluntary_ctxt_switches: Number of voluntary and involuntary context switches (since Linux 2.6.23).

<think>好的,我现在需要帮用户查找与“proc-gs”相关的技术信息、工具或框架。首先,我得确定“proc-gs”具体指的是什么,因为这个词看起来可能涉及多个领域。 用户提供的引用中有提到进程状态管理(比如fork/exec/wait/exit),这可能和Linux的进程控制有关。在Linux系统中,/proc目录包含了很多系统和进程的信息,所以“proc”可能指的是这个虚拟文件系统。而“gs”可能有多种含义,比如寄存器(GS寄存器在x86架构中用于段寄存器),或者是某种工具或项目的缩写。 接下来,我应该检查是否有常见的工具或框架以“proc-gs”命名。可能用户拼写有误,或者是某个特定领域的术语。例如,在安全领域(如引用1提到的pwn),可能涉及进程调试或内存分析工具。或者,在系统监控或性能分析工具中,可能有类似名称的工具。 另外,引用3提到了pwntools,这是一个用于CTF和漏洞开发的Python库。或许“proc-gs”和pwntools中的某个功能模块有关?需要查看pwntools的文档是否有相关部分。但根据引用3的链接,官网文档里没有直接提到proc-gs。 考虑到/proc文件系统,用户可能是在寻找与读取或分析/proc下文件相关的工具,比如gsutils或其他工具。但常见的工具有procps(包含ps、top等),或者systemtap之类的动态跟踪工具。不过这些都不直接匹配“proc-gs”。 也有可能用户指的是内核中的某个功能或补丁,比如与进程管理或安全相关的。例如,GS(Guard Stack)是一种安全机制,用于防止栈溢出攻击,可能与内核的防护机制有关。但通常称为Stack Canary,而不是proc-gs。 如果用户拼写有误,可能需要建议可能的正确名称。例如,“procps-gs”或“gproc”之类的变体。或者,可能涉及Go语言中的proc包,但不太确定。 最后,如果确实没有找到相关信息,可能需要建议用户检查拼写或提供更多上下文。同时,可以推荐一些常用的进程分析工具,如strace、gdb、ltrace等,这些工具在调试和分析进程时非常有用。</think>关于“proc-gs”的技术信息,目前没有直接匹配的知名工具或框架。以下是基于可能的关联方向的分析和建议: --- ### 1. **与Linux系统/进程相关的可能性** - **/proc文件系统**:Linux的`/proc`目录包含进程和系统状态的虚拟文件,例如`/proc/[pid]/status`记录进程状态。若涉及“gs”,可能与以下相关: - **GS寄存器**:在x86架构中,`GS`是段寄存器,用于线程本地存储(TLS)或内核数据结构访问。调试工具(如GDB)可查看寄存器状态。 - **工具建议**:使用`gdb`调试进程时,可通过`info registers gs`查看GS寄存器值;通过`cat /proc/[pid]/maps`分析进程内存布局。 - **相关工具**: - **procps工具集**:包含`ps`、`top`、`vmstat`等,用于监控进程和系统状态[^2]。 - **strace**:跟踪进程的系统调用和信号。 --- ### 2. **安全/漏洞利用领域的关联** - **Pwntools中的GS机制**:在漏洞利用中,GS可能指代防护机制(如StackGuard),但通常称为“Stack Canary”。Pwntools支持绕过此类防护[^1][^3]。 - 示例代码(检测Canary): ```python from pwn import * context.log_level = 'debug' p = process('./vulnerable_binary') p.sendline(cyclic(100)) p.wait() core = p.corefile canary = core.read(core.rsp + offset, 4) ``` --- ### 3. **可能的拼写修正或扩展** - **proc-gs**:若拼写不完整,可能是: - **procstat**:BSD系统工具,用于监控进程(类似Linux的`ps`)。 - **gdb插件**:如GEF、Peda,支持更直观的寄存器/内存分析。 --- ### 推荐工具和资源 | 工具 | 用途 | 参考文档 | |---------------|-----------------------------|----------------------------| | **GDB** | 动态调试进程,查看寄存器/内存 | [GDB手册](https://sourceware.org/gdb/current/onlinedocs/gdb/) | | **Pwntools** | 编写漏洞利用脚本,与进程交互 | [官网文档](http://pwntools.readthedocs.io/)[^3] | | **strace** | 跟踪进程的系统调用 | `man strace` | --- ### 相关问题 1. 如何通过`/proc`文件系统分析进程的内存映射? 2. Pwntools中如何绕过Stack Canary防护机制? 3. 在Linux中,如何实时监控进程的状态变化? 若需进一步澄清“proc-gs”的具体场景,请提供更多上下文。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值