关于ST7920 12864LCD绘图模式中显示温湿度数据

各位老师好：
我是一位业余的单片机爱好者，学习单片机1年多时间，下面遇到一些问题，求帮助。
这里放一张lcd显示的画面，
从上面的画面中可以看出，已经读取到 两个ds18B20 和DHT11温湿度传感器的数据了。
但是还是有些文图需要解决，数据没有变化，。
我把表格去掉后，可以正常显示。
请各位老师给予指点。

下面放一些局部的代码：

#include<intrins.h>
#include "STC15F2K60S2.H"
#include<math.h>
typedef unsigned char uchar;
typedef unsigned char uint;

sbit RS = P3^5;
sbit RW = P3^6;
sbit E  = P3^7;
sbit RES = P4^1;
sbit PSB = P4^2;
//sbit beep = P4^4;

#define DataPort P0        //MCU P0<------> LCM

       
unsigned char code user16x16[]={
    //笑脸图片
0x0F,0xF0,0x10,0x08,0x20,0x04,0x40,0x02,0x9C,0x39,0xBE,0x7D,0x80,0x01,0x80,0x01,
0x80,0x01,0x88,0x11,0x84,0x21,0x43,0xC2,0x20,0x04,0x10,0x08,0x0F,0xF0,0x00,0x00,
};

// C:\Users\Administrator\Desktop\智能温室大棚 - 副本\画面1.BMP(0)
unsigned char code zhuamian[]={
   
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0x80,0x01,0x00,0x00,0x00,0x00,0x80,0x00,0x00,0x01,0x00,0x01,0x00,0x00,0x00,0x01,
0x80,0x21,0x00,0x00,0x00,0x00,0x80,0x00,0x00,0x01,0x00,0x01,0x00,0x00,0x00,0x01,
0xB0,0x51,0x00,0x00,0x00,0x00,0x80,0x00,0x00,0x01,0x0D,0xB1,0x00,0x00,0x00,0x01,
0xA8,0x51,0x00,0x00,0x00,0x00,0x80,0x00,0x00,0x01,0x12,0x41,0x00,0x00,0x00,0x01,
0xA4,0x71,0x00,0x00,0x00,0x30,0x80,0x00,0x00,0x01,0x12,0x41,0x00,0x00,0x00,0x01,
0xA2,0x51,0x00,0x00,0x00,0x30,0x80,0x00,0x00,0x01,0x09,0x21,0x00,0x00,0x00,0x09,
0xAD,0x71,0x00,0x00,0x00,0x0C,0x80,0x00,0x00,0x01,0x04,0x91,0x00,0x00,0x01,0x91,
0xAD,0x51,0x00,0x00,0x00,0x12,0x80,0x00,0x00,0x01,0x04,0x91,0x00,0x00,0x01,0xA1,
0xBF,0x71,0x00,0x00,0x00,0x20,0x80,0x00,0x00,0x01,0x1B,0x61,0x00,0x00,0x00,0x41,
0x80,0x51,0x00,0x00,0x00,0x20,0x80,0x00,0x00,0x01,0x00,0x01,0x00,0x00,0x00,0xB1,
0x80,0x89,0x00,0x00,0x00,0x20,0x80,0x00,0x00,0x01,0x3F,0xF9,0x00,0x00,0x01,0x31,
0x81,0x05,0x00,0x00,0x80,0x20,0x80,0x00,0x00,0x01,0x00,0x01,0x00,0x00,0x02,0x01,
0x81,0x05,0x00,0x00,0x00,0x12,0x80,0x00,0x00,0x01,0x3F,0xF9,0x00,0x00,0x00,0x01,
0x80,0xF9,0x00,0x00,0x00,0x0C,0x80,0x00,0x00,0x01,0x00,0x01,0x00,0x00,0x00,0x01,
0x80,0x01,0x00,0x00,0x00,0x00,0x80,0x00,0x00,0x01,0x00,0x01,0x00,0x00,0x00,0x01,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,<