ajax有几种返回状态

高速SerDes均衡技术解析 均衡技术是高速SerDes链路中补偿信道损耗和失真的核心技术,通过FFE、CTLE和DFE三种主要方法对抗码间干扰(ISI)。FFE在发射端预补偿前光标干扰,CTLE通过提升高频增益补偿信道损耗,DFE则精准消除后光标干扰。三种技术各具优势:FFE实现简单且不放大噪声,CTLE功耗低易于集成,DFE能自适应调整且保持信噪比。这些技术协同工作可有效提升系统传输速率和可靠性。 阅读详情

ajax有几种返回状态,一下子惊呆了我

第一感觉是不是200,404这样的,一直是用jquery的ajax请求却不知道什么是ajax的返回状态,马上熟悉下并记录该知识点如下:

(0) UNINITIALIZED 
未初始化 
The object has been created but not initialized. (The open method has not been called.) 
(XMLHttpRequest)对象已经创建,但尚未初始化(还没有调用open方法)。 

(1) LOADING 
载入 
The object has been created, but the send method has not been called. 
(XMLHttpRequest)对象已经创建,但尚未调用send方法。 

(2) LOADED 
载入完成 
The send method has been called, but the status and headers are not yet available. 
已经调用send方法,(HTTP响应)状态及头部还不可用。 

(3) INTERACTIVE 
交互 
Some data has been received. Calling the responseBody and responseText properties at this state to obtain partial results will return an error, because status and response headers are not fully available. 
已经接收部分数据。但若在此时调用responseBody和responseText属性获取部分结果将会产生错误,因为状态和响应头部还不完全可用。 

(4) COMPLETED 
完成 
All the data has been received, and the complete data is available in the responseBody and responseText properties. 
已经接收到了全部数据,并且在responseBody和responseText属性中可以提取到完整的数据。 

. readyState 状态详解 readyState 状态 
状态说明 

(0)未初始化 
此阶段确认XMLHttpRequest对象是否创建,并为调用open()方法进行未初始化作好准备。值为0表示对象已经存在,否则浏览器会报错--对象不存在。 

(1)载入 
此阶段对XMLHttpRequest对象进行初始化,即调用open()方法,根据参数(method,url,true)完成对象状态的设置。并调用send()方法开始向服务端发送请求。值为1表示正在向服务端发送请求。 

(2)载入完成 
此阶段接收服务器端的响应数据。但获得的还只是服务端响应的原始数据,并不能直接在客户端使用。值为2表示已经接收完全部响应数据。并为下一阶段对数据解析作好准备。 

(3)交互 
此阶段解析接收到的服务器端响应数据。即根据服务器端响应头部返回的MIME类型把数据转换成能通过responseBody、responseText或responseXML属性存取的格式,为在客户端调用作好准备。状态3表示正在解析数据。 

(4)完成 
此阶段确认全部数据都已经解析为客户端可用的格式,解析已经完成。值为4表示数据解析完毕,可以通过XMLHttpRequest对象的相应属性取得数据。 


概而括之,整个XMLHttpRequest对象的生命周期应该包含如下阶段: 
创建-初始化请求-发送请求-接收数据-解析数据-完成 

恍然大悟,铭记之

OpenCV开发笔记(〇):使用mingw530_32编译openCV3.4.1源码,搭建Qt5.9.3的openCV开发环境 欢迎技术交流和帮助,提供IT相关服务,索要源码请联系博主QQ: 21497936,若该文为原创文章,未经允许不得转载 原博主博客地址:https://blog.csdn.net/qq21497936 本文章博客地址:https://blog.csdn.net/qq21497936/article/details/79641510 目录 OpenCV开发笔记(一):使用mingw530_32编译... 阅读详情

相关推荐

ArcGIS Pro2.5深度学习使用注意事项

ArcGIS Pro2.5深度学习使用中的注意事项1、ArcGIS Pro2.5深度学习使用中的注意事项1.1、Label深度学习样本工具参数介绍1.2、准备数据参数介绍1.3、训练模型介绍1.4、ArcGIS Pro2.5深度学习推理工具和模型对应关系介绍1.4.1、Classify Objects Using Deep Learning1.4.2、Classify Pixels Using D...

GIS哼哈哈的博客 7202

http状态码200,300,404详细说明

1开头的http状态码 表示临时响应并需要请求者继续执行操作的状态代码。 100 (继续) 请求者应当继续提出请求。 服务器返回此代码表示已收到请求的第一部分,正在等待其余部分。 101 (切换协议) 请求者已要求服务器切换协议,服务器已确认并准备切换。 2开头的http状态码 表示请求成功 200 成功处理了请求,一般情况下都是返回此状态码; 201 请求成功并且服务器创...

weixin_42878388的博客 1295

手把手教你构建轻量级CLIP模型:从理论到实践

本文手把手教你从零构建一个轻量级CLIP模型,深入解析其核心原理——对比学习,并提供完整的代码实践。通过精简的模型架构、数据准备和训练循环实现,帮助读者彻底理解多模态模型如何让图像与文本在共享空间中对齐,为学习更复杂的AI模型打下坚实基础。

weixin_29100927的博客 326

关于jQuery ajax 状态码status为0,一直返回error

问题:为struts2的form表单submit提交按钮设置点击事件,点击事件触发ajax异步处理,完成异步提交操作。但是一直出现status为0,一直返回error的错误。 function doInsert() { $.ajax({ url:'newsInsert.action', data:

你要悄悄的拔尖,然后惊艳所有人 3万+

Surface Pro 4/5/6/7保姆级黑苹果安装:从Windows分区到OC引导配置全流程(含EFI文件替换避坑)

本文详细介绍了在Surface Pro 4/5/6/7上安装黑苹果的全流程,包括Windows分区、OC引导配置和EFI文件替换等关键步骤。通过实战经验分享,帮助用户避开常见陷阱,实现Windows与macOS双系统完美共存,特别适合对黑苹果安装感兴趣的Surface Pro用户。

weixin_30300225的博客 1382

SAP PP未清生产订单关闭物料退料、新工单发料批量处理

( werks = '1001' lgort = 'A004' lgobe = '组装-成品组装' )( werks = '1002' lgort = 'C006' lgobe = '组装-二车间' )( werks = '1002' lgort = 'C007' lgobe = '组装-二车间' )( werks = '1001' lgort = 'A007' lgobe = '组装-MS' )( werks = '1001' lgort = 'A008' lgobe = '组装-GW' )

dingqing86的专栏 1194

Ajax返回的3个类型

使用Ajax异步返回的两种类型 Ajax = 异步 JavaScript 和 XML,Ajax 是一种用于创建快速动态网页的技术,通过在后台与服务器进行少量数据交换,Ajax 可以使网页实现异步更新。这意味着可以在不重新加载整个网页的情况下,对网页的某部分进行更新,传统的网页(不使用 Ajax)如果需要更新内容,必需重载整个网页面。看下图 传统的Ajax写法: /** * @function ...

chen_long的博客 1843

灵魂三问:因果推断

什么是因果推断?为什么研究因果推断?怎么进行因果推断研究?

ML OR 智能决策的博客 2907

ajax常用状态码

【代码】ajax常用状态码。

加金开发 1009

使用curl命令出现fatal: unable to access ‘https://github.com/nvm-sh/nvm.git/‘: Encountered end of file的解决方案

本文主要介绍了使用curl命令出现fatal: unable to access ‘https://github.com/nvm-sh/nvm.git/’: Encountered end of file的解决方案,希望能对使用curl命令的同学们有所帮助。 文章目录 1. 问题描述 2. 解决方案

weixin_43178406的博客 1万+

pyecharts在jupyter notebook中不能够渲染图表问题。

在使用jupyter notebook中使用pyecharts绘制可视化图表的时候,发现图表不能渲染到页面中,生成的html是没问题的,本文主要解决在jupyter notebook中不能渲染这个问题。

猿小白的博客 1170

常见的HTTP错误码的具体含义

100" : Continue "101" : witching Protocols "200" : OK "201" : Created "202" : Accepted "203" : Non-Authoritative Information "204" : No Co

shao.bing的专栏 1919

基于Simulink的超级电容与锂电池混合储能协调控制仿真

摘要:本文介绍基于Simulink的光伏-混合储能系统(HESS)建模与仿真方法,通过超级电容和锂电池的协同控制实现功率平抑。系统采用直流耦合架构,利用一阶低通滤波法将总功率分解为低频(锂电池承担)和高频分量(超级电容承担),并设计SOC自平衡机制维持超级电容工作点。仿真结果表明,该方案可使锂电池电流波动降低62%,光伏功率波动率降至7.5%,有效延长电池寿命。文章详细展示了从主电路搭建、功率分配到闭环控制的完整实现步骤,为新能源系统储能优化提供实用参考。

amy_mhd的博客 136

ajax 状态值与状态码

状态值与状态码的区别 ajax的状态值指,运行ajax时,无论是成功还是失败都要响应的步骤的几种状态。例如:尚未调用send()方法时的初始化前、正在发送请求、正在响应等,由ajax对象和服务器之间的交互所得。通过ajax.readyState获得 0~4 范围的一个状态值。 ajax状态码是指,ajax无论请求是否成功,由HTTP协议根据所提交的信息,服务器返回的http头信息代码,通过ajax.state属性来获得。 ajax状态值 ajax的 XMLHttpRequest 不是一次就完成的,而是经历过

亚丝娜 861

Outlook Express 6 (OE6) for Win7/Win8/Win10

英文版 Outlook Express6.0, 兼容Win7/Win10/WinXP,解压就可用。

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

java ajax 200错误_状态码为200时 jQuery ajax报错

1. 问题现象HTTP 状态码为 200 OK 时, jquery ajax报错2. 问题原因jquery ajax的dataType字段包含:json, 但是服务端返回的数据不是规范的json格式,导致jquery解析json字符串报错,最终导致ajax报错。jQuery ajax 官方文档上说明:"json": Evaluates the response as JSON and return...

weixin_31618799的博客 971

计算机控制技术及应用

《计算机控制技术及应用》通过总结作者的科研成果和吸收国内外的先进理论、方法和技术,以计算机控制系统的网络化、开放化、智能化和集成化发展趋势为主线索,主要介绍计算机控制系统的基本概念和计算机控制系统的典型形式,计算机控制系统的数学描述与基本分析方法,以及数字PID控制器、最少拍控制系统、达林算法、状态变量设计法等设计方法及其各种改进算法。重点突出计算机控制系统输入输出通道接口的设计方法和典型控制系统的设计案例与实现方法等。

ajax提交返回boolean类型

function validateEnameExsit() { var ename = $("#ename").val(); if($.trim(ename)=='') {     $("#result").attr('color','#FF0000');  $("#result").html('用户名不能为空'); return false; }else{ $.ajax({ u

u010974598的专栏 1万+

锂电池充电器电路设计 里面有电路

锂电池充电器电路设计 里面有电路 3.7V升压到5V电路设计。

php ajax session过期,关于ajax应用中session过期问题的几个解决方案

现在web开发中,ajax应用的比较多。关于此方面的框架也不少。在应用中都会遇到session过期的问题,如处理不当会影响用户体验,也有可能产生莫名的问题。结合自己的思考和网上相关内容的参考,给出如下解决方案。每个方案都有不同的优缺点,欢迎大家指正。方案1:检查AJAX返回的返回的内容是否有标签 在web系统中,当session过期时,当用户有操作的时候,此时系统一般会返回登陆...

weixin_39811842的博客 147

js判断wifi_使用JS在浏览器中判断当前网络连接状态的几种方法

使用JS在浏览器中判断当前网络状态的几种方法如下:1. navigator.onLine2. ajax请求3. 获取网络资源4. bind()1. navigator.onLine通过navigator.onLine判断当前网络状态:非常简单,但是并不准确-根据MDN的描述:navigator.onLine只会在机器未连接到局域网或路由器时返回false,其他情况下均返回true。也就是说,机器连...

weixin_39604598的博客 486

浅谈ajax技术[原创]

ajax实现了在不刷新整个界面的情况下去更新界面部分内容; 下面我就用自己所学知识的看法介绍一下ajax 早期页面加载一一部分的界面需要重新加载一遍浏览器,从新构建一遍dom tree; ajax原理:http异步通信协议; ajax并非一种新的技术,而是几种原有技术的结合体。它由下列技术组合而成。 判断浏览器创建ajax对象; var ajax; if (window.XMLH...

weixin_30657999的博客 153

AJAX状态值与状态码

在《Pragmatic Ajax A Web 2.0 Primer 》0: (Uninitialized) the send( ) method has not yet been invoked. 1: (Loading) the send( ) method has been invoked, request in progress. 2: (Loaded) the send( ) m

泡沫水灵灵的博客 516

ajax readyState的五种状态详解

0 - (未初始化)还没有调用send()方法 1 - (载入)已调用send()方法,正在发送请求 2 - (载入完成)send()方法执行完成,已经接收到全部响应内容 3 - (交互)正在解析响应内容 4 - (完成)响应内容解析完成,可以在客户端调用了 在《Pragmatic Ajax A Web 2.0 Primer 》中对readyStae状态的...

171

ajax返回状态码为零,ajax - HTTP请求返回状态码0时的含义是什么?

ajax - HTTP请求返回状态码0时的含义是什么?JavaScript网络调用(例如fetch或XMLHttpRequest)或任何其他类型的HTTP网络请求在HTTP状态代码为0时失败意味着什么?这似乎不是有效的HTTP状态代码,因为其他代码在HTTP规范中是三位数。我尝试完全拔掉网络作为测试。 它可能是不相关的,但导致状态代码17003(IIRC),粗略搜索建议意味着“DNS服务器查找...

weixin_35404745的博客 5181

jQuery - 拦截所有Ajax请求(统一处理超时、返回结果、错误状态码 )

jQuery - 拦截所有Ajax请求(统一处理超时、返回结果、错误状态码 ) 前言 通过 jQuery 提供的 ajaxSetup 方法,我们可以拦截页面上所有的 Ajax 请求响应(包括 .ajax、.ajax、.ajax、.post、$.get)。这样我们可以对这些 Ajax 请求响应做统一的处理。比如判断 sesion 是否失效,失效的话就跳转到登录页。下面通过几个样例进行演示。 原文出...

小半的博客 2万+

ajax调用返回200状态码,但依旧进error的问题

今天开发一个需求,用了ajax调用后台,之前没怎么用过,今天用了用结果还出问题了。。。 返回200但是依旧进入了error里面,写个记录记录一下省的以后忘了在找。 ajax方法 $.ajax({ type: "POST",// 请求方式 url:"http://localhost:8080/xxx.do",// 请求地址 data: { }, // 请求数据 dataType: "json", success: function(data) { // 请求成功时 }, erro

chord0112的博客 1652

ajax后退列表缓存,Ajax分页返回保留状态

前言有时候,我们会遇到类似这样的问题:当你在访问一个商城的商品列表页,看到了一个自己感兴趣的产品并点击进去查看详情,而看完后返回列表页的时候,某些浏览器并不会保留之前的阅读状态,而是会刷新页面,使列表回到顶部。但从用户体验的角度来说,我们期望的是返回后能够再次回到自己之前阅读的位置。方案概述进入详情页时,使用 sessionStorage.setItem() 存储状态返回列表页时,使用 sessi...

weixin_42308943的博客 307

ajax错误返回状态码,Ajax只请求返回错误,但状态码是200 OK

这里我有一个JavaScript文件的表单,该文件抓取输入并在单击按钮时使用jQuery的AJAX方法将其发送到瘦PHP页面。 PHP只需打印"Hello and welcome person_name",假设名称已设置,这正是我想要的。如果请求成功,我想在同一页面的div元素中显示该文本,如果失败,则显示alert。但如果它是错误的,我在div元素中显示"Error"文本。Ajax只请求返回错误...

weixin_39965102的博客 1224
上一篇: 关系数据库的三范式
下一篇: UML类图中的类之间关系
评论 1
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值