WinCE5.0中添加对硬盘支持

如题!

今天把那个ＩＤＥ转ＵＳＢ接到Ｓ３Ｃ２４４０上正常工作的８０ＧＢ硬盘(２.５寸笔记本硬盘，分有２个区，ＦＡＴ３２格式)，直接接到开发板的ＩＤＥ４４ｐｉｎ接口上，同时按照ＰＢ５。０的帮助文件添加了相关ＩＤＥ组件：(参见PB5.0帮助文件)“How to Configure Hard Disk Drives on a CEPC”
1.省略；
(添加硬盘驱动组件)
2.Add a driver for the hard disk drive.
Expand the Catalog node, navigate to Device Drivers/Storage Devices, and then choose ATAPI PCI/IDE Storage Block Driver.
Right-click on ATAPI PCI/IDE Storage Block Driver and choose Add to Platform.
- or -
Set SYSGEN_ATAPI.
３.省略；
(添加文件系统)
4.Add a file system for the hard disk drive.
Expand the Catalog node, navigate to Core OS/Windows CE Devices/File Systems and Data Store/Storage Manager, and then choose FAT File System. Right-click on FAT File System and choose Add to Platform.
- or -
Set SYSGEN_FATFS.

(添加存储控制面板组件)
5.Add the Storage Manager Control Panel Applet.
Expand the Catalog node, navigate to Core OS/Windows CE Devices/File Systems and Data Store/Storage Manager, and then choose Storage Manager Control Panel Applet. Right-click on Storage Manager Control Panel Applet and choose Add to Platform.
- or -
Set SYSGEN_STOREMGR_CPL.

(添加文档组件)
6.For verification purposes, add an application that can create a text file.
Expand the Catalog node, navigate to Core OS/Windows CE Devices/Applications – End User, and then choose WordPad. Right-click on WordPad and choose Add to Platform.
- or -
Set SYSGEN_PWORD.

然后编译烧录到开发板，不挂接硬盘是可以正常启动和使用ＣＥ系统！

但是挂接硬盘后，上电启动ＣＥ系统时，出现如下错误：
ead wince image from flash:
Sector addr on NAND: 0x1f20
TotalSector: 0xc268
LoadAddress: 0x30200000
JumpAddr: 0x30201000
........................
Run wince, JumpAddr = 0x30201000
Clear the memory unused Windows CE Kernel for ARM (Thumb Enabled) Built on Jun 24 2004 at 18:25:00
ProcessorType=0920  Revision=0
sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800 OEMAddressTable = 8c2013bc

Windows CE Firmware Init
INFO: Initializing system interrupts...
INFO: Initializing system clock(s)...
INFO: Initializing driver globals area...
SDMMC config set rGPGCON: fd96abb6
OEMInit Done...
Sp=ffffc7cc
NandFlash FMD_Init
NandFlash FMD_Init Done

Data Abort: Thread=8ffe4000 Proc=8e226070 'filesys.exe'
AKY=00000003 PC=0406f5c0(filesys.exe+0x0005f5c0) RA=0406f2d0(filesys.exe+0x0005f2d0) BVA=04000001 FSR=00000003

然后系统停止启动！

请教各位高人！

 

http://topic.youkuaiyun.com/u/20090614/21/a05dc9ff-47f5-4511-afb5-5136ad99b867.html