ISE中下载程序出错，msk文件缺失问题-优快云博客

本文链接：https://blog.youkuaiyun.com/iteye_7333/article/details/81888644

本文解决了在FPGA烧写过程中出现的特定错误提示。通过分析发现，验证选项使用不当导致无法正确读取配置数据及mask文件缺失。文章提供了两种解决方案：一是移除验证步骤；二是确保使用正确的mask文件。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

原文：http://cathyun.spaces.live.com/blog/cns!7C9B5AD7F583967!1291.entry

今天实验调试时之前一直好好的，突然程序下载不进去了，烧写FPGA的bit文件出现如下报错：

ERROR:Bitstream:2 - The input file "E:\XXX.msk" does not exist. Please check that the specified location is correct and that the bitstream was succesfully created.
ERROR:iMPACT:123 - Mask file E:\XXX.msk is invalid

因为之前从来没有遇到这样的问题，一下子有点懵了，回家google了下，找到比较靠谱的答案：

The -v option you use is to have a Verify carried out on the design after programming. This is where iMPACT will read back the configuration data to determine if the device has been programmed correctly. The .msk file is used to mask out teh dynamic values in the design whiach may have changed. If you have not generated this file or it is not in the directory specified for the bit file you get this error. You can either not use teh -v option or ensure you have the correct .msk file. The ,msk fiel is generated by using the "Create Readback Data files" and "Create Mask File" options in bitgen (-m).

所以：

1，去掉烧写时的Verify。

2，bitgen -m