How to Root Galaxy Tab 2 10.1 P5100 on Android 4.1.1 Jelly Bean Official Firmware

How to Root Galaxy Tab 2 10.1 P5100 on Android 4.1.1 Jelly Bean Official Firmware

9 Jan 2013

Earlier today we have covered that Samsung has released Android 4.1.1 Jelly Bean firmware for Galaxy Tab 2 10.1 P5100.
If you want to have root access to your tablet then good news for you as you can now root your Galaxy Tab 2 10.1 P5100 on Android 4.1.1 Jelly Bean Firmware.

 

Before you proceed with guide below, make sure:

1.You have installed your Galaxy Tab 2 P5100 USB drivers on your PC.
2.You need to enable USB debugging mode which is deactivated by default.
3.You tablet should have 70-80% charge remaining.
4.Backup your important data like Call logs, SMS and other data in stored in phone memory so in case if anything goes wrong, your data is not hurt.
5.The update is only meant for Galaxy Tab 2 P5100, so don’t try it on other variants.
How to Root Galaxy Tab 2 10.1 P5100 on Android 4.1.1 Jelly Bean Firmware
Step 1) DownloadCF-Auto-Root for Galaxy Tab 2 P5100.

Step 2) DownloadODIN v3.07.

Step 3) Turn OFF your mobile and go to Download Mode by pressing and holding the Volume UP + Power button until you see Android logo with triangles on screen.

Step 4) Now open ODIN on your PC and connect your Galaxy Tab 2 P5100 to your computer.

Step 5) Once your phone is successfully connected to your PC, the ID:COM box on ODIN will turn yellow and will show the COM port number.

Step 6) Select the downloaded file to install by following below steps:

?Click on PDA and select CF-Auto-Root-espresso1orf-espresso1orfxx-gtp5100.tar.md5 file.
Step 7) Make sure the Auto Reboot and F.Reset Time options are checked in ODIN.

Step 8) Click on Start button in ODIN window to start the installation process. The process will take few minutes to complete.

Step 9) When the installation is completed, your phone will restart.

That’s it. You have successfully rooted your Galaxy Tab 2 P5100 on Android 4.1.1 Jelly Bean firmware.

 

先贴原文地址(英文好的可以直接看原文）：http://genius-tips.com/how-to-root-galaxy-tab-2-10-1-p5100-on-android-4-1-1-jelly-bean-official-firmware/
---------------------------------------------------分割线--------------------------------------------------
第一次ROOT的小白请参看原文的注意事项，直接google translate就行，我就不翻译了。
非P5100请慎重尝试。

Step 1) 下载CF-Auto-Root for Galaxy Tab 2 P5100. （http://download.chainfire.eu/240/CF-Root/CF-Auto-Root/CF-Auto-Root-espresso10rf-espresso10rfxx-gtp5100.zip）

Step 2) 下载ODIN v3.07. （http://www.mediafire.com/?7v7zor9d379emeg）

Step 3) 关机，长按电源键和音量增加键进入Download模式

Step 4) 打开ODIN，将平板连接至电脑

Step 5)一旦平板成功连接，ODIN的第一个格子会变蓝（原文有误，说的是变黄）

Step 6) 在PDA选项打勾，并选择CF-Auto-Root-espresso1orf-espresso1orfxx-gtp5100.tar.md5文件

Step 7) 确保 Auto Reboot 和 F.Reset Time 选项被勾选

Step 8) 点击Start开始ROOT，可能持续几分钟（其实1分钟不到）

Step 9) 成功后自动重启.

然后就搞定了！！！！