How to Install Python 2.7.14 on Ubuntu & LinuxMint

本文档详细介绍了如何在Ubuntu、Debian及Linux Mint系统上安装Python 2.7.14版本的过程。首先需要确保安装了必要的依赖软件包,之后从官方网站下载Python 2.7.14源码包并进行解压。接着配置并编译源码,最后验证Python版本确认安装成功。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

This article will help you to install Python 2.7.14 on your Ubuntu, Debian and LinuxMint operating systems. At writing time of this article Python 3.4.5 latest stable version is available to download and install. To install Python 3.4.5 visit following article.

How to Install Python 3.4 on Ubuntu & LinuxMint

Step 1 – Prerequsiteis

You must have installed the following prerequisites on your system. Execute the following commands on your system to install all required dependencies to build Python 2.7.

sudo apt-get update
sudo apt-get install build-essential checkinstall
sudo apt-get install libreadline-gplv2-dev libncursesw5-dev libssl-dev libsqlite3-dev tk-dev libgdbm-dev libc6-dev libbz2-dev

Step 2 – Download Python 2.7.14

Download Python using following command from python official site. You can also download latest version in place of specified below.

cd /usr/src
sudo wget https://www.python.org/ftp/python/2.7.14/Python-2.7.14.tgz

Now extract the downloaded package.

sudo tar xzf Python-2.7.14.tgz

Step 3 – Compile Python Source

Use below set of commands to compile python source code on your system using altinstall.

cd Python-2.7.14
sudo ./configure --enable-optimizations
sudo make altinstall

make altinstall is used to prevent replacing the default python binary file /usr/bin/python.

Step 4 – Check Python Version

Check the latest version installed of python using below command

python2.7 -V

Python 2.7.14



### 安装Python 2.7.14UbuntuUbuntu操作系统上,默认情况下可能已经预装了某个版本的Python。然而,为了确保安装特定版本如Python 2.7.14,可以通过编译源码的方式来进行安装。 #### 下载Python 2.7.14源代码包 首先访问官方网站获取指定版本的压缩文件。对于Python 2.7.14而言,可从官方FTP服务器下载相应tarball文件[^4]。 ```bash wget https://www.python.org/ftp/python/2.7.14/Python-2.7.14.tgz ``` #### 解压并准备构建环境 解压缩下载下来的`.tgz`文件,并进入对应的目录: ```bash tar -xzf Python-2.7.14.tgz cd Python-2.7.14 ``` 在此之前,建议先更新系统的软件库列表以及安装必要的依赖项以便顺利完成编译过程: ```bash sudo apt-get update && sudo apt-get install -y build-essential checkinstall libreadline-gplv2-dev \ libncursesw5-dev libssl-dev libsqlite3-dev tk-dev libgdbm-dev libc6-dev libbz2-dev zlib1g-dev openssl \ libffi-dev ``` #### 编译与安装 完成上述准备工作之后,即可开始编译工作: ```bash ./configure --prefix=/usr/local/python2.7.14 --enable-shared LDFLAGS="-Wl,-rpath /usr/local/lib" make sudo make altinstall ``` 这里需要注意的是,在执行最后一步命令时选择了`altinstall`而非普通的`install`选项,这是为了避免覆盖系统自带或其他已存在的Python解释器二进制文件(即避免创建名为`python`的链接),从而防止潜在冲突的发生。 #### 验证安装成果 通过下面这条指令确认新安装的Python版本是否可用及其具体路径: ```bash /usr/local/python2.7.14/bin/python2.7 --version which python2.7 ``` 如果一切正常,则应该能够看到类似于`Python 2.7.14`这样的输出结果,并且第二个命令会返回之前设置的目标位置下的完整路径。 #### 设置软连接(可选) 为了让全局环境中可以直接调用这个版本而不必每次都输入完整的路径名,可以选择建立一个指向该实例的符号链接。不过这样做可能会引起与其他Python版本之间的兼容性问题,因此需谨慎操作: ```bash sudo ln -sf /usr/local/python2.7.14/bin/python2.7 /usr/bin/python2.7 ``` 此时再次运行`python2.7 --version`应当依旧显示为2.7.14版本的信息。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值