Sun服务器Solaris10安装步骤 (九)

- Customize Disk: c1t0d0 -------------------------------------------------------
Boot Disk: c1t0d0

Entry: swap Recommended: 0 MB Minimum: 0 MB
======================================================================
Slice Mount Point Size (MB)
0 / 14339
1 swap 8193
2 overlap 69994
3 /opt 26627
4 0
5 0
6 /export/home 20481
7 0
======================================================================
Capacity: 69994 MB
Allocated: 69640 MB
Rounding Error: 2 MB
Free: 352 MB


----------------------------------------------------------------------
Esc-2_OK Esc-4_Options F5_Cancel F6_Help

- File System and Disk Layout ----------------------------------------
The summary below is your current file system and disk layout, based on the
information you've supplied.

NOTE: If you choose to customize, you should understand file systems, their
intended purpose on the disk, and how changing them may affect the operation
of the system.

File sys/Mnt point Disk/Slice Size
======================================================================
/ c1t0d0s0 14339 MB
swap c1t0d0s1 8193 MB
overlap c1t0d0s2 69994 MB
/opt c1t0d0s3 26627 MB
/export/home c1t0d0s6 20481 MB
----------------------------------------------------------------------
Esc-2_Continue F3_Go Back F4_Customize F5_Exit F6_Help


- Mount Remote File Systems? -----------------------------------------
Do you want to mount software from a remote file server? This may be
necessary if you had to remove software because of disk space problems.
----------------------------------------------------------------------
Esc-2_Continue F3_Go Back F4_Remote Mounts F5_Exit F6_Help


- Profile ------------------------------------------------------------
The information shown below is your profile for installing Solaris software.
It reflects the choices you've made on previous screens.
======================================================================
- Installation Option: Initial
| Boot Device: c1t0d0
| Client Services: None
|
| Locales: Great Britain (ISO8859-1)
| System Locale: Great Britain (UTF-8) ( en_GB.UTF-8
|
| Software: Solaris 10, Entire Distribution plus OEM su
|
| File System and Disk Layout: / c1t0d0s0 14339 MB
| swap c1t0d0s1 8193 MB
| /opt c1t0d0s3 26627 MB
| /export/home c1t0d0s6 20481 MB
v

----------------------------------------------------------------------
Esc-2_Begin Installation F4_Change F5_Exit F6_Help
- Warning ------------------------------------------------------------
The following disk configuration condition(s) have been
detected. Errors must be fixed to ensure a successful
installation. Warnings can be ignored without causing the
installation to fail.

WARNING: Unused disk space (c1t0d0)

WARNING: CHANGING DEFAULT BOOT DEVICE
You have either explicitly changed the default boot device, or
accepted the default to "Reconfigure EEPROM". In either case,
the system's EEPROM will be changed so it will always boot
Solaris from the device that you've specified. If this is not
what you had in mind, go back to the disk selection screens and
change the "Reconfigure EEPROM" setting.
----------------------------------------------------------------------
Esc-2_OK F5_Cancel

过程图未copy!